Allocation of the temporary internal buffer will now repeat until a small enough buffer can be
allocated, and only fail if less than a 256 byte block of internal RAM is free.
Adds unit test for the same, and generic test utility for creating memory pressure.
Previously would try allocate buffer of minimum size 16KB not maximum size 16KB, causing
out of memory errors for any large reads, or if less than 16KB contiguous free heap.
Also, if using legacy API and internal allocation failed then implementation would abort()
instead of returning the error to the caller.
Added test for using large buffers in PSRAM.
Closes https://github.com/espressif/esp-idf/issues/4769
Also reported on forum: https://esp32.com/viewtopic.php?f=13&t=14304&p=55972
The NimBLE host buffers that consume a significant amount of memory are
now allocated dynamically.
The advantage is that, the memory can be reclaimed in cases where BLE
is turned off and not required for the current boot cycle
- Add menuconfig option for NimBLE host flow control
- Include changes in `blecent` example from upstream PR!702
- add ble_hs_lock in ble_gap_unpair Upstream PR!584
- ble_hs_hci_rx_evt, upstream PR!738
Closes https://github.com/espressif/esp-idf/issues/4243
The ppp_set_auth() is guard by #if PPP_AUTH_SUPPORT in lwIP, so
make it consistent. This also simplify the code a bit because the code
in #if PAP_SUPPORT guard and #if CHAP_SUPPORT guard are exactly the same.
Once NETIF_PPP_AUTHTYPE_NONE added to esp_netif_auth_type_t, it also allows
setting NETIF_PPP_AUTHTYPE_NONE with this change.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Merges https://github.com/espressif/esp-idf/pull/4639
To allow setting auth_type to PPPAUTHTYPE_NONE, add NETIF_PPP_AUTHTYPE_NONE
to esp_netif_auth_type_t.
So even PAP/CHAP are enabled in lwIP, the application still can set
auth_type to PPPAUTHTYPE_NONE.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Fix following WiFi bugs:
1. Fix crashing during shared WEP connection
2. Remove log "age_bss: null bss
3. Add WiFi stop checking at the beginning of wifi deinit api
4. Fix espnow crash
5. Fix the bug for setting channel when WiFi is no NULL mode
6. Adjust scheme percent when BT is in connected status
7. Fix WiFi stop leads to memory leak
8. Place the Vendor Specific Element at the end of WiFi packet
1. Add an API to set Provisioner static oob value
2. Add an API to deinit BLE Mesh stack
3. Add an API to set Provisioner unicast address
4. Add an API to provision devices with fixed address
5. Add an API to store node composition data
6. Add an API to get node with device uuid
7. Add an API to get node with unicast address
8. Add an API to delete node with device uuid
9. Add an API to delete node with unicast address
10. Add an API for Provisioner to update local AppKey
11. Add an API for Provisioner to update local NetKey
12. Support Provisioner persistent functionality
13. Fix Provisioner entering IV Update procedure
14. Fix an issue which may cause client failing to send msg
15. Use bt_mesh.flags to indicate device role
16. Remove several useless macros
17. Callback RSSI of received mesh provisioning packets
18. Modify the Provisioner disable function
19. Change some log level from debug to info
20. Add parameters to Provisioner bind AppKey completion event
21. Fix node ignoring relay messages issue
22. Support using a specific partition for BLE Mesh
23. Fix compile warning when proxy related macros are disabled
24. Clean up BLE Mesh stack included header files
25. NULL can be input if client message needs no parameters
26. Fix compile warning when BT log is disabled
27. Initilize BLE Mesh stack local variables
28. Support using PSRAM for BLE Mesh mutex, queue and task
29. Add a menuconfig option to enable using memory from PSRAM
30. Clean up sdkconfig.defaults of BLE Mesh examples
Fix bugs about role switch
Fix watchdog timeout when sleep enabled and crash without enabling sw coex
Fix ble crash issue triggered by ble event irq miss(0x20000)
Future events scheduling error in case of wifi and bluetooth.
