Commit graph

1430 commits

Author SHA1 Message Date
Jiang Jiang Jian
4056d1e2bf Merge branch 'bugfix/tw23325_replace_WLOGE_to_printf_when_wifi_not_init' into 'master'
WLOGE/WLOGW/WLOGI/WLOGD do anything when wifi is not initialized

See merge request idf/esp-idf!2554
2018-06-15 11:31:02 +08:00
zhangyanjiao
bf78d3c4b1 WLOGE, WLOGW, WLOGI, WLOGD do anything when wifi is not initialized 2018-06-14 19:30:04 +08:00
Ivan Grokhotkov
589e8db4dd Merge branch 'bugfix/spi_gpio_deinit' into 'master'
fix(spi): Fix several init/deinit issues of spi pins

See merge request idf/esp-idf!2522
2018-06-14 19:21:34 +08:00
Ivan Grokhotkov
8674a34fd6 Merge branch 'bugfix/ext_wakeup_input_enable' into 'master'
sleep: make sure input enable is set for EXT0/EXT1 wakeup

See merge request idf/esp-idf!2542
2018-06-14 19:03:01 +08:00
Jiang Jiang Jian
768f880b04 Merge branch 'bugfix/wifi_correct_modem_sleep_api_description' into 'master'
correct modem sleep API description

See merge request idf/esp-idf!2548
2018-06-14 15:50:08 +08:00
Jiang Jiang Jian
54d882101c Merge branch 'bugfix/fix_two_times_full_calibration' into 'master'
esp32: fix the bug that the first two reboots do full calibration

See merge request idf/esp-idf!2540
2018-06-14 15:49:03 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
Xia Xiaotian
6e9070b6d9 correct modem sleep API description 2018-06-13 15:44:59 +08:00
Jiang Jiang Jian
8e7dfb230f Merge branch 'bugfix/crosscore_handle_yield_iram' into 'master'
esp32: Move esp_crosscore_isr_handle_yield() to IRAM

See merge request idf/esp-idf!2544
2018-06-13 11:54:04 +08:00
Angus Gratton
f6442abdeb esp32: Move esp_crosscore_isr_handle_yield() to IRAM
Also adds a hint to inline, as this is only called in one place
it seems like a natural candidate...

Closes https://github.com/espressif/esp-idf/issues/2055
2018-06-13 11:36:15 +10:00
Angus Gratton
785e9eeb36 Merge branch 'bugfix/esp_timer_set_alarm' into 'master'
esp_timer: remove busy loop in esp_timer_impl_set_alarm

See merge request idf/esp-idf!2436
2018-06-13 07:39:34 +08:00
Ivan Grokhotkov
4359d5985e sleep: make sure input enable is set for EXT0/EXT1 wakeup
Since commit 94250e4, EXT0 wakeup mechanism, when wakeup level was set
to 0, started waking up chip immediately after entering deep sleep.
This failure was triggered in that commit by a change of
RTC_CNTL_MIN_SLP_VAL (i.e. minimum time in sleep mode until wakeup
can happen) from 128 cycles to 2 cycles.

The reason for this behaviour is related to the way input enable (IE)
signal going into an RTC pad is obtained:

    PAD_IE = (SLP_SEL) ? SLP_IE & CHIP_SLEEP : IE,

where SLP_IE, SLP_SEL, and IE are bits of an RTC_IO register related
to the given pad. CHIP_SLEEP is the signal indicating that chip has
entered sleep mode.

The code in prepare_ext{0,1}_wakeup did not enable IE, but did enable
SLP_SEL and SLP_IE. This meant that until CHIP_SLEEP went high, PAD_IE
was 0, hence the input from the pad read 0 even if external signal
was 1. CHIP_SLEEP went high on the 2nd cycle of sleep. So when
RTC_CNTL_MIN_SLP_VAL was set to 2, the input signal from the pad was
latched as 0 at the moment when CHIP_SLEEP went high, causing EXT0
wakeup with level 0 to trigger.

This commit changes the way PAD_IE is enabled: SLP_SEL and SLP_IE are
no longer used, and IE is set to 1. If EXT0 wakeup is used, RTC_IO is
not powered down, so IE signal stays 1 both before CHIP_SLEEP goes
high and after. If EXT1 wakeup is used, RTC_IO may be powered down.
However prepare_ext1_wakeup enables Hold on the pad, locking states
of all the control signals, including IE.

Closes https://github.com/espressif/esp-idf/issues/1931
Closes https://github.com/espressif/esp-idf/issues/2043
2018-06-12 20:25:15 +08:00
Liu Zhi Fu
fc72d53c71 esp32: fix the bug that the first two reboots do full calibration
If the NVS is erased, the first two reboots will do full calibration.
This commit is to fix this issue and only need to do full calibration once.
2018-06-12 15:51:51 +08:00
Jiang Jiang Jian
9ea947cd8a Merge branch 'bugfix/tw23171_fix_espnow_bug_when_add_node_in_AP_STA_mode' into 'master'
fix espnow bug when add node in AP+STA mode

See merge request idf/esp-idf!2518
2018-06-11 11:39:01 +08:00
Ivan Grokhotkov
b4e836eb97 esp_timer: test for monotonic values of esp_timer_get_timer in CI
Reduce test time by increasing overflow rate, make test more robust.
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
49d200aaa7 esp_timer: add test for esp_timer_impl_set_alarm
Ref https://github.com/espressif/esp-idf/issues/1891
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
141e51b468 esp_timer: reduce overflow value in unit tests
This allows testing for race conditions which occur near timer
overflow point more effectively.
2018-06-11 02:37:19 +00:00
Ivan Grokhotkov
125bbf0882 esp_timer: don’t busy loop in esp_timer_impl_set_alarm
Previously the loop in esp_timer_impl_set_alarm was necessary to catch
the case when timer count wraps around (goes from 2^32 - 1 to 0).
Since ALARM_OVERFLOW_VAL was reduced from 2^32 - 1 to 0xefffffff,
this is no longer necessary.

Fixes https://github.com/espressif/esp-idf/issues/1891
2018-06-11 02:37:19 +00:00
Konstantin Kondrashov
3e0ac4db79 partition_table: Expanding the space under the bootloader
Allows you to move the partition table, it gives more space for the bootloader.
Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET.
The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more.

TW14125
2018-06-08 18:47:29 +05:00
Ivan Grokhotkov
03d78e7afb Merge branch 'feature/Add_noinit_rtc_noinit_sections' into 'master'
esp32: Add .noinit and .rtc_noinit sections to the linker script

See merge request idf/esp-idf!1996
2018-06-08 16:01:30 +08:00
Angus Gratton
c99a30a167 Merge branch 'bugfix/wakeup_from_deep_sleep' into 'master'
esp32: Fix not the right time spent in a deep sleep

See merge request idf/esp-idf!2501
2018-06-08 10:40:47 +08:00
Konstantin Kondrashov
7e2a3da643 esp32: Fix not the right time spent in a deep sleep
Before entering the deep sleep, the RTC and FRC counters are synchronized. Updating the boot_time.
Added a unit test for this case.
Fixed warnings for MULTIPLE_STAGES

Closes https://github.com/espressif/esp-idf/issues/1840
2018-06-06 18:59:30 +05:00
zhangyanjiao
5fec589c38 fix espnow bug when add node in AP+STA mode 2018-06-06 20:44:19 +08:00
Konstantin Kondrashov
28507920c8 sleep_mode/esp32: Fix a condition to keep power domain enabled during sleep mode 2018-06-06 17:35:21 +05:00
Jiang Jiang Jian
8a4c9d7dfb Merge branch 'doc/wifi_channel_state_information' into 'master'
add document of channel state information

See merge request idf/esp-idf!2468
2018-06-04 17:59:05 +08:00
Jiang Jiang Jian
40da291d5d Merge branch 'bugfix/wifi_fix_a_few_bugs' into 'master'
Fix a few WiFi bugs

See merge request idf/esp-idf!2491
2018-06-01 18:37:50 +08:00
Ivan Grokhotkov
28877e7868 Merge branch 'feature/esp_error_check_prints_error_text' into 'master'
ESP_ERROR_CHECK converts error code to text

See merge request idf/esp-idf!2488
2018-06-01 16:43:37 +08:00
Xia Xiaotian
7d5ef3c765 add document of channel state information 2018-06-01 15:45:00 +08:00
XiaXiaotian
5081714c53 Fix a few WiFi bugs
1. fix rx state parse if CSI is enabled.

2. make smartconfig channel timer thread safe.

3. fix sniffer filter mask to keep the same as IDF.
2018-06-01 14:25:43 +08:00
Roland Dobai
07acbb5664 ESP_ERROR_CHECK converts error code to text
If CONFIG_ESP_ERR_TO_NAME_LOOKUP is enabled, ESP_ERROR_CHECK
prints error message in addition to the error code.
2018-05-31 12:53:37 +02:00
Liu Zhi Fu
4afa5d0d29 esp32/wpa_supplicant: fix some bugs introduced by wifi os adapter
1. Fix the WiFi/BT coexist bug
2. Fix WPA2 enterprise example crash bug
3. Add size and version check for crypto type struct
4. Add MD5 check for crypto type header file
2018-05-31 17:09:40 +08:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Ivan Grokhotkov
834c056234 xtensa: remove unused header files 2018-05-31 02:21:36 +00:00
zhangyanjiao
9bd38c0d86 fix espnow watchdog when modify 2018-05-30 17:19:46 +08:00
Ivan Grokhotkov
cb649e452f remove executable permission from source files 2018-05-29 20:07:45 +08:00
Angus Gratton
8cf82be917 esp32: Component needs public dependency on tcpip_adapter
Because of esp_event.h

Closes https://github.com/espressif/esp-idf/issues/1954
2018-05-29 16:34:45 +10:00
Angus Gratton
979568fa0b docs: Separate "build and flash" into building then flashing
Explains idf.py build as mentioned here: https://github.com/espressif/esp-idf/issues/1906#issuecomment-387557050
2018-05-29 16:34:45 +10:00
Angus Gratton
cc104eb05b cmake: Add sdkconfig.h directory to include paths list not just compiler args
Also move into 'build/config/' subdir, remove creation of empty include/config dir.
2018-05-29 16:34:45 +10:00
Angus Gratton
9e09df25fb Merge branch 'bugfix/rtc_vddsdio_details' into 'master'
Fix minor VDDSDIO details

See merge request idf/esp-idf!2449
2018-05-28 08:51:02 +08:00
XiaXiaotian
b32b93a607 Add OS adapter to WiFi driver
1.add os adapter to wifi driver
2.type of encrypt funcs not correct
2018-05-26 17:22:23 +08:00
Angus Gratton
d775cc4c4c soc: Fix description of rtc_config_t.tieh, add macros
Usage of TIEH was correct but description had 1.8V & 3.3V backwards.

Add macro definitions for TIEH values to improve readability.
2018-05-25 14:58:37 +10:00
qiyueixa
feaa6e8a8f mesh: add manual networking function
1. add mesh_assoc_t to esp_mesh_internal.h file.
2. rename "node" to "device" in esp_mesh.h.
3. add MESH_EVENT_SCAN_DONE event.
4. add APIs esp_mesh_scan_get_ap_record() and esp_mesh_scan_get_ap_ie_len() to get scan results.
5. modify API esp_mesh_set_self_organized() by adding parameter "select_parent".
6. modify API esp_mesh_set_parent() by adding parameter "parent_mesh_id"
7. add manual networking example.
2018-05-23 18:09:12 +08:00
Jiang Jiang Jian
f453877759 Merge branch 'feature/multi_antenna_v3.1' into 'master'
esp32: add multiple antenna

See merge request idf/esp-idf!2400
2018-05-22 23:04:01 +08:00
Liu Zhi Fu
04c74efedd esp32: add multiple antenna
1. Support multiple antenna support
2. libphy.a is updated to v3910
2018-05-22 22:28:00 +08:00
Jiang Jiang Jian
b19afed31f Merge branch 'bugfix/some_changes_relating_to_phy_v3900' into 'master'
esp32: some changes relating to phy v3900

See merge request idf/esp-idf!2421
2018-05-22 21:09:05 +08:00
Jiang Jiang Jian
72c2a6f1c6 Merge branch 'feature/proto-client' into 'master'
HTTP Client

See merge request idf/esp-idf!1521
2018-05-22 21:06:46 +08:00
Liu Zhi Fu
67424816cc esp32: some changes relating to phy v3900
1. Store the calibration data to NVS if PHY does full calibration because of calibration data checksum failure
2. Pass the station's mac to PHY for checksum calculation
2018-05-22 14:16:09 +08:00
Angus Gratton
b8312a26c0 Merge branch 'feature/sdio_slave' into 'master'
feature(sdio_slave): add support for sdio_slave

See merge request idf/esp-idf!1829
2018-05-22 09:43:35 +08:00
Konstantin Kondrashov
e5b280f173 dport: Bigfix dport_read code move to IRAM
A new method of workaround an error with DPORT is to ensure that the APB is read and followed by the DPORT register without interruptions and pauses. This fix places this implementation in the IRAM to exclude errors associated with the cache miss.
2018-05-21 22:00:51 +05:00
Michael (XIAO Xufeng)
c73575de4f feat(sdio_slave): add headers for sdio slave components: slc, host, hinf 2018-05-21 23:48:33 +08:00
Jiang Jiang Jian
95c3bc39f8 Merge branch 'feature/wifi_channel_state_information' into 'master'
add Channel State Information(CSI) support

See merge request idf/esp-idf!2373
2018-05-21 14:14:51 +08:00
Jiang Jiang Jian
adcad91c55 Merge branch 'feature/btdm_hfp_hf' into 'master'
component/bt: implement HFP Hands Free Unit Role

See merge request idf/esp-idf!2306
2018-05-21 13:56:52 +08:00
wangmengyang
4c4e143a2f component/bt: implement HFP Hands Free Unit Role 2018-05-21 11:33:30 +08:00
Angus Gratton
6363396eba Merge branch 'feature/freertos_tickless_idle' into 'master'
freertos,esp32: automatic light sleep support

See merge request idf/esp-idf!2247
2018-05-21 10:59:00 +08:00
Tuan PM
ff528d13c7 Add esp_http_client
Add error handling for http client

set ssid password correct with Example_WIFI test, and clear password before free

Fixed the CI failure due to HTTP errror names
2018-05-21 09:35:07 +07:00
Angus Gratton
03414b1f39 Merge branch 'bugfix/reset_some_peripherals_when_cpu_start' into 'master'
driver:   Reset  communication peripherals when cpu start up.

See merge request idf/esp-idf!2296
2018-05-21 09:53:42 +08:00
Angus Gratton
a79116a23e Merge branch 'feature/gcov_dbg_stubs' into 'master'
Feature/gcov dbg stubs

See merge request idf/esp-idf!1494
2018-05-21 08:07:49 +08:00
Xia Xiaotian
7f8811ea14 add Channel State Information(CSI) support 2018-05-20 19:25:25 +08:00
qiyueixa
bb9e73c864 mesh: update libs
1. use pbkdf2_sha1() to encrypted mesh ie key.
2. fix esp_mesh_waive_root().
3. fix esp_mesh_stop().
4. fix xon issues.
2018-05-20 15:28:38 +08:00
Jiang Jiang Jian
1f7b41e206 Merge branch 'feature/add_event_SYSTEM_EVENT_AP_STAIPASSIGNED' into 'master'
add event SYSTEM_EVENT_AP_STAIPASSIGNED

See merge request idf/esp-idf!2202
2018-05-19 17:04:24 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
zhangyanjiao
3f031cdd9d add event SYSTEM_EVENT_AP_STAIPASSIGNED 2018-05-19 13:14:12 +08:00
Alexey Gerenkov
c1b6a37bb1 esp32: Adds GCOV debug stubs support
Adds the following functionality
 - Debug stubs infrastructure
 - Stub for retrieveing GCOV data without user source code modification
2018-05-18 16:16:03 +03:00
kooho
ef39c09bc1 driver: reset communication peripherals when the cpu starts. 2018-05-18 14:41:58 +08:00
Deng Xin
8b389419ab (wifi): Add more information about wifi config
1. Update libphy.a to v3900
2. Update librtc.a to v238
3. add scan_method, sort_method and threshold when invoke esp_wifi_get_config()
4. add rssi of each STA in softAP list
5. add country information in scan result
6. add noise floor in rx pkt

Closes https://github.com/espressif/esp-idf/issues/1095
Closes https://github.com/espressif/esp-idf/issues/1723
Closes https://github.com/espressif/esp-idf/issues/1483
2018-05-18 11:55:55 +08:00
Ivan Grokhotkov
028fbb58e8 freertos,esp32: automatic light sleep support 2018-05-18 03:14:46 +00:00
Liu Zhi Fu
4e9ea81208 esp32: support to create wifi task on any core
Support to create WiFi task on any core.
Closes https://github.com/espressif/esp-idf/issues/968
2018-05-17 22:04:08 +08:00
Deng Xin
54d9a392e4 wifi: add set factory information feature by customer in wps 2018-05-17 16:45:53 +08:00
Alex Lisitsyn
44b1bc0ab9 esp32: Add .noinit and .rtc_noinit sections to the linker script
Added .rtc_noinit and .noinit section definitions into linker file /esp32/ld/esp32.common.ld.
The macro __NOINIT_ATTR, RTC_NOINIT_ATTR declared in esp32/esp_attr.h file.
Added unit test file to test added behavior for noinit variables and its attributes.
Added documentation changes for new added attributes.
Make some corrections after code review:
The linker file has been corrected to place noinit section before bss_start to make it safer.
Documentation file has been modified to clarify reset behavior of allocated data .
Corrected typos in test_noinit.c and removed assertion of noinit variable to avoid possible issues with ROM boot loader memory allocation.
The linker file has been corrected to place noinit section before bss_start to make it safer.
Documentation file has been modified to clarify reset behavior of allocated data .
Corrected typos in test_noinit.c and removed assertion of noinit variable to avoid possible issues with ROM boot loader memory allocation.
Update test_noinit.c file to address RTCWDT_RTC_RESET reset reason instead of POWERON_RESET.
Test optimized to pass automated unit testing.
esp32: Add .noinit and .rtc_noinit sections to the linker script
Update of general-notes.rst documentation to fomat examples as code and attributes as identifiers.
Test test_noinit.c corrected to pass automated testing (support ofTEST_CASE_MULTIPLE_STAGES())

https://ezredmine.espressif.cn:8765/issues/15878
2018-05-16 17:33:37 +05:00
XiaXiaotian
40efc36849 Fix a few WiFi bugs
1. remove rc when ap not found

   closes issue: https://github.com/espressif/esp-idf/issues/1797

2. allocate mimo packet to internal memory

3. use FRC2 timer instead of WDEV_NOW() for modem sleep to calculate
   TBTT time.

   It fixes the bug that TBTT will be incorrect if beacon is lost.
2018-05-16 18:50:28 +08:00
Jiang Jiang Jian
c54a679a41 Merge branch 'bugfix/fix_interrupt_list_insert_issue' into 'master'
esp32: fix interrupt list insert issue

See merge request idf/esp-idf!2391
2018-05-16 18:18:58 +08:00
Liu Zhi Fu
846b848bfc esp32/docs: fully support esp_wifi_80211_tx
Closes https://github.com/espressif/esp-idf/issues/1256
Closes https://github.com/espressif/esp-idf/issues/1332
2018-05-16 13:37:54 +08:00
Angus Gratton
d1066e9d7f Merge branch 'feature/dport_access' into 'master'
soc: Dport access with pre-read register APB

See merge request idf/esp-idf!2257
2018-05-15 15:32:28 +08:00
Angus Gratton
662fe55996 Merge branch 'bugfix/select_rtc_slow_clk' into 'master'
esp32/clk: Fix starting rtc oscillator if it bad

See merge request idf/esp-idf!2215
2018-05-15 12:57:22 +08:00
Konstantin Kondrashov
9ad0760b9d esp32/clk:Fix starting rtc oscillator if it is bad
If the RTC crystal is bad or has no matched capacitance, then you do not need to start such the crystal. It is necessary to determine this case, output an error (about impossibility to start from the oscillator) and start from the internal RC of the chain.

Reduced the default value of the number of bootstrap cycles. Because we can oscillating the oscillator which then stops. (in Kconfig). Changed from 100 to 5.

The number of calibration cycles has been increased. It is the main criterion for estimating the launch of an oscillator. A large increase leads to an increase in the load time, as well as the stability of recognition of this case. (in Kconfig).
Changed from 1024 to 3000.
2018-05-15 08:59:15 +05:00
Jiang Jiang Jian
97a228e6ab Merge branch 'bugfix/rename_clk_rst_bits_for_spi' into 'master'
rename clock enable and reset bits for SPI modules

See merge request idf/esp-idf!2293
2018-05-15 09:49:56 +08:00
Konstantin Kondrashov
8f80cc733d soc: Change DPORT access
When two CPUs read the area of the DPORT and the area of the APB, the result is corrupted for the CPU that read the APB area.
And another CPU has valid data.

The method of eliminating this error.
Before reading the registers of the DPORT, make a preliminary reading of the APB register.
In this case, the joint access of the two CPUs to the registers of the APB and the DPORT is successful.
2018-05-14 17:54:57 +05:00
jack
c384fa2492 rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
XiaXiaotian
57297cf7b7 add sniffer control packet support 2018-05-14 14:16:03 +08:00
Liu Zhi Fu
1c81e4be60 esp32: fix interrupt list insert issue
If the allocated interrupt list is not empty and the new item will be inserted
as the header of the list, insert_vector_desc() causes crash because pre is
null. This commit fix this issue.
2018-05-14 14:13:08 +08:00
He Yin Ling
adc3315677 Merge branch 'test/add_unit_test_jobs' into 'master'
ci: increase number of unit test jobs, temporarily disable light sleep test for short durations

See merge request idf/esp-idf!2386
2018-05-14 14:06:05 +08:00
Angus Gratton
6817088ce4 Merge branch 'feature/mbedtls_2_9_0' into 'master'
Re-add mbedTLS as a submodule, update to 2.9.0

See merge request idf/esp-idf!2367
2018-05-14 09:15:44 +08:00
Ivan Grokhotkov
1b7ed6455b esp32/test: temporarily disable test for light sleep duration
Until the issue in CI is debugged
2018-05-11 18:15:58 +08:00
Jiang Jiang Jian
a5f36ec2d5 Merge branch 'feature/wifi_refactor_smartconfig' into 'master'
refactor smartconfig

See merge request idf/esp-idf!2205
2018-05-11 16:23:22 +08:00
Ivan Grokhotkov
827772df69 Merge branch 'bugfix/light_sleep_wdt_fix' into 'master'
Fix occasional WDT reset in light sleep test

See merge request idf/esp-idf!2374
2018-05-11 14:55:51 +08:00
XiaXiaotian
0033c3ef3a refactor smartconfig
move wifi part to wifi lib and lwip part to idf
2018-05-11 14:49:35 +08:00
zhangyanjiao
be76260d81 wifi: fix some potential thread safe issue
change some API function to throw event:

esp_wifi_deauth_sta
esp_wifi_get_country
esp_wifi_ap_get_sta_list
esp_wifi_sta_get_ap_info
esp_wifi_stop
esp_wifi_get_channel
esp_wifi_get_protocol
esp_wifi_get_bandwidth
2018-05-10 16:24:43 +08:00
Ivan Grokhotkov
dbc919eff5 mbedtls: update usage of mbedtls_aes_encrypt/decrypt 2018-05-09 23:15:28 +08:00
Ivan Grokhotkov
8c307a5720 sleep: fix deadlock in esp_timer_impl_advance after light sleep
When light sleep is started, the other CPU gets halted using DPORT
stall mechanism. This can happen while it is inside an esp_timer
critical section, which may lead to a deadlock. This change adds
functions to take and release esp_timer lock before entering
DPORT critical section, preventing the deadlock.
2018-05-09 22:52:50 +08:00
Ivan Grokhotkov
296b280801 esp_timer: fix esp_timer_impl_advance not triggering expired timers 2018-05-09 22:52:41 +08:00
Jiang Jiang Jian
b9aee83d9b Merge branch 'feature/put_supplicant_source_code_from_VNC_to_IDF' into 'master'
wpa_supplicant: move part of codes to IDF

See merge request idf/esp-idf!2272
2018-05-09 15:19:37 +08:00
Deng Xin
b00d256d5b wpa_supplicant:move part of codes to IDF 2018-05-09 10:44:35 +08:00
Angus Gratton
bb1f3ae264 Merge branch 'feature/psram_configure_in_runtime' into 'master'
feature(psram): update psram and flash SPI frequency in runtime

See merge request idf/esp-idf!1776
2018-05-08 15:23:47 +08:00
Tian Hao
8cd9deed5c component/esp32 : improve wifi and bluetooth coexistence performance
1. update coexistence and wifi libraries. Coexist version update to
v0.9.2
2. Cancel the restriction of use AMPDU when SW_COEXIST_ENABLE is y.
2018-05-07 19:55:41 +08:00
Liu Zhi Fu
a9dfa06125 esp32: fix two wifi bugs
1. Fix the bug that WiFi receives duplicate MPDU
2. Deauth the station if soft-AP already has max WiFi connections
2018-05-06 17:29:06 +08:00
Jiang Jiang Jian
25440cbc23 Merge branch 'bugfix/tw12351_wifi_lock_op' into 'master'
esp32: optimize wifi lock

See merge request idf/esp-idf!2345
2018-05-04 19:27:14 +08:00
Liu Zhi Fu
017f109f6e esp32: optimize wifi lock
Replace portENTER_CRITICAL/portEXIT_CRITICAL with semaphore lock if
the protected resource is only accessed by different tasks
2018-05-04 10:36:04 +08:00
Liu Zhi Fu
402dee17a1 esp32: fix potential PHY calibration bug
1. Add error log if failed to store calibration version/mac/data
2. Change the NVS calibration version/mac/data store sequence
3. Pass the init_data instead of NULL to esp_phy_rf_init() in esp_phy_load_cal_and_init()
2018-05-03 15:48:14 +08:00
Jiang Jiang Jian
444d6606e7 Merge branch 'bugfix/mark_auto_connect_api_as_obsolete' into 'master'
esp32: mark WiFi auto connect API as deprecated

See merge request idf/esp-idf!1970
2018-05-03 10:40:27 +08:00
Angus Gratton
ec536b3961 Merge branch 'bugfix/wifi_log_level' into 'master'
wifi: Set default wifi library log level based on sdkconfig

See merge request idf/esp-idf!2334
2018-05-03 10:21:19 +08:00
Ivan Grokhotkov
0d65f3b7f9 Merge branch 'bugfix/light_sleep_fixes' into 'master'
light sleep fixes

See merge request idf/esp-idf!2242
2018-05-02 20:09:36 +08:00
Angus Gratton
b9126e69bc wifi: Set default wifi library log level based on sdkconfig
Has to be set at runtime, due to precompiled wifi libraries.

Prompted by discussion on forum: https://esp32.com/viewtopic.php?f=2&t=5570&p=24216#p24216
2018-05-02 15:11:21 +10:00
Liu Zhi Fu
c23915939d esp32: mark WiFi auto connect API as obsolete
Mark esp_wifi_set/get_auto_connect as obsolete
2018-05-02 09:54:31 +08:00
Angus Gratton
858b95a924 cmake: Add build system tests 2018-04-30 09:59:20 +10:00
Angus Gratton
1cb5712463 cmake: Add component dependency support
Components should set the COMPONENT_REQUIRES & COMPONENT_PRIVATE_REQUIRES variables to define their
requirements.
2018-04-30 09:59:20 +10:00
Angus Gratton
b57843b66a cmake: Linker scripts need to account for .c.obj extension as well as .o 2018-04-30 09:59:20 +10:00
Angus Gratton
12be399762 cmake: Add link-time dependencies for linker script files
Requires some hackery around limitations in CMake's LINK_DEPENDS
2018-04-30 09:59:20 +10:00
Angus Gratton
bc1693aae3 cmake: Fix SPIRAM options 2018-04-30 09:59:20 +10:00
Angus Gratton
88df8fd293 cmake: Use cmake_lint project, tidy up all CMake source files 2018-04-30 09:59:20 +10:00
Angus Gratton
efb5928934 idf.py build & flash tool
Generate flasher args files & .json project info file as part of cmake build
2018-04-30 09:59:20 +10:00
Angus Gratton
cb99531d15 cmake: Generate PHY init data partition as part of the build 2018-04-30 09:59:20 +10:00
Angus Gratton
4f1a856dbf cmake: Remove defaults for COMPONENT_SRCDIRS, COMPONENT_SRCS, COMPONENT_ADD_INCLUDEDIRS
* Philosophical: "explicit is better than implicit".
* Practical: Allows useful errors if invalid directories given in components as the defaults aren't
  always used. Also trims the -I path from a number of components that have no actual include
  directory.
* Simplifies knowing which components will be header-only and which won't
2018-04-30 09:59:20 +10:00
Angus Gratton
ce6748873d cmake: Add embedding files in components support
Add subscribe_publish AWS example and fixes to allow it to build.
2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
qiyueixa
ebd1849e18 mesh: add fix root function 2018-04-26 21:15:35 +08:00
Ivan Grokhotkov
94250e42a0 sleep: optimize light sleep wakeup latency 2018-04-26 19:36:47 +08:00
Ivan Grokhotkov
487210221b esp_timer: add internal function to adjust time 2018-04-26 18:52:45 +08:00
Ivan Grokhotkov
4ba19abeb6 esp_timer: add a function to get next alarm time 2018-04-26 14:39:54 +08:00
Jiang Jiang Jian
37513cd738 Merge branch 'feature/wifi_add_wifi_event_mask' into 'master'
add WiFi event mask API

See merge request idf/esp-idf!2072
2018-04-26 14:27:42 +08:00
Jiang Jiang Jian
9b9eb7e724 Merge branch 'bugfix/fix_some_wifi_phy_mode_bugs' into 'master'
esp32: fix some wifi phy mode bugs

See merge request idf/esp-idf!2294
2018-04-26 10:27:32 +08:00
Angus Gratton
d9cbfe42f9 Merge branch 'bugfix/log_macro_statements' into 'master'
log: Make ESP_LOGx macros into single statements

See merge request idf/esp-idf!2275
2018-04-26 08:05:49 +08:00
Angus Gratton
2f318d16fa log: Make ESP_LOGx macros into single statements
Requires a semicolon after any use (previously this was optional due to trailing } after expansion)

Closes https://github.com/espressif/esp-idf/issues/1757
2018-04-26 09:08:07 +10:00
Liu Zhi Fu
f5ae421e14 esp32: fix some wifi phy mode bugs
Fix several WiFi phy mode bugs
2018-04-25 20:32:18 +08:00
XiaXiaotian
364c15b9f8 add WiFi event mask API 2018-04-25 19:25:43 +08:00
Liu Zhi Fu
2461a780aa more 2018-04-23 19:09:46 +08:00
Deng Xin
aab573746e Bug fix of authmode change event peg core in wep mode
auth mode change event will report continous in wep mode due to wrong original auth record

close github issue https://github.com/espressif/esp-idf/issues/1804
2018-04-23 14:25:36 +08:00
Jiang Jiang Jian
e37ceaed32 Merge branch 'bugfix/tw18453_fix_ap_eapol_retry_bug' into 'master'
esp32: fix soft-AP eapol retry issue

See merge request idf/esp-idf!2264
2018-04-22 16:37:24 +08:00
Liu Zhi Fu
db5f927087 esp32: fix the bug that soft-AP fails to retry eapol
Fix the issue that soft-AP fails to retry eapol frame when multiple
stations connects it at the same time.

More
2018-04-22 10:19:31 +08:00
Wangjialin
b1dcb52fec feature(psram): configure flash and psram speed during runtime
1. Bootloader reads SPI configuration from bin header, so that the burning configuration can be different with compiling configuration.
2. Psram mode init will overwrite original flash speed mode, so that users can change psram and flash speed after OTA.
3. Flash read mode(QIO/DIO…) will not be changed in app bin. It is decided by bootloader, OTA can not change this mode.
4. Add read flash ID function, and save flash ID in g_rom_flashchip
5. Set drive ability for all related GPIOs
6. Check raise VDDSDIO voltage in 80Mhz mode
7. Add check flash ID and update settings in bootloader
8. Read flash ID once and keep in global variable
9. Read flash image header once and reuse the result

Tested cases:
1. Test new and old version of bootloader
boot Flash 20M —> app Flash 80M + Psram 80M
boot Flash 40M —> app Flash 80M + Psram 80M
boot Flash 80M —> app Flash 80M + Psram 80M
boot Flash 20M —> app Flash 80M + Psram 40M
boot Flash 40M —> app Flash 80M + Psram 40M
boot Flash 80M —> app Flash 80M + Psram 40M
boot Flash 20M —> app Flash 40M + Psram 40M
boot Flash 40M —> app Flash 40M + Psram 40M
boot Flash 80M —> app Flash 40M + Psram 40M
2. Working after esp_restart reboot.
2018-04-20 20:51:44 +08:00
Mahavir Jain
441b4a9742 esp32: fix few components with dependency on networking stack
* Move smartconfig to its component directory, it should be possible to override
  this as whole component
* Fix few header includes related to lwIP networking stack

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-19 18:28:55 +05:30
Ivan Grokhotkov
2d598d6fb7 esp_timer: use _ISR version of port{ENTER,EXIT}_CRITICAL from ISR 2018-04-19 18:28:55 +05:30
Ivan Grokhotkov
f65870566a crosscore_int: use _ISR version of portENTER/EXIT_CRITICAL in ISR 2018-04-19 18:28:55 +05:30
qiyueixa
899f2fa1ed mesh: update mesh libs
1. fix issues on sending beacon caused by too much tx retries on other packets.
2. modify not to scan if rc exists when connect.
3. modify scan dwell time to default 120ms fo root.
2018-04-17 11:49:54 +00:00
qiyueixa
92fd4c42e1 mesh: update mesh libs
1. fix a bug in initliazing map beacon interval.
2. fix not send MESH_EVENT_ROUTING_TABLE_REMOVE when MESH_NWK_CHILD_DISCONNECTED.
3. fix a bug in returning roots ie len.
2018-04-13 11:52:31 +08:00
Ivan Grokhotkov
bdadd95dd7 Merge branch 'feature/wwrite_string_for_idf' into 'master'
Enable -Wwrite-strings when compiling IDF's own C files

See merge request idf/esp-idf!2193
2018-04-11 14:59:08 +08:00
Ivan Grokhotkov
907fc1167a gpio: add special GPIO signal values 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
2522c1b2f9 Merge branch 'bugfix/rtc_clk_fixes' into 'master'
Power management and RTC fixes

See merge request idf/esp-idf!2131
2018-04-10 18:17:02 +08:00
Roland Dobai
744c2dcdd9 Resolve problems found by enabling -Wwrite-strings compilation flag 2018-04-10 08:53:43 +02:00
Angus Gratton
2bfef060ba Merge branch 'bugfix/small_fixes_from_github' into 'master'
Bugfix/small fixes from github

See merge request idf/esp-idf!2200
2018-04-10 09:19:19 +08:00
Angus Gratton
58ed6cc9af Merge branch 'bugfix/wifi_ps_modem' into 'master'
wifi: Add WIFI_PS_MODEM for backwards compatibility with V3.0 API

See merge request idf/esp-idf!2203
2018-04-10 09:18:53 +08:00
Angus Gratton
97a382077f wifi: Add WIFI_PS_MODEM for backwards compatibility with V3.0 API 2018-04-09 16:55:38 +10:00
Tian Hao
1bde34c1f1 component/esp32 : remove pm gpio dbg 2018-04-09 14:33:48 +08:00
Anton Maklakov
046ff2e628 Make error codes looks like literals in the code of them (easy for searching). Minor fixes, typos 2018-04-09 13:54:18 +10:00
Mixerito
9f39411e80 esp32: get_chip_info_esp32() return correct model number
out_info->model was zeroed by memset

Merges https://github.com/espressif/esp-idf/pull/1760
2018-04-09 12:28:23 +10:00
Fredrik
97c6a94a03 Bugfix GPIO_DIS_OUTPUT to work with pin 32 and up
Merges https://github.com/espressif/esp-idf/pull/1796
2018-04-09 12:28:23 +10:00
Xia Xiaotian
e727582180 Fix two WiFi and LWIP typos
1. close github issue: https://github.com/espressif/esp-idf/issues/1792
    2. close github issue: https://github.com/espressif/esp-idf/issues/1781
2018-04-05 11:46:42 +08:00
qiyueixa
2984cdbbe3 add mesh feature 2018-04-04 22:57:45 +08:00
Tian Hao
58e7464dc0 component/esp32 : clear some minor thingsw about PM and coexistence 2018-04-03 20:13:49 +08:00
Ivan Grokhotkov
139d49894c Merge branch 'feature/deactivate_wakeup_trigger' into 'master'
esp32: Add deactivation of wake up trigger for different sources

See merge request idf/esp-idf!2079
2018-04-03 15:19:10 +08:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
Jiang Jiang Jian
21099c10f4 Merge branch 'feature/support_enrollee_feature_in_APSTA_mode' into 'master'
feature/support WPS enrollee in APSTA mode

See merge request idf/esp-idf!2120
2018-03-30 16:14:43 +08:00
Alex Lisitsyn
cffab50ac3 esp32: Deactivate wakeup trigger after first wakeup
The files updated according to code review discussions.
In the sleep_modes.c removed immidiate disable of ULP  mode and leave just trigger deactivation.
The esp_sleep.h is updated to have the same defines for source as esp_sleep_wakeup_cause_t.
Updated documentation in sleep_modes.rst file to include cross references and address esp_sleep_wakeup_cause_t type.
The get_time_ms() is updated to explicitly use fabs(dt) instead of abs(dt) in  test_sleep.c.
Some other minor changes in test_sleep.c unit test.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-29 11:24:59 +05:00
Roland Dobai
7c4b3d50f8 Make error codes globally unique 2018-03-27 08:12:54 +02:00
Ivan Grokhotkov
2e7613b656 Merge branch 'feature/use_esp_err_to_name' into 'master'
Use esp_err_to_name in examples & optionally disable it in Kconfig

See merge request idf/esp-idf!2013
2018-03-27 11:50:21 +08:00
Ivan Grokhotkov
db44a719fb pm: add unit test for configuration changes 2018-03-27 11:20:55 +08:00
Ivan Grokhotkov
94014a9a51 pm: handle the case of 2MHz frequency
It is not possible to generate 1 MHz REF_TICK from 2 MHz APB clock
(this is a limitation of REF_TICK divider circuit). Since switching
REF_TICK frequency is something we would like to avoid (to maintain
UART output even with DFS), 2 MHz frequency has been marked as
unsupported.
2018-03-27 11:20:55 +08:00
Ivan Grokhotkov
839c665c92 pm: fix initialisation only done in dual core mode
Introduced in 9377d4ac. Accidentally put the new code block under an
2018-03-27 11:20:54 +08:00
Ivan Grokhotkov
fe5d294f6c pm: handle changes to the PM_MODE_ACTIVE frequency
The issue would manifest itself in cases when switching from PM
configuration like {active=160MHz, idle=80MHz} to {active=80MHz,
idle=80Mhz}. After the configuration was changed, PM logic would
think that current frequency was 80MHz and would not do any further
switching. In fact, frequency was still 160MHz.
2018-03-27 11:20:54 +08:00
Ivan Grokhotkov
1517aeda6c pm: fix calculation of maximum of two frequencies
The old code calculated MAX() of two enum values, but CPU frequency
enum values are not ordered (2MHz goes after 240MHz). This caused
incorrect configuration to be set.
2018-03-27 11:20:53 +08:00
Deng Xin
6c3bdd45cf feature/support WPS enrollee in APSTA mode
Add the feature WPS enrollee in APSTA mode

close github issue: https://github.com/espressif/esp-idf/issues/1608
2018-03-23 15:41:59 +08:00
Ivan Grokhotkov
27bf18ad6b Merge branch 'test/wifi_stop_deinit' into 'master'
test(wifi): add test for wifi stop and deinit.

See merge request idf/esp-idf!2022
2018-03-23 13:45:20 +08:00
Ivan Grokhotkov
887b6e2925 Merge branch 'bugfix/rtc_clk_32k_bootstrap' into 'master'
bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC

See merge request idf/esp-idf!2085
2018-03-21 18:38:49 +08:00
Konstantin Kondrashov
f7df532ec0 bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC
1. External 32kHz crystal is started for too long or it may not start at all. It is often observed at the first start.
2. At the first start, it is possible that the crystal did not start. And the recorded period was recorded as 0. Which led to a division error by zero during the transition to the deep sleep mode (Maybe somewhere else).
3. Added a unit test to test a new method of oscillation an external crystal.
4. Added a new method of oscillating of an external crystal. The legs of the crystal are fed with a 32 kHz frequency.

The new method eliminates these errors.

Added unit test: `\esp-idf\components\soc\esp32\test\test_rtc_clk.c`: `make TEST_COMPONENTS=soc`
- 8 Test starting external RTC crystal. Will pass.

`Bootstrap cycles for external 32kHz crystal` - is specified in the file Kconfig by default 100.

QA tested a new method of oscillation the crystal on 25 boards. The supply of square waves on the crystal showed a 100% result in contrast to the previous method of launching the crystal. After the tests, the old method was deleted.

Closes TW19143
2018-03-21 13:27:56 +05:00
Jiang Jiang Jian
8478823039 Merge branch 'bugfix/dfs_rtc_fixes' into 'master'
DFS related fixes

See merge request idf/esp-idf!2102
2018-03-21 12:02:48 +08:00
Ivan Grokhotkov
7167ad45ab pm: improve debug output from esp_pm_dump_locks
- separate mode stats from lock stats by an extra comment line
- add CPU frequency column to the mode stats
- don’t print a row for light sleep if light sleep is not enabled
2018-03-20 18:08:19 +08:00
Ivan Grokhotkov
9377d4acd4 pm: fix incorrect configuration at startup
s_cpu_freq_by_mode array was statically initialised with 80MHz CPU
frequency in CPU_MAX and APB_MAX modes, but sdkconfig setting for the
CPU frequency could have been different. For the case of 240MHz CPU
frequency, this would cause a frequency switch between 240MHz and
80MHz to happen, even though such switch is not supported in the fast
path switching functions used by the DFS implementation.

This fixes the issue by moving initialisation into esp_pm_impl_init,
which is called at startup before the first mode switch can happen.

Fixes https://github.com/espressif/esp-idf/issues/1729.
2018-03-20 18:06:58 +08:00
Liu Zhi Fu
21c0b59315 esp32: optimize WiFi TX
1. Optimize TX retry counter
2. Optimize TX timeout
2018-03-20 15:24:32 +08:00
Alex Lisitsyn
1e9bb5bb7c esp32: Deactivate wakeup trigger after first wakeup
The files updated according to code review discussions.
In the sleep_modes.c removed immidiate disable of ULP  mode and leave just trigger deactivation.
The esp_sleep.h is updated to have the same defines for source as esp_sleep_wakeup_cause_t.
Updated documentation in sleep_modes.rst file to include cross references.
Some minor changes in test_sleep.c unit test.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-20 12:23:32 +05:00
Jiang Jiang Jian
45eb556ddf Merge branch 'bugfix/wpa2_assert_when_use_sha256_signature' into 'master'
bugfix of wpa2 assert when use sha256 do signature

See merge request idf/esp-idf!2089
2018-03-20 15:19:55 +08:00
Deng Xin
bc97b0f380 bugfix of wpa2 assert when use sha256 do signature
The order of wpa2_crypto_funcs_t structure mismatch between IDF and wifi libray

close github issue https://github.com/espressif/esp-idf/issues/1297
2018-03-20 11:08:20 +08:00
Liu Zhi Fu
078cd81f10 esp32: Fix wifi stop never return issue
Fix esp_wifi_stop() never return issue
2018-03-19 21:16:29 +08:00
michael
c2a68ae0d3 test(wifi): add test for wifi stop and deinit. 2018-03-19 08:23:52 +00:00
Alex Lisitsyn
ce09cfd99b esp32: Deactivate wakeup trigger after first wakeup
Added function esp_sleep_disable_wakeup_source() to deactivate wakeup trigger for selected source.
Updated documentation for this function in sleep_modes.rst file.
Updated unit test to check this functionality for light sleep.
The test_sleep.c unit test is updated to add reliability for unit testing.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-16 18:49:24 +05:00
Alex Lisitsyn
2d90da0817 esp32: Deactivate wakeup trigger after first wakeup
The timer wakeup function once activated cannot be disabled later using existing api. If user wants to use different wakeup sources after first sleep but it does not work. This change disables timer wakeup trigger in configuration that will be set into appropriate RTC registers in esp_light_sleep_start() function.

Added function esp_sleep_disable_wakeup_source() to deactivate wakeup trigger for selected source.
Updated documentation for this function in sleep_modes.rst file to pass make html.
Updated unit test to check this functionality for light sleep.
The test_sleep.c unit test is updated to add reliability for auto unit testing.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-16 18:22:02 +05:00
Liu Zhi Fu
8f61716647 esp32: Fix esp_wifi_stop never returns issue
esp_wifi_stop may never return when run esp_wifi_start/stop repeatly.
2018-03-15 11:25:13 +08:00
Ivan Grokhotkov
36098f3cac Merge branch 'bugfix/make_MEMMAP_SMP_config_dependent' into 'master'
bugfix/remove MEMMAP_SMP config

See merge request idf/esp-idf!1988
2018-03-14 13:02:55 +08:00
Roland Dobai
f891eac827 ESP32: Optionally disable lookup-tables for esp_err_to_name 2018-03-13 14:26:54 +01:00
Deng Xin
768d6e09ab Bugfix of wpa2 task assert when suddenly disconnect 2018-03-12 21:41:24 +08:00
Tian Hao
127d213b29 component/esp32: fix esp_timer bug
1. fix the bug that cause esp_timer_get_time is not accuracy(the max margin may be 106s).
2. fix the bug that causes esp timer come too early.
2018-02-28 10:49:45 +08:00
Darian Leung
33aee51727 bugfix/remove MEMMAP_SMP config
This commit removes the MEMMAP_SMP config option.
Dependencies on this config will now depend on !FREERTOS_UNICORE
2018-02-27 17:56:44 +08:00
Ivan Grokhotkov
d1559732b0 Merge branch 'feature/ignore_no_psram' into 'master'
Add option to continue running (with less ram) if psram is enabled but not detected

See merge request idf/esp-idf!1911
2018-02-26 20:33:28 +08:00
Ivan Grokhotkov
a9ae4e2696 Merge branch 'bugfix/config_minor_missing_deps' into 'master'
Kconfig: esp32/freertos: add some missing dependencies

See merge request idf/esp-idf!1966
2018-02-26 05:57:27 +08:00
Mahavir Jain
bf31afd2c3 Kconfig: esp32/freertos: add some missing dependencies
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-02-21 12:31:10 +05:30
Daniël van Eeden
bd0b3a7d6b Fix esp_sleep_wakeup_cause_t docs. Merges https://github.com/espressif/esp-idf/pull/1634
value and description didn't match
2018-02-20 20:22:14 +01:00
Roland Dobai
4322e31c98 Make it easier to look up error messages
tools/gen_esp_err_to_name.py generates
components/esp32/esp_err_to_name.c for lookup of the error codes from
all of the IDF project and easily identify all codes in one place
2018-02-15 14:19:03 +01:00
Jeroen Domburg
dc864c4108 Add option to continue running (with less ram) if psram is enabled but not detected 2018-02-12 13:44:11 +08:00
Ivan Grokhotkov
a5f9563ef7 esp32: increase default event task stack size by 256 bytes
At debug log level, default event task stack size was not sufficient,
the stack was overflown by 232 bytes when WiFi connection happened.
2018-02-11 13:06:01 +08:00
Ivan Grokhotkov
417ef19084 Merge branch 'feature/tls_support' into 'master'
FreeRTOS TLS support

See merge request idf/esp-idf!1902
2018-02-09 12:34:20 +08:00
Alexey Gerenkov
f8c42369f1 freertos: Adds C11 TLS support 2018-02-07 18:46:57 +03:00
Liu Zhi Fu
5497c5ed9a esp32: fix esp_wifi_deinit causes assert
Update wifi lib to fix esp_wifi_deinit causes system assert issue
2018-02-06 13:01:51 +00:00
Ivan Grokhotkov
8173d42581 Merge branch 'feature/partition_table_md5' into 'master'
Partition table md5 check

See merge request idf/esp-idf!1891
2018-02-05 20:58:52 +08:00
Roland Dobai
cf7a4cc650 Protect partition table by MD5 checksum 2018-02-05 11:36:03 +01:00
wangmengyang
a31d07ba25 move rodata segment of libphy.a to dram
1. rodata segment of libphy.a(about 1200B) can be accessed by ISRs, so put it into DRAM
2018-02-02 13:00:11 +08:00
Jiang Jiang Jian
17f01eb718 Merge branch 'feature/wifi_throughput_optimization' into 'master'
lwip/esp32/examples: wifi throughput optimization

See merge request idf/esp-idf!1861
2018-01-31 15:44:43 +08:00
Liu Zhi Fu
2242bf9b37 lwip/esp32/examples: wifi throughput optimizations
1. Put some lwip udp rx/tx relating functions to IRAM
2. Put some wifi rx/tx relating functions to IRAMa
3. Reduce wifi dynamic malloc from 4 to 1 for each ebuf
4. Update iperf example accordingly
5. Update libphy.a to v383
2018-01-30 16:27:49 +08:00
Angus Gratton
1249659931 Merge branch 'bugfix/system_restore_duplicate' into 'master'
esp32: remove duplicate definition of system_restore

See merge request idf/esp-idf!1864
2018-01-29 14:02:02 +08:00
Ivan Grokhotkov
1979235df2 esp32: remove duplicate definition of system_restore
Fixes https://github.com/espressif/esp-idf/issues/1520.
2018-01-28 19:26:37 +08:00
wangmengyang
95af1c22b5 components/phy: add IRAM_ATTR attribute to the two APIs used in phy calibration
1. the two APIs used in phy calibration are called in bluetooth baseband ISR, so locate the them in IRAM
2018-01-26 17:12:59 +08:00
XiaXiaotian
1bc87e972b Added two functions in PHY API for disable interrupts and add rfcal data checking to PHY 2018-01-25 17:58:14 +08:00