Commit graph

12098 commits

Author SHA1 Message Date
Jiang Jiang Jian
c96ce01d87 Merge branch 'bugfix/supplicant_general_fixes_41' into 'release/v4.1'
wpa_supplicant: Fix some memleaks and invalid memory access (backport v4.1)

See merge request espressif/esp-idf!8555
2020-05-12 20:28:45 +08:00
Mahavir Jain
97f72da56e Merge branch 'bugfix/pthread_tcb_cleanup_wrapper_v4.1' into 'release/v4.1'
Fix linking for vPortCleanUpTCB wrapper (v4.1)

See merge request espressif/esp-idf!8701
2020-05-12 14:18:13 +08:00
Shubham Kulkarni
3e93b8fed9 pthread: Use INTERFACE in target_link_libraries for vPortCleanUpTCB wrapper 2020-05-12 10:35:27 +05:30
lly
295a9eea82 ble_mesh: Fix not update prov addr in fast prov
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
2020-05-11 15:42:58 +08:00
lly
06d445759a ble_mesh: net_key_status only pull one key idx [Zephyr]
Fixes bug where the config client's net_key_status handler would attempt
to pull two key indexes from a message which only holds one.
2020-05-11 15:42:57 +08:00
lly
b1efdd5eb1 ble_mesh: Update client message timeout calculation
Since the behavior of sending segmented messages has been
changed properly, the calculation of timeout value which
will be used when sending an acknowledged message by a
client model also needs to be updated.
2020-05-11 15:42:57 +08:00
lly
42ccb7277f ble_mesh: Add lock for segmented msg operations
Add mutex to protect some variables of the mesh segmented
messages.
Currently the timeout handler of mesh will be executed in
the btc task, while the received mesh messages will be
handled in the btu task. In case some variables are set to
NULL when handled in the btu task, meanwhile these variables
are also accessed in the timeout handler, so we add mutex to
protect these variables and related operations.
2020-05-11 15:42:57 +08:00
lly
cffbc32253 ble_mesh: Fix dereferencing pointer before checking for NULL [Zephyr]
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
2020-05-11 15:42:56 +08:00
lly
8f5564af84 ble_mesh: Optimize some mesh log output 2020-05-11 15:42:56 +08:00
lly
6a6bac2c62 ble_mesh: Fix restore when revoke keys [Zephyr]
Store keys (NetKey and AppKey) again after revoking.
2020-05-11 15:42:55 +08:00
lly
526f253b2e ble_mesh: Spit mesh_util.h into different header files
Split mesh_util.h into mesh_byteorder.h, mesh_compiler.h,
mesh_ffs.h and mesh_util.h based on the classification of
Zephyr, which will make further porting more clear.
2020-05-11 15:42:55 +08:00
lly
2f40c4449f ble_mesh: Split mesh os related into a separate file 2020-05-11 15:42:54 +08:00
lly
8ab29292ab ble_mesh: Split mesh mutex into a separate file 2020-05-11 15:42:54 +08:00
lly
9af8947e55 ble_mesh: Rename mesh_kernel.* to mesh_timer.* 2020-05-11 15:42:53 +08:00
lly
800cb0fff8 ble_mesh: Add and use transport macro definitions [Zephyr] 2020-05-11 15:42:53 +08:00
lly
362e8e0a1f ble_mesh: Friend SeqAuth cleanup [Zephyr]
The Friend queue uses the message SeqAuth to determine whether the
message is already in the queue. To facilitate this, the SeqAuth is
passed around as a pointer throughout the transport modules. In the
bt_mesh_ctl_send functions, this parameter is also exposed in the API,
but the internal usage is inconsistent and buggy. Also, no one actually
uses this parameter.

- Removes seq_auth param from bt_mesh_ctl_send, instead passing NULL
  directly to the friend module, to enforce its addition to the queue.
- Makes the seq_auth pointer const throughout the friend module.
2020-05-11 15:42:52 +08:00
lly
de648753b0 ble_mesh: Rework msg_cache [Zephyr]
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.

Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.

Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.

Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
2020-05-11 15:42:52 +08:00
lly
aed5dc63b7 ble_mesh: Segmented TX to groups [Zephyr]
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
  unacked packet is sent every retransmit, the retransmit counters would
  be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
  last segment by adding a seg_pending counter. This is essentially the
  same as the old behavior, except that the old behavior might retrigger
  the sending before all segments are finished if the advertising is
  slow.
- Allows the group transmits to stop as soon as all retransmits have
  been exhausted, instead of timing out waiting for acks that won't
  come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
  erronous.
2020-05-11 15:42:51 +08:00
lly
21c5be311c ble_mesh: Add comment explaining use of byte order [Zephyr]
Add comment that explains why a different byte order is used for the
3-byte opcode on the CID part of the opcode.
2020-05-11 15:42:51 +08:00
lly
0a41241e10 ble_mesh: Use 24-bit functions [Zephyr]
Use 24-bit functions for byteorder and net_buf in order to make the
byteorder used more readable.
2020-05-11 15:42:50 +08:00
lly
e3472c1c99 ble_mesh: Optimize net_buf_simple routines [Zephyr]
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
2020-05-11 15:42:50 +08:00
lly
175109d196 ble_mesh: Add PRIu64 & PRIx64 in mesh_types.h 2020-05-11 15:42:49 +08:00
lly
61d376109c ble_mesh: Add push functions for supported bit-variants [Zephyr]
Add push functions for bit-widths supported by add and pull functions.
2020-05-11 15:42:49 +08:00
lly
fd4b6fd47e ble_mesh: Add support for 64 bit data type [Zephyr]
This enables pulling and pushing values in 64 bit format.
2020-05-11 15:42:48 +08:00
lly
b348b55d1e ble_mesh: Add support for 48 bit data type [Zephyr]
This enables pulling and pushing values in 48 bit format.
2020-05-11 15:42:48 +08:00
lly
82a5b05948 ble_mesh: Add 48 bit variants [Zephyr]
This adds sys_*_*48 functions that operation on a 48 bits values.
2020-05-11 15:42:46 +08:00
lly
95718d9ef9 ble_mesh: Add support for 24 bit data type [Zephyr]
This enables pulling and pushing values in 24 bit format.
2020-05-11 15:42:46 +08:00
lly
33c0ddce40 ble_mesh: Add 24 bit variants [Zephyr]
This adds sys_*_*24 functions that operation on a 24 bits values.
2020-05-11 15:42:45 +08:00
lly
bf4b513e83 ble_mesh: Group resends in proxy nodes [Zephyr]
Resend transport segments for groups on the advertiser interface, even
if a connected proxy node holds the group.
2020-05-11 15:42:45 +08:00
lly
91fff8c897 ble_mesh: Typo in condition in comp_add_elem of cfg_srv [Zephyr]
Vendor model IDs take up four (not two) bytes in the composition
2020-05-11 15:42:45 +08:00
lly
7ea60199a6 ble_mesh: GATT Proxy Spec 1.0.1 changes [Zephyr]
Backport of https://github.com/apache/mynewt-nimble/pull/724

Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.

Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()

---

According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."

Moreover some notes have been removed from the spec compared to
version 1.0:

Mesh Profile Spec 1.0, Section 4.2.11:

"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."

"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."

Mesh Profile Spec 1.0, Section 4.2.11.1:

"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
2020-05-11 15:42:44 +08:00
lly
2b84b673bf ble_mesh: Support reliable sending when publishing [Zephyr]
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
2020-05-11 15:42:44 +08:00
lly
c2e24e306f ble_mesh: Check device uuid when init provisioning 2020-05-11 15:42:43 +08:00
lly
a85459e245 ble_mesh: Fix provisioning buffer initialization [Zephyr]
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
2020-05-11 15:42:43 +08:00
lly
a0434371b0 ble_mesh: Skip publish if update fails [Zephyr]
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.

Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
2020-05-11 15:42:42 +08:00
lly
1717c2face ble_mesh: Enable Segmented Control Messages [Zephyr]
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
2020-05-11 15:42:42 +08:00
Renz Bagaporo
ee0f8adaed ldgen: determinism in mapping rule order
This MR imposes some determinism in the mapping rule order in the output
file. For each section, the archives are arranged alphabetically
(ascending), and the mapping rules in each archive are arranged by
increasing specificity then alphabetically (ascending). The default
rules remain the very first rule for each section.
2020-05-08 20:48:43 +08:00
Zhang Jun Hao
949e7c6f85 fix(wpa_supplicant): fix memleak in wpa3 feature 2020-05-08 16:30:16 +08:00
Michael (XIAO Xufeng)
f14cdd5d3a Merge branch 'bugfix/timer_group_intr_enable_v4.1' into 'release/v4.1'
fix timer group intr enable (backport v4.1)

See merge request espressif/esp-idf!8529
2020-05-08 14:57:20 +08:00
Mahavir Jain
15daee9a0f Merge branch 'bugfix/wifi_prov_not_stopping_v4.1' into 'release/v4.1'
wifi_provisioning: Catch the Wi-Fi events even after Connection errors (v4.1)

See merge request espressif/esp-idf!8607
2020-05-06 22:28:06 +08:00
kapil.gupta
de85de7c51 wpa_supplicant: Fix some memleaks and invalid memory access
Add changes to fix issues reported in clang analyzer
2020-05-06 11:05:30 +00:00
Island
27ae9d3e2c Merge branch 'bugfix/ble_mesh_provisioner_check_key_v4.1' into 'release/v4.1'
ble_mesh: Check if appkey exist before deleting it (v4.1)

See merge request espressif/esp-idf!8621
2020-05-06 18:17:02 +08:00
Island
7db21de3b3 Merge branch 'bugfix/ble_mesh_compile_error_o2_v4.1' into 'release/v4.1'
ble_mesh: Fix compile error when -O2 (performance) is chosen (v4.1)

See merge request espressif/esp-idf!8616
2020-05-06 18:15:53 +08:00
Island
cec0f25484 Merge branch 'bugfix/ble_mesh_node_reset_erase_v4.1' into 'release/v4.1'
ble_mesh: Fix node not erase info completely (v4.1)

See merge request espressif/esp-idf!8622
2020-05-06 18:14:41 +08:00
David Čermák
f232b07e4e Merge branch 'feature/config_mqtt_task_prio_v4.1' into 'release/v4.1'
esp_mqtt:  configure task priority, esp_mqtt_abort_connection race condition, clenaup logs and docs (v4.1)

See merge request espressif/esp-idf!8472
2020-05-06 16:23:19 +08:00
lly
78b13034ef ble_mesh: Fix node not erase info completely
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
2020-05-06 11:43:43 +08:00
lly
099bf88b2e ble_mesh: Check if appkey exist before deleting it 2020-05-06 11:40:20 +08:00
lly
466d450b4b ble_mesh: Add length check for some mesh operations 2020-05-06 11:26:33 +08:00
lly
a742255f8e ble_mesh: Fix compile error when -O2 (performance) is chosen 2020-05-06 11:26:25 +08:00
Island
dd89b2dc0d Merge branch 'bugfix/ble_mesh_rpl_list_size_v4.1' into 'release/v4.1'
ble_mesh: Associate replay protection list size with nodes count (v4.1)

See merge request espressif/esp-idf!8493
2020-05-06 11:15:21 +08:00