Commit graph

84 commits

Author SHA1 Message Date
Ivan Grokhotkov
15ec487fde Merge branch 'feature/esp32_d2wd_support' into 'master'
ESP32-D2WD support

Support ESP32-D2WD with integrated flash in ESP-IDF.

Includes fix for https://github.com/espressif/esp-idf/issues /521


See merge request !639
2017-04-14 20:57:39 +08:00
Angus Gratton
85e76a7cfc spiflash ROM functions: Remove Quad I/O mode enable/disable code from flash ROM functions
Confusion here is that original ROM has two functions:

* SPIReadModeCnfig() - sets mode, calls enable_qio_mode/disable_qio_mode
* SPIMasterReadModeCnfig() - As above, but doesn't set QIO mode in status register

However we never want to use the ROM method to set/clear QIO mode flag, as not all flash chips work this way. Instead we
do it in flash_qio_mode.c in bootloader.

So in both cases (ROM or "patched ROM") we now call SPIMasterReadModeCnfig(), which is now named
esp_rom_spiflash_config_readmode().
2017-04-13 17:54:42 +10:00
Ivan Grokhotkov
af0ecca492 add test case for invalid cache access interrupt 2017-04-13 15:27:39 +08:00
Alexey Gerenkov
0860f46220 spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip
1) fixed SPI_read_status: added check for flash busy flag in matrix mode
2) fixed SPI_page_program: enable write before writing data to SPI FIFO
3) SPI flash ROM funcs replacement is controlled via menuconfig option
2017-04-11 10:51:19 +08:00
Ivan Grokhotkov
92436021ab spi_flash: fix race condition in s_flash_op_complete access
Flash operation complete flag was cleared by the core initiating flash
operation. If the other core was running an ISR, then IPC task could
be late to enter the loop to check s_flash_op_complete by the time next
flash operation started. If the flag is cleared on the CPU waiting on
this flag, then the race condition can not happen.
2017-03-28 01:34:17 +08:00
Angus Gratton
8352e7e9ec unit test: Measure test wall time with CCOUNT, so it includes time w/ interrupts off 2017-03-22 15:35:54 +08:00
Angus Gratton
d8fda48551 spi_flash: Split large SPI flash operations into parts, allowing preemption
* Erase range operations allow preemption after each block or sector.
* Write operations allow preemption every 8KB of data.
* Reado operations allow preemption every 16KB of data.
2017-03-22 15:35:54 +08:00
Ivan Grokhotkov
d790300215 spi_flash: fix stale data being read from mmaped region
The issue that cache entries are not invalidated correctly sometimes
can also be reproduced for non-encrypted flash as well.
This change updates the workaround to do Cache_Flush, enabling it for
non-encrypted flash, and adds a unit test.
2017-03-04 17:48:44 +08:00
Ivan Grokhotkov
fa09c8af61 spi_flash: fix partitions order
Pointer to the tail of linked list was never set, so partitions were
added to the head, instead of adding them to the tail.
2017-03-04 15:34:03 +08:00
Angus Gratton
3442d4d463 spi_flash: Add spi_flash_cache_enabled() test function 2017-03-03 15:33:23 +11:00
Ivan Grokhotkov
8911e666a0 Merge branch 'feature/docs_partition_ota_flash' into 'master'
Partition/SPI/OTA docs & OTA new functionality

* Update partition, SPI flash & OTA docs to reflect functionality changes
* Refactor OTA implementation to perform checks mentioned in API doc
* Add new functions to OTA API: esp_ota_get_running_partition() & esp_ota_get_next_update_partition() functions
* Add spi_flash_cache2phys() & spi_flash_phys2cache() functions to support esp_ota_get_running_partition()


See merge request !513
2017-03-03 11:27:01 +08:00
Ivan Grokhotkov
f3687f7177 spi_flash: fix memory leak when spi_flash_mmap arguments are invalid
Check src_addr and size first, then allocate new_entry.
2017-02-28 15:11:54 +08:00
Ivan Grokhotkov
75115e1d83 spi_flash: fix mmap not working for SPI_FLASH_MMAP_INST 2017-02-24 21:50:05 +08:00
Ivan Grokhotkov
cbb71baca9 spi_flash: protect spi_flash_unlock
spi_flash_unlock was missing spi_flash_guard_start, which caused cache
to be enabled during unlock operation, causing hard-to-trace crashes
and cache data corruption.
2017-02-22 12:51:16 +08:00
Angus Gratton
f687725e97 unit tests: Use a unit test app partition table, configure spi_flash to use data partition 2017-02-22 10:26:04 +11:00
Angus Gratton
4170b8c32e partition iterator: Free iterator when reaching end of linked list 2017-02-22 10:26:04 +11:00
Angus Gratton
902382f622 ota ops: Verify partition argument passed to esp_ota_begin() 2017-02-22 10:26:04 +11:00
Angus Gratton
25f739c183 ota ops: Add new functions esp_ota_get_next_update_partition / esp_ota_get_running_partition
* Update OTA example to use these.
* Refactor esp_ota_begin() to return ESP_ERR_OTA_PARTITION_CONFLICT as documented
2017-02-22 10:24:42 +11:00
Angus Gratton
6a2d152086 spi_flash tests: Refactor mmap tests to be run in any order 2017-02-22 10:22:50 +11:00
Angus Gratton
093dd98101 spi_flash: Add new phys2cache & cache2phys functions to query flash cache mappings 2017-02-22 10:22:50 +11:00
Ivan Grokhotkov
e76c187efb spi_flash: protect esp_intr_noniram_{disable,enable} in 1-core config
MR !441 (7c155ab) has fixed issue with esp_intr_noniram_{disable,enable}
calls not being properly protected by spi_flash_op_{lock,unlock}.
Unit test was added, but the unit test environment tests only dual-core
config. Similar issue was present in the code path for the single-core
config, where esp_intr_noniram_{disable,enable} calls were unprotected.

This change fixes the protection issue and updates the unit test to
run properly in single core config as well.

The issue with running unit tests for single core config will be
addressed in a separate MR.
2017-02-21 21:57:53 +08:00
Angus Gratton
1f3a2e900c docs: Improve/clarify partition, OTA & SPI flash docs
Related to #313 https://github.com/espressif/esp-idf/issues/313
2017-02-20 15:31:42 +11:00
Ivan Grokhotkov
25f05bef71 Merge branch 'bugfix/OTA_and_flash_encryption_incompatible' into 'master'
bootloader_support: fix bug OTA & flash encryption incompatible

github issue:https://github.com/espressif/esp-idf/issues/253

See merge request !464
2017-02-15 13:24:10 +08:00
Alexey Gerenkov
04acc88023 esp32: Fixes watchdog problem when printing core dump to uart
Also fixes generation of core dumps when flash cache is disabled
2017-02-01 18:39:28 +03:00
Angus Gratton
eea2788f5a OTA: Fix issues with encrypted OTA
- OTA source can write non-16-byte multiples of data
- Assumption that empty ota_data is 0xFFFFFFFF untrue when encrypted
2017-01-26 18:52:35 +11:00
Angus Gratton
d8aae55eeb Flash encryption: Temporary fix for issue with stale cache reads
Seems doing certain kinds of short reads while flash encryption is
enabled will return stale data. This fixes it, but is probably a
little heavy-handed performance wise.
2017-01-26 18:29:18 +11:00
Angus Gratton
d4462664b7 spi_flash: Move FLASH_PAGE_SIZE constant into esp_spi_flash.h 2017-01-20 19:50:01 +08:00
Angus Gratton
14aa1d1b3e docs: spi_flash: Add flash encryption ops, remove boilerplate 2017-01-20 19:50:01 +08:00
Angus Gratton
adc590ff69 spi_flash_write_encrypted: Allow 16-byte aligned block writes
As each 32 byte write has two identical 16 byte AES blocks, it's
possible to write them separately.
2017-01-20 19:48:46 +08:00
Angus Gratton
36ccdee6ec spi_flash: Flush flash cache if flash_mmap()ing a written-to page
Without this, it's possible for stale information to be read from
cache via mmap, even if the MMU table entry had been invalidated
prior to writing flash (if  the same MMU table entry was re-used after
writing flash.)
2017-01-20 19:48:46 +08:00
Angus Gratton
95c150fe2c spiflash: Add spi_flash_read_encrypted() function 2017-01-20 19:48:46 +08:00
Ivan Grokhotkov
7c155ab647 Merge branch 'bugfix/flash_op_unpinned_task' into 'master'
fixes for issues observed when using spi_flash

This MR fixes three unrelated issues:

- Race condition in spi_flash_enable_interrupts_caches_and_other_cpu
  when operations on unpinned tasks are performed.
  The issue is reported in https://github.com/espressif/esp-idf/pull/258

- esp_intr_noniram_disable doesn’t disable interrupts when compiled in
  release mode. This issue manifested itself with an illegal instruction
  exception when task WDT ISR was called at the time when flash was
  disabled.
  Fixes https://github.com/espressif/esp-idf/issues/263.

- Tick hooks on CPU1 were not called if CPU0 scheduler was disabled for
  significant amount of time (which could happen when doing flash erase).
  The issue manifested itself as “INT WDT timeout on core 1” error.
  Fixes https://github.com/espressif/esp-idf/issues/219.

See merge request !441
2017-01-19 10:14:34 +08:00
Ivan Grokhotkov
3128f2b004 Merge branch 'bugfix/partition_write_encrypted' into 'master'
Allow writes to encrypted partitions

There is a size alignment requirement but it is checked by
spi_flash_write_encrypted. However, this check flat-out bans encrypted
writes.

Original PR on Github: https://github.com/espressif/esp-idf/pull/249

See merge request !432
2017-01-18 18:32:03 +08:00
antti
f8b5c29346 esp32: add [ignore] tag to some unit test cases for CI
Add ignore tag on unit test cases that are not supported in CI yet
2017-01-18 17:08:20 +08:00
Ivan Grokhotkov
4676d159ad spi_flash: fix race condition when doing operations in unpinned tasks
spi_flash_enable_interrupts_caches_and_other_cpu function used to enable
non-IRAM interrupts after giving up flash operation lock, which would
cause problems if another task was waiting on the lock to start a flash
operation. In fact, non-IRAM interrupts should be re-enabled before the
task scheduler is resumed. Otherwise non-pinned task can be moved to the
other CPU due to preemption, causing esp_intr_noniram_enable to be
called on the other CPU, causing an abort to be triggered.

Fixes the issue reported in
https://github.com/espressif/esp-idf/pull/258
2017-01-18 15:07:27 +08:00
Deomid Ryabkov
71ab455c87 Allow writes to encrypted partitions
There is a size alignment requirement but it is checked by
spi_flash_write_encrypted. However, this check flat-out bans encrypted
writes.
2017-01-17 12:32:01 +08:00
Ivan Grokhotkov
075446318d spi_flash: define spi_flash_guard_{start,stop} with IRAM_ATTR
These functions are marked as inline and are called from functions which are in IRAM.
In release (-Os) builds, the compiler may decide not to inline these functions.
Placing these functions into IRAM explicitly works around this.
2017-01-17 00:42:55 +08:00
Alexey Gerenkov
ad66fbe5ad esp32: Fixes issues discussed during code review of MR!341
The following issues mentioned during MR!341 review were fixed:
1) Core dump test application description
2) Usage of CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH and CONFIG_ESP32_ENABLE_COREDUMP_TO_UART
3) FLASH_GUARD_START macro usage is fixed in flash API
4) Core dump module logging facility
5) cache util functions doc updated
6) interactive delay before print core dump to uart
7) core dump partion support in build system
2017-01-12 19:38:19 +03:00
Alexey Gerenkov
50b3ce616f esp32: Adds documentation and comments to core dump feature files 2017-01-11 20:51:28 +03:00
Alexey Gerenkov
39ddc7b836 esp32: Fixes several issues in core dump feature
1) PS is fixed up to allow GDB backtrace to work properly
2) MR!341 discussion: in core dump module: esp_panicPutXXX was replaced by ets_printf.
3) MR!341 discussion: core dump flash magic number was changed.
4) MR!341 discussion: SPI flash access API was redesigned to allow flexible critical section management.
5) test app for core dump feature was added
6) fixed base64 file reading issues on Windows platform
7) now raw bin core file is deleted upon core loader failure by epscoredump.py
2017-01-11 20:51:28 +03:00
Alexey Gerenkov
4a3e160888 esp32: Add core dump saving to flash feature
Complimentary changes:
1) Partition table definitions files with core dump partition
2) Special sub-type for core dump partition
3) Special version of spi_flash_xxx
4) espcoredump.py is script to get core dump from flash and print useful info
5) FreeRTOS API was extended to get tasks snapshots
2017-01-11 20:51:28 +03:00
Angus Gratton
ab5915ff8b spi_flash: Standardise argument types & names used for flash offsets
Closes github #88: https://github.com/espressif/esp-idf/issues/88
2016-12-22 15:07:02 +11:00
Deomid Ryabkov
d288a3d053 Remove alignment reqs from spi_flash_{read,write} 2016-12-15 10:07:31 +11:00
Angus Gratton
bab1d49f1f Merge branch 'feature/esptool_flash_encryption' into 'master'
Flash encryption support

Flash encryption support in build system, tooling

To come in future MR:
* On-device key generation on first boot (for production devices), need to finalise testing of bootloader entropy seeding.
* spi_flash_encrypted_write to support non-32-byte block writes (at least optionally.)
* I think a lot of the bootloader_support component can possibly be rolled into "spiflash" and other components, to use a common API.

See merge request !240
2016-12-12 06:50:46 +08:00
Jeroen Domburg
bf57594ebe Merge branch 'feature/intr_alloc' into 'master'
Add dynamic interrupt allocation mechanism

This adds:
- Dynamic allocation of interrupts. Pass it the features of the interrupt you want, it'll set you up with an int.
- Shared interrupts. Enables multiple peripheral drivers to use the same interrupt. 
- Marking what interrupts are fully executable from IRAM; if an int isn't marked like that it will get disabled once flash cache gets disabled.

Also:
- Modifies driver to be in line with these changes

See merge request !254
2016-12-09 14:00:39 +08:00
Angus Gratton
8ba75a1e9f SPI flash: Block erase size 64KB not 32KB
Reverts changes made in 9f9d92b2df
2016-12-09 14:18:58 +11:00
Jeroen Domburg
655fd2986a Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts
to be marked specifically as having a handler that's all in IRAM.
2016-12-08 12:39:33 +08:00
Angus Gratton
9eb135fd73 Flash encryption: Support enabling flash encryption in bootloader, app support
* App access functions are all flash encryption-aware
* Documentation for flash encryption
* Partition read/write is flash aware
* New encrypted write function
2016-12-01 23:49:12 -08:00
Tian Zhong Xing
72422b32dc feature/fota_ops_api: add ota core api implement 2016-11-28 17:12:57 +08:00
Angus Gratton
be53a6950c spi_flash_erase_range: Allow for 32KB blocks not 64KB blocks
SPI flash hardware sends 52h command, which is a 32KB erase.

There is a matching bug in the ROM SPIEraseArea code, unless
flashchip->block_size is modified first.
2016-11-24 18:05:06 +11:00