Commit graph

7063 commits

Author SHA1 Message Date
Markus Becker
3a71ae8595 bt: PORT_WriteDataCO: fixed a bug, reduced heap memory allocation
* a missing pointer increment caused error, if available was > 0 after the first iteration of while(available) loop.
* changed memory allocation strategy from large fixed size (RFCOMM_DATA_BUF_SIZE) to just the needed
  size, which will be below MTU

Cherry-picked from https://github.com/espressif/esp-idf/pull/1923/
2018-06-13 09:52:02 +10:00
Angus Gratton
e33ec5ccf4 Merge branch 'bugfix/btdm_tx_power_value' into 'master'
fix bluetooth(dual-mode) tx power value

See merge request idf/esp-idf!2503
2018-06-13 07:43:13 +08:00
Angus Gratton
785e9eeb36 Merge branch 'bugfix/esp_timer_set_alarm' into 'master'
esp_timer: remove busy loop in esp_timer_impl_set_alarm

See merge request idf/esp-idf!2436
2018-06-13 07:39:34 +08:00
Ivan Grokhotkov
4359d5985e sleep: make sure input enable is set for EXT0/EXT1 wakeup
Since commit 94250e4, EXT0 wakeup mechanism, when wakeup level was set
to 0, started waking up chip immediately after entering deep sleep.
This failure was triggered in that commit by a change of
RTC_CNTL_MIN_SLP_VAL (i.e. minimum time in sleep mode until wakeup
can happen) from 128 cycles to 2 cycles.

The reason for this behaviour is related to the way input enable (IE)
signal going into an RTC pad is obtained:

    PAD_IE = (SLP_SEL) ? SLP_IE & CHIP_SLEEP : IE,

where SLP_IE, SLP_SEL, and IE are bits of an RTC_IO register related
to the given pad. CHIP_SLEEP is the signal indicating that chip has
entered sleep mode.

The code in prepare_ext{0,1}_wakeup did not enable IE, but did enable
SLP_SEL and SLP_IE. This meant that until CHIP_SLEEP went high, PAD_IE
was 0, hence the input from the pad read 0 even if external signal
was 1. CHIP_SLEEP went high on the 2nd cycle of sleep. So when
RTC_CNTL_MIN_SLP_VAL was set to 2, the input signal from the pad was
latched as 0 at the moment when CHIP_SLEEP went high, causing EXT0
wakeup with level 0 to trigger.

This commit changes the way PAD_IE is enabled: SLP_SEL and SLP_IE are
no longer used, and IE is set to 1. If EXT0 wakeup is used, RTC_IO is
not powered down, so IE signal stays 1 both before CHIP_SLEEP goes
high and after. If EXT1 wakeup is used, RTC_IO may be powered down.
However prepare_ext1_wakeup enables Hold on the pad, locking states
of all the control signals, including IE.

Closes https://github.com/espressif/esp-idf/issues/1931
Closes https://github.com/espressif/esp-idf/issues/2043
2018-06-12 20:25:15 +08:00
Tian Hao
294a4bd1f4 fix bluetootm(dual-mode) tx power value 2018-06-12 19:18:47 +08:00
houchenyao
e5717e365f test: add driver/gpio test case 2018-06-12 19:04:30 +08:00
Jiang Jiang Jian
7aa7b35a95 Merge branch 'bugfix/tw22485_dhcp_offer_mtu' into 'master'
modify dhcp offer MTU to 1500

See merge request idf/esp-idf!2461
2018-06-12 16:32:26 +08:00
Liu Zhi Fu
fc72d53c71 esp32: fix the bug that the first two reboots do full calibration
If the NVS is erased, the first two reboots will do full calibration.
This commit is to fix this issue and only need to do full calibration once.
2018-06-12 15:51:51 +08:00
Angus Gratton
4eda1b7a25 Merge branch 'bugfix/fixes_for_building_with_amazon_freertos' into 'master'
Fixes for building with amazon freertos

See merge request idf/esp-idf!2523
2018-06-12 14:47:34 +08:00
Mahavir Jain
4e43c920d8 freertos: make task{ENTER/EXIT} macros deprecated for external use
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Mahavir Jain
eef8d0f7ed Resolve required include header dependencies in component itself
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Mahavir Jain
636485db8e vfs: change task{ENTER/EXIT}_CRITICAL with port{ENTER/EXIT}_CRITICAL
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Ivan Grokhotkov
f4d09506ad Merge branch 'feature/unit_test_config_components' into 'master'
unit-test-app: allow building subset of tests for a configuration

See merge request idf/esp-idf!2331
2018-06-12 10:01:42 +08:00
Ivan Grokhotkov
7cc7c8a94c Merge branch 'feature/microecc_1_0' into 'master'
micro-ecc: update to v1.0

See merge request idf/esp-idf!2534
2018-06-11 23:32:32 +08:00
Ivan Grokhotkov
7663782e8d unity: allow test task stack size to be configured 2018-06-11 23:26:56 +08:00
Ivan Grokhotkov
b2f498f7da build: allow EXCLUDE_COMPONENTS to contain quotes
'dequote' macro can’t be used at this point yet, use subst directly.
Also prevent EXCLUDE_COMPONENTS from being passed to bootloader build.
2018-06-11 23:26:56 +08:00
Ivan Grokhotkov
9b1876a458 unit-test-app: allow specifying subset of tests for configuration
For some test configurations, not all tests need to be run. This
change allows adding a comment in the configuration file of the
following form:

unit-test-app makefile will use it to determine which components to
build. If the comment is not present, all components will be built
(TESTS_ALL=1).

Also add test configuration for libsodium. It is a separate test
configuration due to the large binary size generated when building
libsodium tests.
2018-06-11 23:26:55 +08:00
Ivan Grokhotkov
3e64318364 Merge branch 'bugfix/performance_tests' into 'master'
test: Tweaks to reduce variation in CI unit tests

See merge request idf/esp-idf!2529
2018-06-11 23:20:45 +08:00
Ivan Grokhotkov
70eed4c284 Merge branch 'docs/update_eclipse-setup' into 'master'
Docs/update_eclipse-setup

See merge request idf/esp-idf!2528
2018-06-11 23:20:24 +08:00
Ivan Grokhotkov
c0ab42a62a Merge branch 'bugfix/ci_remove_stale_submodules' into 'master'
ci: remove stale submodules after checkout

See merge request idf/esp-idf!2533
2018-06-11 12:26:47 +08:00
Angus Gratton
84f78110dd Merge branch 'feature/esp_timer_example' into 'master'
examples: add esp_timer example

See merge request idf/esp-idf!2494
2018-06-11 11:44:45 +08:00
Jiang Jiang Jian
9ea947cd8a Merge branch 'bugfix/tw23171_fix_espnow_bug_when_add_node_in_AP_STA_mode' into 'master'
fix espnow bug when add node in AP+STA mode

See merge request idf/esp-idf!2518
2018-06-11 11:39:01 +08:00
Ivan Grokhotkov
b4e836eb97 esp_timer: test for monotonic values of esp_timer_get_timer in CI
Reduce test time by increasing overflow rate, make test more robust.
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
49d200aaa7 esp_timer: add test for esp_timer_impl_set_alarm
Ref https://github.com/espressif/esp-idf/issues/1891
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
141e51b468 esp_timer: reduce overflow value in unit tests
This allows testing for race conditions which occur near timer
overflow point more effectively.
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
125bbf0882 esp_timer: don’t busy loop in esp_timer_impl_set_alarm
Previously the loop in esp_timer_impl_set_alarm was necessary to catch
the case when timer count wraps around (goes from 2^32 - 1 to 0).
Since ALARM_OVERFLOW_VAL was reduced from 2^32 - 1 to 0xefffffff,
this is no longer necessary.

Fixes https://github.com/espressif/esp-idf/issues/1891
2018-06-11 02:37:19 +00:00
Angus Gratton
03c2678aa6 Merge branch 'bugfix/btdm_fix_include_service_start_handle_error' into 'master'
Component/bt: fix include service start handle error

See merge request idf/esp-idf!2525
2018-06-11 10:36:36 +08:00
Ivan Grokhotkov
7111cdb934 ci: remove stale submodules after checkout
When ‘fetch’ strategy is used, Gitlab removes untracked files before
checking out new revision. However if the new revision doesn’t
include some of the submodules which were present in the old
revision, such submodule directories would not be removed by the
checkout. This extra step ensures that these stale submodules are
removed.
2018-06-10 22:22:26 +08:00
Ivan Grokhotkov
43c779e519 micro-ecc: update to v1.0 2018-06-10 21:20:55 +08:00
Konstantin Kondrashov
3e0ac4db79 partition_table: Expanding the space under the bootloader
Allows you to move the partition table, it gives more space for the bootloader.
Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET.
The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more.

TW14125
2018-06-08 18:47:29 +05:00
Ivan Grokhotkov
03d78e7afb Merge branch 'feature/Add_noinit_rtc_noinit_sections' into 'master'
esp32: Add .noinit and .rtc_noinit sections to the linker script

See merge request idf/esp-idf!1996
2018-06-08 16:01:30 +08:00
zhiweijian
85e88cd0eb Component/bt: fix include service start handle error 2018-06-08 16:00:34 +08:00
Angus Gratton
bcd4fb9944 Merge branch 'doc/jtag_startup_command_fix' into 'master'
docs/jtag: use 'flushregs' instead of 'x $a1=0' in gdbinit

See merge request idf/esp-idf!2520
2018-06-08 15:15:29 +08:00
XuanZe
dc30603242 Translate the resources.rst Merges https://github.com/espressif/esp-idf/pull/1979 2018-06-08 14:58:36 +08:00
Angus Gratton
87077a5478 test: Tweaks to reduce variation in CI unit tests
spi test: Prime the flash cache before each test to minimise flash cache misses.

VFS performance test: Increase the number of runs to minimise influence of an isolated bad run.
2018-06-08 14:42:44 +10:00
Ivan Grokhotkov
f47af6185d docs/jtag: use ‘flushregs’ instead of ‘x $a1=0” in gdbinit
The old command caused was incorrect (x is “examine”, not “execute”)
and caused GDB register update only by chance. This replaces it with
“flushregs” command which purpose is exactly that — force GDB to
fetch registers from the remote.
2018-06-08 11:45:46 +08:00
Ivan Grokhotkov
40596fa55a Merge branch 'feature/host_side_storage_components' into 'master'
Runnable FS components on host

See merge request idf/esp-idf!2431
2018-06-08 11:42:37 +08:00
Jin Fang Cheng Cheng
f5f200ee30 Update eclipse-setup.rst
Ref https://github.com/espressif/esp-idf/pull/1990
2018-06-08 11:01:25 +08:00
Jin Fang Cheng Cheng
f9a3368f28 Update eclipse-setup.rst 2018-06-08 11:00:29 +08:00
Angus Gratton
c99a30a167 Merge branch 'bugfix/wakeup_from_deep_sleep' into 'master'
esp32: Fix not the right time spent in a deep sleep

See merge request idf/esp-idf!2501
2018-06-08 10:40:47 +08:00
Angus Gratton
c8d3c6a494 Merge branch 'feature/monitor_filter_output' into 'master'
idf_monitor: add support for filtering options

See merge request idf/esp-idf!2486
2018-06-08 08:09:40 +08:00
Angus Gratton
be829afe6e Merge branch 'feature/cmake_confserver' into 'feature/cmake'
cmake: Add JSON configuration server for external config tool integration

See merge request idf/esp-idf!2410
2018-06-08 07:32:09 +08:00
Ivan Grokhotkov
705d42dd18 Merge branch 'bugfix/get_power_down_flags' into 'master'
sleep_mode/esp32: Fix a condition to keep power domain enabled during sleep mode

See merge request idf/esp-idf!2515
2018-06-07 20:20:13 +08:00
Ivan Grokhotkov
ab538bb9f3 Merge branch 'feat/spi_master_timing' into 'master'
feature(spi_master): fine tune the timing of spi master

See merge request idf/esp-idf!2301
2018-06-07 20:19:06 +08:00
Angus Gratton
950dd8e3e5 docs: Standardise CMake vs cmake 2018-06-07 15:18:48 +10:00
Angus Gratton
330c6a50e1 ci: Use new host_test tag 2018-06-07 14:23:08 +10:00
Angus Gratton
6065d2fd08 kconfig: Add confserver.py to expose sdkconfig to clients 2018-06-07 14:23:08 +10:00
Ivan Grokhotkov
2f5cd89833 examples: add esp_timer example 2018-06-07 11:59:36 +08:00
Angus Gratton
34401afe39 Merge branch 'feature/ci_host_test_tag' into 'master'
ci: Use new common host_test tag for host-side testing

See merge request idf/esp-idf!2514
2018-06-07 11:59:25 +08:00
zhangyanjiao
1bab62a6d6 modify dhcp offer MTU to 1500 2018-06-07 10:03:26 +08:00