Commit graph

662 commits

Author SHA1 Message Date
xiehang
c9e7a04a9e Update wifi lib
1. Add wifi stop check at wifi deinit entry.
2. Add TX packets size check.
3. Reduce wifi bin size.
4. Fix the bug for setting channel when wifi in NULL mode.
5. Place the Vendor Specific element at the end according to the protocol.
6. Coex adjust scheme when bt is in connnected status.
2020-03-10 20:01:39 +08:00
Jiang Jiang Jian
2eb4374a5b Merge branch 'bugfix/coex_schm_rebased_v3.3' into 'release/v3.3'
components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario (Backport v3.3)

See merge request espressif/esp-idf!7410
2020-02-12 17:07:18 +08:00
Xia Xiaotian
a41443184e components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-02-12 16:13:28 +08:00
Hrudaynath Dhabe
46bfd878da Fix wps config for support with gnu++11 as well as c99. 2020-01-31 05:56:00 +00:00
zhangyanjiao
431080faa1 fix the bugs for espnow and bandwidth 2020-01-13 15:10:09 +08:00
ronghulin
78d7e214d6 esp32: fix a WiFi RX bug
Support WiFi/BT MAC register writting when the WiFi/BT common clock is disabled.
2020-01-13 15:09:52 +08:00
Xia Xiaotian
19913cec43 esp_wifi: fix WiFi scan and connect bugs when coexist with Bluetooth
1. Fix WiFi scan leads to poor performance of Bluetooth.
    2. Improve WiFi connect success ratio when coexist with Bluetooth.
    3. Check if WiFi is still connected when CSA or beacon timeout happen.
    4. add coex pre init
2019-12-04 04:19:58 +00:00
Xia Xiaotian
9592346090 Coexist: fix some coexist bugs
1. Fix high beacon and broadcast packets loss ratio of WiFi to make
   MDNS test pass.
2. Improve stability of WiFi performance with a little
   sacrifice of throughput.
3. Improve BLE advertising and connection performance with dynamic
   priority. It sacrifices a little WiFi throughput, but achieves balance
   between WiFi and Bluetooth.
4. fix bug bb reset lock flag to avoid bb reset lock unhandle
5. fix bug wifi reset mac cause task watch dog timeout
6. fix bug wifi reset mac position
2019-10-29 17:18:12 +00:00
liu zhifu
396f477972 esp32: fix some WiFi bugs
Fix following WiFi bugs:
1. Fix the bug that wpa2 enterprise sta can connect open AP
2. Fix TKIP/CCMP PN replay attack detection bug
3. Increase buffer number type from uint8_t to uint16_t to support more than 255 buffers
4. Avoid recalculating PMK if esp_wifi_set_config() is not called
5. Fix the bug that scan done leads to crash because of uint8 overflow
6. Fix 5.5M signal test bug
2019-10-12 10:38:44 +08:00
chenyudong
e943181f72 test: move wifi library check to esp32-wifi-lib ci 2019-09-20 17:50:23 +08:00
xiehang
2dc98f3be8 WiFi: Modify the wifi_country struct in VNC to keep it consistent with IDF.
1. Modfy wifi_country struct
2. Add md5 check esp_wifi_types.h
3. Add md5 check esp_wifi.h
2019-09-20 17:50:19 +08:00
Angus Gratton
21a8a9a170 Merge branch 'bugfix/dis_interrupts_up_to_6_level_for_dport_wa_v3.3' into 'release/v3.3'
esp32: Dis interrupts up to 5 lvl for DPORT (v3.3)

See merge request espressif/esp-idf!5713
2019-09-03 13:34:54 +08:00
chenjianqiang
cf2062f1d7 bugfix(flash): add flash config in app startup
We fixed some flash bugs in bootloader, but for the users used the old
vrsion bootloader, they can not fix these bugs via OTA, the solution is
add these updates in app startup.

These updates include:
1. SPI flash gpio matrix and drive strength configuration
2. SPI flash clock configuration
3. SPI flash read dummy configuration
4. SPI flash cs timing configuration
5. Update flash id of g_rom_flashchip
2019-08-27 21:04:36 +08:00
Konstantin Kondrashov
2e9904556f esp32: Dis interrupts up to 5 lvl for DPORT
Disable interrupts for both DPORT workarounds up to 5 lvl.

Closes: https://esp32.com/viewtopic.php?f=2&t=10981&sid=d125cec233070ed4d2c5410bf5d3d74a
Closes: IDF-728
2019-08-21 09:48:16 +00:00
suda-morris
b482ba117d efuse: update the scheme of getting chip revision 2019-08-13 15:49:01 +08:00
Angus Gratton
088439c634 aes: Add fault injection checks when writing key to hardware
Vulnerability reported by LimitedResults under Espressif Bug Bounty Program.
2019-08-11 13:18:23 +10:00
Jiang Jiang Jian
db38c37cf7 Merge branch 'mesh/bugfix_0628_v3.3' into 'release/v3.3'
mesh: bugfix (backport 3.3)

See merge request espressif/esp-idf!5438
2019-07-05 22:33:24 +08:00
qiyuexia
f4ee20165e mesh: bugfix
1. resend eb which are pending in g_ic.tx_buf due to channel switch.
2. add lock for mgmg/xon/bcast to protect send from user flush.
3. softap: add check if secondary offset is correct when start softap.
4. softap: in inactive timer handler, add check if child bss is removed to avoid removing it again.
5. disable A-MPDU for non-root.
6. fix reusing a freed eb.
7. fix when node becomes root, it does not record assoc value to nvs.
8. discard unnecessary forwarded group packets.
9. fix toDS state is not updated in time.
10. fix s_sta_cnx_times is not cleared when deinit causes root sends ADD annoucement.
11. root: increase beacon timeout time from 6 seconds to 15 seconds to delay initiation of reconnection.
12. add esp_mesh_get_tsf_time to return TSF time.
13. send the whole routing table multi-times.
14. clear candidate settings if not receive candidate beacon within 8 seconds.
2019-07-03 14:35:57 +08:00
chenjianqiang
a6f990ffb9 bugfix(flash): improve flash dio read timing
When flash work in DIO Mode, in order to ensure the fast read mode of flash
is a fixed value, we merged the mode bits into address part, and the fast
read mode value is 0 (the default value).
2019-07-02 14:25:27 +08:00
xiehang
cf3647fe40 wps: add overlap event (backport v3.3)
modify some header files to be consistent with vnc
2019-06-06 13:33:03 +08:00
liu zhifu
620bba3a66 esp32: fix some WiFi bugs
Fix following WiFi bugs:
1. Make smartconfig thread-safe
2. Fix WiFi stop/deinit memory leak
3. Refactor for WiFi init/deinit/ioctl etc
4. Add declaration for esp_wifi_internal_ioctl()
5. Fix the bug that WiFi stop leads to task watchdog
2019-05-22 22:22:21 +08:00
maojianxin
ce3d20dcd2 Fix external start fail 2019-04-02 12:54:08 +11:00
zhangyanjiao
6d2faf4172 wifi: modify wifi reason code 2019-04-01 11:29:29 +08:00
Angus Gratton
8120efc6ed Merge branch 'bugfix/modify_dhcpserver_and_tcpip_adapter' into 'master'
modify the behavior for dhcpserver and tcpip_adapter

Closes IDFGH-557 and IDFGH-563

See merge request idf/esp-idf!4453
2019-03-13 12:54:55 +08:00
zhangyanjiao
27cc0d1f91 modify the behavior for dhcpserver and tcpip_adapter:
1. dhcp_server: suppress send_offer debug output
2. tcpip_adapter: zero-initialize system_event_t structures
3. tcpip_adapter: pass client IP address along with SYSTEM_EVENT_AP_STAIPASSIGNED

Closes https://github.com/espressif/esp-idf/issues/2924
Closes https://github.com/espressif/esp-idf/issues/2949
2019-03-11 12:11:05 +08:00
aleks
13e1c0b32f esp32: coredump header (fix linker.lf)
remove duplicated include from components/esp32/incliude/esp_core_dump.h
espcoredump/incliude/esp_core_dump.h:
fix signature of the functions esp_core_dump_to_uart() and esp_core_dump_to_uart();
add espcoredump into COMPONENT_PRIV_REQUIRES list
fix linker.lf file
2019-03-08 09:49:37 +00:00
XiaXiaotian
b9b401ee39 Decouple WiFi and BT with coexist to reduce bin size
1. Do not link WiFi code when only BT or BLE is used and WiFi is not
used.

2. Do not link coexist code when CONFIG_SW_COEXIST_ENABLE is disabled.
2019-03-05 10:38:14 +08:00
Jiang Jiang Jian
ebdcbe8c60 Merge branch 'doc/crc_apis_usage' into 'master'
Add CRC APIs usage

See merge request idf/esp-idf!4351
2019-03-01 10:03:03 +08:00
zhangyanjiao
4ea4d4744c wifi:
1. make menuconfig can set the WiFi mgmt short buffer num
2. fix several scan bugs
2019-02-27 18:31:32 +08:00
jack
299e4ca716 Add CRC APIs usage 2019-02-26 18:12:14 +08:00
Konstantin Kondrashov
e916cf52a3 bootloader: Add support of anti-rollback
Added:
* set a secure version in app/bootloader.
* description anti-rollback to ota part
* emulate the secure_version write and read operations
* efuse_em partition.
* a description about a rollback for native_ota_example.

Closes: TW26335
2019-02-14 18:51:43 +08:00
Jiang Jiang Jian
2dadc7d549 Merge branch 'bugfix/sha_ownership' into 'master'
hwcrypto sha: Allow SHA contexts to be shared between tasks

See merge request idf/esp-idf!4010
2019-01-24 14:07:23 +08:00
Angus Gratton
f141b29328 hwcrypto sha: Use spinlocks instead of semaphores for small state changes
Significant performance improvement and smaller RAM footprint.
2019-01-23 04:59:44 +00:00
XiaXiaotian
f3b72ef6aa esp32: fix invalid channel state information(CSI) data index
Due to a hardware limitation in ESP32, the first four bytes of some
    CSI data is invalid, not the last four bytes.

    Correct a mistake of CSI sub-carrier index in documentation.
2019-01-22 20:11:05 +08:00
Jiang Jiang Jian
83447cae90 Merge branch 'mesh/cs_root_conflict' into 'master'
detect and fix root conflicts when router BSSID is not set

See merge request idf/esp-idf!3869
2019-01-16 21:16:56 +08:00
Wang Jia Lin
a62cbfec9a Merge branch 'bugfix/fix_psram_eid' into 'master'
bugfix(psram): fix psram size acquisition method, support esp32-pico chips

See merge request idf/esp-idf!3750
2019-01-15 17:44:51 +08:00
qiyuexia
a05fdd9c10 mesh: update libs
1. detect and fix root conflicts when router BSSID is not set.
2. when root can not connect to the router due to NO_MORE_STAS(reason code:5), root will stop re-connection and perform MESH_NWK_LOOK_FOR_NETWORK.
3. wifi: fix the disconnection caused by receiving a deauth frame from non-parent node during scanning.
4. fix routing table redundant issue.
5. modify the max routes limitation from 300 to 1000.
6. wifi: fix ap does not deauth sta which has not completed the 4-way handshake.
2019-01-15 14:26:05 +08:00
Angus Gratton
4a42827c4a esp32: esp_attr.h should include sdkconfig.h
Reported on forum https://esp32.com/viewtopic.php?f=13&t=8669#p36395
2019-01-02 17:04:53 +11:00
qiyueixa
e3833999ea mesh: update libs
1. when no parent is found, send probe request via broadcast.
2. fix memory leak caused by the remove announcement being sent is not released when esp_mesh_stop() is called.
3. fix modify IE encrypt after mesh is started.
4. ignore esp_mesh_connect() if mesh automatic reconnection is enabled.
5. fix reason is cleared before vote is done.
2018-12-26 16:10:55 +08:00
Angus Gratton
d453cce1b3 Merge branch 'bugfix/individual_custom_sections' into 'master'
linker: When using section type attributes, create unique sections

See merge request idf/esp-idf!3920
2018-12-19 15:18:26 +08:00
Angus Gratton
ad200227d2 Merge branch 'feature/add_rollback_flags' into 'master'
bootloader/app_update: Add a support of an app rollback.

See merge request idf/esp-idf!3547
2018-12-19 14:28:11 +08:00
Angus Gratton
769bd4a4af linker: When using section type attributes, create unique sections
* Prevents section type conflict errors if (say) const & non-const data
  is put into the same section (ie with DRAM_ATTR)

* Allows linker --gc-sections to remove unused custom sections
2018-12-19 04:42:04 +00:00
wangmengyang
59f34461d7 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-11 16:49:01 +08:00
Konstantin Kondrashov
dde1fd9b94 bootloader: Add support flags for rollback app
Added
* Set actual ota_seq if both ota are init or incorrect.
* Description of rollback
* UT tests

Closes TW15459
2018-12-11 11:54:21 +08:00
Jiang Jiang Jian
e07c5a22f2 Merge branch 'doc/RF_calibration' into 'master'
doc: add documentation for RF calibration

See merge request idf/esp-idf!3828
2018-11-30 21:50:29 +08:00
Xia Xiaotian
59761b0fcb doc: add documentation for RF calibration
Add an API to erase phy namespace of NVS
2018-11-30 16:26:56 +08:00
zhangyanjiao
e621e0af8b wifi: add code for setting wifi log level and module 2018-11-30 15:24:22 +08:00
chenjianqiang
a0beff99d2 bugfix(psram): fix psram size acquisition method
1. Use BIT[7:5] of EID to determine psram size
2. Add ID support for 16Mbit psram
3. Remove module reset on SPI1
4. Confirmed with the vendor that only the old 32Mbit psram need special clock timing. For other psram chips, we should use standard QPI mode.
2018-11-28 17:05:37 +08:00
qiyuexia
1692896e5e mesh: add channel switch function
1. add network channel switch function.
   - users can obtain the new channel through the event MESH_EVENT_CHANNEL_SWITCH.
   - the entire network will be moved to the same channel as the router without user intervention.
   - if no router is in the network, users can call esp_mesh_switch_channel() on the root side to
     move the entire network to their desired channel.
2. support not configuring the network channel.
3. support not configuring the router BSSID even if the router is hidden.
4. add allow_channel_switch to mesh configuration.
   - if the channel is not specified, this value will be ignored.
   - if the channel is specified and this value is set, when "fail" (mesh_attempts_t) times of parent selection
     or look for networks are reached, device will change to perform a full channel scan for networks that could join.
   - if the channel is specified and this value is set to 0, when a root is not elected, channel switch is not allowed.
     but when a root appears, the root performs a full channel scan during the process of connecting to the router,
     so even allow_channel_switch is set to 0, the root may still switch channel and eventually the entire network
    changes channel.
5. add allow_router_switch to mesh router configuration.
   - if the BSSID of router is not specified, this value will be ignored.
   - if the BSSID of router is specified and this value is set, when the router of this specified BSSID fails to be found
     after "fail" (mesh_attempts_t) times, the entire network is allowed to switch to another router with the same SSID.
6. modify the root to perform a full channel scan when esp_wifi_connect().
7. support handling beacon without DS Paramter Set.
2018-11-27 23:36:01 +08:00
qiyueixa
6c3b5ae5a1 mesh: bugfix
1. fix failture of mesh stop caused by block-sending.
2. fix when FIXED_ROOT is set, 2nd layer devices can not receive mesh event ESP_ERR_MESH_NO_PARENT_FOUND.
3. fix when FIXED_ROOT is set and the root turns off mesh function, 2nd layer devices do not look for new parents.
4. add APIs esp_mesh_disconnect() and esp_mesh_connect().
5. disconnect from parent/router when the DSSS channel in received beacon is different from the home channel.
6. remove nvs task to release 3k bytes memory.
2018-11-21 19:13:41 +08:00