Commit graph

20 commits

Author SHA1 Message Date
Ivan Grokhotkov
6f504deed0 nvs: run all test by default, exclude long tests by tag
Reduces the chance of new tests being skipped in CI
2018-04-19 15:08:08 +08:00
Ivan Grokhotkov
f8cb95d0b8 nvs: print progress in nvs API tests, reduce number of iterations 2018-04-19 15:08:08 +08:00
Ivan Grokhotkov
17ab60d642 Merge branch 'bugfix/nvs_failed_crc_assert' into 'master'
nvs: don’t expect items with bad CRC to be in cache

See merge request idf/esp-idf!2239
2018-04-18 11:01:21 +08:00
Sagar Bijwe
9a3c4b7134 nvs: Fix recovery after power-off during erase operation
Current code for recovery after power-off do not clean-up partially
erased items for FULL pages. If the erasure was part of modification
operation, this gets luckily cleaned-up because of duplicate detection
logic. For erase-only operation, the problem still exists. This patch
adds the recovery for FULL pages also.

Closes TW<20284>
2018-04-17 12:24:21 +05:30
Ivan Grokhotkov
2c3644a09f nvs: don’t expect items with bad CRC to be in cache
When erasing a variable length item with an incorrect CRC32, the span
value of the item can not be trusted, so the item will be erased with
span = 1. Subsequent entries represent the data of the variable
length item, and these will be treated as separate items. For each
entry CRC32 is checked, the check most likely fails (because the
entry contains arbitrary data, and not a proper NVS item), and the
entry is erased. Erase function assumed that every item should be
present in cache, but it is not the case for the entries which are
just parts of item’s payload. This change allows for the item to be
not found in the hashlist, if the CRC32 check fails.
2018-04-16 09:36:17 +00:00
Ivan Grokhotkov
fa3bd16d75 nvs: deinit NVS in nvs_stats unit test
This fixes the failure when this test runs after another test which
leaves NVS initialized.
2018-04-16 12:50:57 +08:00
Ivan Grokhotkov
d0d314d8f8 Merge branch 'bugfix/nvs_page_selection' into 'master'
nvs: Fix page selection algo to consider free entry counts as well

See merge request idf/esp-idf!2240
2018-04-16 10:32:01 +08:00
Sagar Bijwe
7e79471ece nvs: Fix page selection algo to consider free entry counts as well
Current page selection algorithm selects a page for compaction based on just erased counts
and gives up when it does not find any page with erased count greater than 0. This is
problematic since the current allocation procedure skips the active page if there is not
enough room for the item in that page leaving free chunks on the pages. This change modifies
the algorithm to consider both erased as well as free counts on the candidate pages.

Closes TW<20297>
2018-04-13 14:49:05 +05:30
konstantin
c93626db3f nvs:Add functions for calculating used/free entries
Users needs functions to count the number of free and used entries.

1. `nvs_get_stats()` This function return structure of statistic about the uspace NVS.
(Struct: used_entries, free_entries, total_entries and namespace_count)
2. `nvs_get_used_entry_count()` The second function return amount of entries in the namespace (by handler)
3. Added unit tests.

Closes TW<12282>
2018-04-13 10:34:13 +05:00
Ivan Grokhotkov
9325f2a7a4 nvs_flash: emulator: fix issues in load function, add save function 2017-09-19 10:39:44 +08:00
baohongde
f3be0395d2 component/bt: fix nvs_get_str_or_blob length output error 2017-09-08 12:02:35 +08:00
Ivan Grokhotkov
c0269bc1cd nvs: check CRC of items on full pages
Previously NVS did check CRC values of key-value pairs on the active
page, but the check for full pages was missing. This adds the necessary
check and a test for it.
2017-09-04 14:37:33 +08:00
Amey Inamdar
a2dcf7faa8 nvs: Support for handling multiple NVS partitions
This commit adds support for multiple NVS partitions. This provides application a flexibility to have multiple NVS
partitions such as separate partition with read-only manufacturing data and read-write partition with configuration.
Application can also use this to separate out application's configuration storage from system configuration.

This feature does not change any of the basic property of NVS subsystem. The same-named namespaces across partitions are
considered to be different namespaces. The original NVS API available for the applications remains unchanged. The only
difference is that instead of first NVS partition in the partition table, it now operates on the partition with label
"nvs" (which is default in the IDF provided partition table files). Additional APIs are provided to open a handle and
erase NVS with partition name as a parameter.

A test case is added in the host tests and it is made sure that all the host tests pass. nvs_rw_value app is also tested
with multiple partitions.

Signed-off-by: Amey Inamdar <amey.inamdar@gmail.com>
2017-08-22 13:48:14 +05:30
Ivan Grokhotkov
f045123691 nvs: add test for ESP_ERR_NVS_INVALID_LENGTH 2017-06-27 11:28:37 +08:00
Ivan Grokhotkov
a25a4a0a7c nvs: check value size before writing, document limitations
Writing values longer than half of the page size (with header taken into
account) causes fragmentation issues. Previously it was suggested on the
forum that using long values may cause issues, but this wasn’t checked
in the library itself, and wasn’t documented. This change adds necessary
checks and introduces the new error code.

Documentation is also fixed to reflect the fact that the maximum length
of the key is 15 characters, not 16.
2017-05-31 12:59:24 +08:00
Ivan Grokhotkov
bf01525fc1 nvs: remove search cache at page level
Since read cache was introduced at page level, search cache became
useless in terms of reducing the number of flash read operations.
In addition to that, search cache used an assumption that if pointers to
keys are identical, the keys are also identical, which was proven wrong
by applications which generate key names dynamically.

This change removes CachedFindInfo, and all its uses. This is done at
expense of a small extra number of CPU operations (looking up a value in
the read cache is slightly more expensive) but no extra flash read
operations.

Ref TW12505
Ref https://github.com/espressif/arduino-esp32/issues/365
2017-05-12 12:18:08 +08:00
Ivan Grokhotkov
8f76fe1d7f move Catch framework header into tools directory 2017-04-17 11:01:18 +08:00
Ivan Grokhotkov
5a23ec4dc4 nvs: check that storage has at least one free page
This change adds a check for the free page count to nvs_flash_init.
Under normal operation, NVS keeps at least one free page available,
except for transient states such as freeing up new page. Due to external
factors (such as NVS partition size reduction) this free page could be
lost, making NVS operation impossible. Previously this would cause an
error when performing any nvs_set operation or opening a new namespace.
With this change, an error is returned from nvs_flash_init to indicate
that NVS partition is in such a state.
2017-03-14 22:03:39 +08:00
Angus Gratton
d6f183fbb9 esp_err: Use separate code path for ESP_ERROR_CHECK assertion
* Minimum code size overhead
* Makes function safe to use when flash cache is disabled

Builds on #339 https://github.com/espressif/esp-idf/pull/339
2017-03-03 15:33:23 +11:00
antti
d390449371 add unit tests to esp-idf
rename nvs host test folder, modify .gitlab-ci.yml

remove unit-test-app build

re-format unit test files

remove extra newlines in project.mk

some refactoring for unit test part in project.mk

add build files of unit-test-app in gitignore

add README.md for unit test app

correct headings in README.md

remove files and make minor tweaks in unit test app

update .gitlab-ci.yml to use unit test app

delete unused lines in component_wrapper.mk

delete periph_i2s.h and lcd test

add text floating point in components/esp32/test/Kconfig

correct idf test build paths in .gitlab-ci.yml
2016-11-22 14:45:50 +08:00