Commit graph

607 commits

Author SHA1 Message Date
wangmengyang
8de9149b11 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-14 14:56:29 +08:00
qiyueixa
3c3e375d8d mesh: bugfix
1. fix failture of mesh stop caused by block-sending.
2. fix when FIXED_ROOT is set, 2nd layer devices can not receive mesh event ESP_ERR_MESH_NO_PARENT_FOUND.
3. fix when FIXED_ROOT is set and the root turns off mesh function, 2nd layer devices do not look for new parents.
4. add APIs esp_mesh_disconnect() and esp_mesh_connect().
5. disconnect from parent/router when the DSSS channel in received beacon is different from the home channel.
6. remove nvs task to release 3k bytes memory.
2018-11-22 00:39:02 +08:00
morris
cb98f5a814 ethernet: fix some bugs in phy&mac driver
1. Original register mapping for LAN8720 has some registers that doesn't exist/support.
So just remove them, and fix the power and init function for LAN8720.
2. GPIO16 and GPIO17 is occupied by PSRAM, so only ETH_CLOCK_GPIO_IN mode is supported in that case if using PSRAM.
3. Fix bug of OTA failing with Ethernet
4. Fix bug of multicast with Ethernet
5. Fix potential memory leak
2018-11-19 14:55:43 +08:00
qiyuexia
841a6dcd9a mesh: update libs
1. fix ap_loss that occurs when the parent turns off the mesh function and becomes a normal WiFi with a different SSID.
2. add an event MESH_EVENT_NETWORK_STATE that contains information about whether there is a root in the current network.
3. modify the mechanism of mesh IE update.
4. fix a problem in the process of re-voting to select the root, the device that does not meet the conditions of being a root votes for itself.
5. fix an issue that occurs in esp_mesh_recv_toDS() when stopping the mesh.
6. when the user specifies a parent for the device, the device will set the authmode and password of its AP mode to the same value as the specified parent.
7. add two disconnected reason codes MESH_REASON_EMPTY_PASSWORD and MESH_REASON_PARENT_UNENCRYPTED.
2018-11-06 23:00:59 +08:00
Jiang Jiang Jian
97e3542947 Merge branch 'bugfix/release_some_memory_on_single_core_mode' into 'master'
release memory not used in single core mode

See merge request idf/esp-idf!2733
2018-10-30 15:53:31 +08:00
Renz Christian Bagaporo
5a83347bec event: Implement event loop library 2018-10-26 13:14:19 +08:00
Angus Gratton
705d184af2 Merge branch 'bugfix/missing_header_file' into 'master'
esp32: Add missing header file in esp_task.h

See merge request idf/esp-idf!3353
2018-10-26 12:19:50 +08:00
Mahavir Jain
b3aff63db4 app_update: fix intermittent failure with firmware updates
Routine `spi_flash_cache2phys` sometimes return incorrect value,
resulting in failure in getting currently running ota partition.
This in turn aborts firmware update process.This issue was more
prominent with SPIRAM enabled cases.

Fix ensures proper cache guards during `spi_flash_cache2phys`, and
also for few other similar APIs.

In addition, `esp_ota_get_running_partition` has also been optimized
to save currently running partition for subsequent invocations.

Fixes https://github.com/espressif/esp-idf/issues/2451
2018-10-18 04:38:31 +00:00
Ivan Grokhotkov
18684f53ee Merge branch 'bugfix/uart_wait_idle' into 'master'
uart: fix uart_tx_wait_idle to wait for fifo empty

See merge request idf/esp-idf!3489
2018-10-18 11:25:59 +08:00
Liu Zhi Fu
1afb8001dd esp32: fix WiFi timer inaccurate bug
Fix the bug that WiFi timer is not accurate when sleep is on
2018-10-17 09:47:25 +08:00
Ivan Grokhotkov
508fb79a26 uart: fix uart_tx_wait_idle to wait for fifo empty
In some cases, when data was just written into UART FIFO, transmitter
state could be still zero while the FIFO did contain some data.
This resulted in uart_tx_wait_idle occasionally returning before all
the data was sent out.
Fix by checking both UART transmitter state and TX FIFO count.
2018-10-15 20:08:16 +08:00
Jeroen Domburg
81e35a142a Spiram: Add option to reserve MMU banks; add himem API to make use of those banks 2018-10-15 14:32:58 +08:00
Angus Gratton
31cf117404 Merge branch 'feature/bss_seg_in_external_memory' into 'master'
memory:   support .bss segment can be in psram

See merge request idf/esp-idf!2236
2018-10-10 14:40:21 +08:00
Angus Gratton
fc2230aeda Merge branch 'feature/error_check_without_abort' into 'master'
esp32: Add macro to check a condition without abort

See merge request idf/esp-idf!3348
2018-10-10 14:31:38 +08:00
Angus Gratton
f1ccd47fdb Merge branch 'bugfix/fix_psram_eid' into 'master'
bugfix(psram): fix psram eid

See merge request idf/esp-idf!3392
2018-10-10 11:37:43 +08:00
Roland Dobai
d4e572bdb1 esp32: Add macro to check a condition without abort
Closes https://github.com/espressif/esp-idf/issues/2325
2018-10-09 08:57:23 +02:00
chenjianqiang
a10b7e892c bugfix(psram): fix psram driver
1. remove use EID to distinguish psram voltage
2. 1V8 64Mbit psram and 3V3 64Mbit psram use the same psram driver(standard spi interface)
3. set cs hold time register as 1
2018-10-08 19:55:13 +08:00
Angus Gratton
127693126a esp_err: Don't compile in error message strings in "silent assertions" mode
Reported on forum https://esp32.com/viewtopic.php?f=13&t=7396&p=31419#p31419
2018-10-02 17:00:57 +10:00
Ivan Grokhotkov
94e5ffdedc Merge branch 'bugfix/workaround_free_peripherals_isr_when_using_dual_core' into 'master'
driver(interrupt): fix the issue that interrupt might be allocated and freed on different cores.

See merge request idf/esp-idf!3152
2018-09-30 21:42:52 +08:00
Ivan Grokhotkov
5ebf4f7022 Merge branch 'feature/move_rtc_data_rtc_rodata_to_RTC_FAST_seg' into 'master'
esp32: Add option to place .rtc_data and .rtc_rodata into the RTC_FAST segment

See merge request idf/esp-idf!2128
2018-09-27 13:05:06 +08:00
kooho
bbca0e46ed driver(interrupt): fix the issue that interrupt might be allocated and freed on different cores
closes https://github.com/espressif/esp-idf/issues/2211
2018-09-26 10:31:09 +08:00
Ivan Grokhotkov
4ff262ecff ipc: initialise automatically, if called from the app 2018-09-25 15:13:47 +08:00
Darian Leung
3c362f4d75 esp32: Add missing header file in esp_task.h
This commit adds a missing header file in esp_task.h
required for configMAX_PRIORITIES.

Closes #2341
2018-09-25 11:21:23 +08:00
Angus Gratton
a4aadd1926 Merge branch 'feature/nvs_encryption' into 'master'
nvs_flash: Add support for nvs encryption

See merge request idf/esp-idf!2700
2018-09-25 08:15:55 +08:00
Sagar Bijwe
48fccbf5dd nvs_flash: Add support for nvs encryption 2018-09-24 11:25:21 +05:30
qiyueixa
9c4cc55012 mesh: bugfix
1. suppport mesh type, mesh ID, router and IE crypt func&key at any time after mesh is initalized.
2. support modify parent at any time after mesh is configured.
3. modify manual networking example.
4. update header file.
5. fix issues in root conflicts handling.
6. add max length of beacon to menuconfig.
7. fix issue when received a beacon without DSSS.
2018-09-23 21:11:02 +08:00
TianZhongXing
974112378b feature: allow .bss segment in external memory 2018-09-21 16:20:26 +08:00
Jiang Jiang Jian
91f579d714 Merge branch 'feature/wifi_update_csi_api_and_fix_phy_dport_access_issue' into 'master'
esp32: update API to set CSI channel filter and HT_LTF data generating

See merge request idf/esp-idf!3180
2018-09-12 21:29:29 +08:00
Alex Lisitsyn
ec5eb1e5c2 esp32: Add option to place.rtc_data and .rtc_rodata into the RTC_FAST segment
Changes:
KConfig: The option CONFIG_ESP32_RTCDATA_IN_FAST_MEM is added in Kconfig file for esp32 component.
esp32.common.ld: added support of RTC_DATA_ATTR, RTC_RODATA_ATTR data placement into appropriate segment according to Kconfig option.
esp32.ld: linker script is modified to set alias for memory segment selected by Kconfig option to place data. The segments for force placement are added for RTC_FAST_ATTR, RTC_SLOW_ATTR attributes.
esp_attr.h: added new attributes RTC_FAST_ATTR, RTC_SLOW_ATTR for force placement into fest/slow memory.
test_rtc_fast.c: Added unit test cases to check data placement into appropriate memory segment.
Updated documentation for RTC_DATA_ATTR, RTC_FAST_ATTR, RTC_SLOW_ATTR in deep_sleep_stub.rst file.

TW#18001
Closes https://github.com/espressif/esp-idf/issues/1553
2018-09-12 09:25:13 +02:00
XiaXiaotian
7d56115992 esp32: update API to set CSI channel filter and HT_LTF data generating
method and apply pre-read APB register dport access method to PHY

Close: https://github.com/espressif/esp-idf/issues/2337
2018-09-07 11:05:59 +08:00
Ivan Grokhotkov
13107d5968 Merge branch 'feature/light_sleep_gpio_uart_wakeup' into 'master'
sleep: add support for GPIO and UART wakeup from light sleep

See merge request idf/esp-idf!3004
2018-09-07 10:33:33 +08:00
Ivan Grokhotkov
09d0b8d47b sleep: allow esp_sleep_get_wakeup_cause to be used for light sleep 2018-09-06 15:42:34 +08:00
Ivan Grokhotkov
cf4f2c19e4 sleep: allow disabling all wakeup sources 2018-09-06 15:40:46 +08:00
Ivan Grokhotkov
75629b7fc3 sleep: add support for GPIO and UART wakeup from light sleep 2018-09-06 15:40:46 +08:00
Konstantin Kondrashov
38098b713f esp32/sleep: Add a function to disable logging from ROM code 2018-09-04 16:03:18 +08:00
Angus Gratton
83a179abb0 esp32: Add esp_fill_random() function
Convenience function to fill a buffer with random bytes.

Add some unit tests (only sanity checks, really.)
2018-09-03 04:39:45 +00:00
Angus Gratton
27a1758908 Merge branch 'mesh/rewrite_docs' into 'master'
docs/rewrite_mesh_docs

See merge request idf/esp-idf!2990
2018-09-03 10:52:33 +08:00
Darian Leung
f4c3917712 docs/rewrite_mesh_docs
The following commit rewrites the ESP-MESH docs. This commit includes
new diagrams and a structure approach to the mesh docs. Some mesh api references
have also been modified.
2018-09-02 21:34:21 +08:00
zhangyanjiao
b952031947 fix the esp_wifi_disconnect() err when wifi is not started or inited
Closes: https://github.com/espressif/esp-idf/issues/2336
2018-08-31 10:49:52 +08:00
qiyuexia
91dd05662d mesh: bugfix and add two APIs
1. new APIs: esp_mesh_get_subnet_nodes_num() and esp_mesh_get_subnet_nodes_list().
2. fix hard to find the parent during connect.
3. disable Wi-Fi channel switch function.
4. fix a typo of MESH_EVENT_NO_PARENT_FOUND.
2018-08-27 19:12:40 +08:00
Liu Zhi Fu
6a080febbc esp32: update wifi lib to fix several WiFi bugs
Fix following WiFi bugs:
1. Shouldn't scan when connect
2. Check beacon length in modem sleep
3. Fix the bug that AP may deauth wrong station when inactivity timer expires
4. Fix the bug that WiFi assert the system when receiving empty MCS in association response frame
2018-08-26 12:47:24 +08:00
Ivan Grokhotkov
90f5456dba Merge branch 'feature/rtc_cpu_freq_config' into 'master'
soc/rtc: Refactoring, support CPU frequencies lower than XTAL

See merge request idf/esp-idf!2856
2018-08-22 11:32:08 +08:00
Ivan Grokhotkov
bec70ce298 esp32: use new CPU frequency setting API 2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
05a5410033 esp_clk.h: add esp_clk_xtal_freq
This adds a user API for getting the XTAL frequency
2018-08-21 13:02:03 +08:00
Ivan Grokhotkov
8403adf4e0 docs: add API reference section for esp_system.h 2018-08-20 16:49:20 +08:00
Ivan Grokhotkov
0aa384d40c esp32: add API to get reset reason 2018-08-20 16:49:20 +08:00
Konstantin Kondrashov
a8e46775c6 soc/rtc_wdt: Add API functions for rtc_wdt
Added functions:
rtc_wdt_protect_off/on
rtc_wdt_set_length_of_reset_signal
rtc_wdt_set_stage
rtc_wdt_set_time
rtc_wdt_feed
rtc_wdt_disable/enable
2018-08-14 17:48:02 +05:00
qiyuexia
93c0c8da6b mesh: modify parent switch mechanism
1. modify parent switch mechanism.
2. fix non-root doesn't clear the layer value in nvs.
3. fix retransmit the remove announcement packets.
4. add API esp_mesh_flush_upstream_packets().
5. automatically adjust passsive scan time based on the change of beacon interval.
2018-08-08 13:51:05 +08:00
Deng Xin
65c441a891 Wifi: bug fix of may connect to wrong AP in all channel scan
1. enable threshold in all channel scan
2. bug fix of may connect to an open AP even set password in all channel scan
2018-08-06 19:54:24 +08:00
Jiang Jiang Jian
ad739ee791 Merge branch 'feature/support_64mbit_psram' into 'master'
feature(psram): add support for 64MBit psram of 1.8v and 3.3v.

See merge request idf/esp-idf!2696
2018-08-03 17:59:36 +08:00