Commit graph

146 commits

Author SHA1 Message Date
Xia Xiaotian
9f8efed1eb esp_wifi: fix WiFi scan and connect bugs when coexist with Bluetooth
1. Fix WiFi scan leads to poor performance of Bluetooth.
    2. Improve WiFi connect success ratio when coexist with Bluetooth.
    3. Check if WiFi is still connected when CSA or beacon timeout happen.
    4. add coex pre init
2020-01-20 08:01:59 +00:00
chenjianqiang
ae39c659d0 esp32: cpu_start: read binary image header via cache
When flash encryption is enabled, reading via cache also decrypts the
data, whereas spi_flash_read does not.
2019-10-15 12:08:04 +08:00
chenjianqiang
3349c99882 bugfix(flash): add flash config in app startup
We fixed some flash bugs in bootloader, but for the users used the old
vrsion bootloader, they can not fix these bugs via OTA, the solution is
add these updates in app startup.

These updates include:
1. SPI flash gpio matrix and drive strength configuration
2. SPI flash clock configuration
3. SPI flash read dummy configuration
4. SPI flash cs timing configuration
5. Update flash id of g_rom_flashchip
2019-10-15 12:08:04 +08:00
Angus Gratton
ec331b3979 flash encryption: Add config option to disable any plaintext reflashes
Enabled by default when Secure Boot is on, so Flash Encryption protection
is always available in case of a Secure Boot bypass.
2019-09-05 18:54:29 +10:00
chenjianqiang
9edc9674bc bugfix(flash): improve spi cs timing settings for flash
cs setup time is recomemded to be 1.5T, and cs hold time is recommended to be 2.5T.
(cs_setup = 1, cs_setup_time = 0; cs_hold = 1, cs_hold_time = 1)
2019-07-15 14:44:28 +08:00
XiaXiaotian
5059c7fac3 Decouple WiFi and BT with coexist to reduce bin size
1. Do not link WiFi code when only BT or BLE is used and WiFi is not
used.

2. Do not link coexist code when CONFIG_SW_COEXIST_ENABLE is disabled.
2019-04-17 16:59:24 +08:00
Mahavir Jain
1fcef31195 cpu_start: fix warnings with CONFIG_PM_DFS_INIT_AUTO option
Closes https://github.com/espressif/esp-idf/issues/3297
2019-04-16 11:21:26 +05:30
Ivan Grokhotkov
42b6c4953d bootloader, esp32: add workaround for Tensilica erratum 572
If zero-overhead loop buffer is enabled, under certain rare conditions
when executing a zero-overhead loop, the CPU may attempt to execute an invalid instruction. Work around by disabling the buffer.
2019-01-23 16:23:56 +08:00
Jiang Jiang Jian
97e3542947 Merge branch 'bugfix/release_some_memory_on_single_core_mode' into 'master'
release memory not used in single core mode

See merge request idf/esp-idf!2733
2018-10-30 15:53:31 +08:00
Angus Gratton
31cf117404 Merge branch 'feature/bss_seg_in_external_memory' into 'master'
memory:   support .bss segment can be in psram

See merge request idf/esp-idf!2236
2018-10-10 14:40:21 +08:00
Roland Dobai
d4e572bdb1 esp32: Add macro to check a condition without abort
Closes https://github.com/espressif/esp-idf/issues/2325
2018-10-09 08:57:23 +02:00
TianZhongXing
01308df8a6 doc: update document of external memory 2018-09-26 10:39:57 +08:00
Ivan Grokhotkov
4ff262ecff ipc: initialise automatically, if called from the app 2018-09-25 15:13:47 +08:00
Jack
2efd6859ed release memory not used in single core mode
1. do not start ipc task in single core mode
2. do not use APP cpu cache memory in single core mode
3. relase data used in rom by APP cpu
2018-09-25 15:13:47 +08:00
TianZhongXing
974112378b feature: allow .bss segment in external memory 2018-09-21 16:20:26 +08:00
Ivan Grokhotkov
789855e71b esp32: abort when running on single core chip in dual core mode
Ref. https://esp32.com/viewtopic.php?f=2&t=7307
2018-09-19 15:05:26 +08:00
Konstantin Kondrashov
9c715d7946 bootloader_support: Fix enable rtc_wdt for resolve issue with varying supply
Eliminates the issue with the lock up in the bootloader due to a power drawdown during its operation.

Closes https://github.com/espressif/esp-idf/issues/1814
2018-09-03 05:43:01 +00:00
Angus Gratton
4f227a4ce3 Merge branch 'bugfix/spiram_malloc_reserve_internal_fragments' into 'master'
esp32: Allow SPIRAM_MALLOC_RESERVE_INTERNAL to span multiple regions of memory

See merge request idf/esp-idf!2891
2018-08-16 11:19:39 +08:00
Konstantin Kondrashov
a8e46775c6 soc/rtc_wdt: Add API functions for rtc_wdt
Added functions:
rtc_wdt_protect_off/on
rtc_wdt_set_length_of_reset_signal
rtc_wdt_set_stage
rtc_wdt_set_time
rtc_wdt_feed
rtc_wdt_disable/enable
2018-08-14 17:48:02 +05:00
Angus Gratton
304e9085eb esp32: Allow SPIRAM_MALLOC_RESERVE_INTERNAL to span multiple regions of memory
- Allocate this pool after main_task is running, so it can use startup stack RAM
- Raise the maximum allowed value in KConfig to 256KB
- Based on forum discussions https://esp32.com/viewtopic.php?f=2&t=6550&sid=76cd27bda76c6d0e83d3fcc9ec30c650&start=10#p28253
2018-07-31 15:17:07 +10:00
Alexey Gerenkov
c1b6a37bb1 esp32: Adds GCOV debug stubs support
Adds the following functionality
 - Debug stubs infrastructure
 - Stub for retrieveing GCOV data without user source code modification
2018-05-18 16:16:03 +03:00
Mahavir Jain
441b4a9742 esp32: fix few components with dependency on networking stack
* Move smartconfig to its component directory, it should be possible to override
  this as whole component
* Fix few header includes related to lwIP networking stack

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-04-19 18:28:55 +05:30
Jeroen Domburg
dc864c4108 Add option to continue running (with less ram) if psram is enabled but not detected 2018-02-12 13:44:11 +08:00
Jack
624828ce83 Dump the frame of the other core when interrupt watchdog happens 2018-01-18 23:10:29 +00:00
Angus Gratton
f8580ea98f esp32: Change 192KB runtime static limit workaround to a 176KB link time workaround
Turns out some app memory around 0x3ffdc000 is also used by APP CPU.

This is a workaround until code to remove the 176KB limit is committed.
2017-12-27 11:59:54 +11:00
Alexey Gerenkov
7df96718a2 esp32: Adds C++ exceptions emergency pool size menuconfig option 2017-11-23 06:14:11 +03:00
Darian Leung
9d63e1da4a New Task Watchdog API (Revert of Revert)
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.

- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.

This commit also adds the following features to the task watchdog

- Updated idle hook registration to be compatible with dual core hooks

- Updated dual core hooks to support deregistration for cpu

- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
  esp_task_wdt_reset().  esp_task_wdt_feed() is deprecated

- Idle hooks to reset are now registered/deregistered when the idle tasks are
  added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit

- Updated example
2017-11-02 16:47:51 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
42d51a4224 esp32: initialize PM at startup, add Kconfig options 2017-10-18 14:19:17 +08:00
Ivan Grokhotkov
37e9bc715c esp_clk.h: make public, add getters for RTC time, CPU/APB freq 2017-10-18 14:19:14 +08:00
Angus Gratton
9c7477ef34 cxx: Add KConfig option for C++ exceptions, disable by default
Fixes https://github.com/espressif/esp-idf/issues/1072

(Additional 20KB is still used if C++ exception support is enabled in
menuconfig.)
2017-10-17 15:29:25 +08:00
Ivan Grokhotkov
1da3204a7c spiram: expose function to initialize SPI RAM cache
Some frameworks based on ESP-IDF need to be able to decide whether to
initialize SPI RAM after the application has started. This change splits
out part of esp_spiram_init which manipulate cache MMU into a separate
function. Applications can disable cache, call esp_spiram_init_cache,
re-enable cache, and then call esp_spiram_init.
Disabling and re-enabling the cache can be achieved using functions
provided in esp_spi_flash.h.
2017-10-16 09:15:11 +08:00
Jeroen Domburg
b6a2bd1184 Revert "esp32: New Task Watchdog API"
This reverts commit 616baa239d.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d esp32: New Task Watchdog API
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.

The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().

Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.

Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.

Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.

Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.

Documentation and example have also been updated

gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.

Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Jeroen Domburg
740f8a79f0 Add logic to make external RAM usable with malloc() 2017-09-28 17:17:50 +08:00
Alexey Gerenkov
b09f4acb27 Added proper handling of apptrace and pthread initialization errors 2017-09-14 20:47:43 +02:00
krzychb
a1ebeed303 Changed initialization sequence of application tracing component on APP CPU so it follows completion of initialization of the same component on PRO CPU. Previously, because of missing locking mechanism, both components were printing logs to UART at the same time. As results logs contained only corrupted characters / were not legible at all. Internal tracking: esp-idf/openocd-esp32, Issue 15 2017-09-14 20:47:43 +02:00
Jeroen Domburg
875ae6a134 Add option to allocate external RAM using heap_alloc_caps 2017-09-14 10:47:44 +08:00
Ivan Grokhotkov
5425d8569c Merge branch 'feature/pthread_api' into 'master'
esp32: pthread API

See merge request !1146
2017-09-07 17:49:42 +08:00
Alexey Gerenkov
5094965e98 According to comments 2017-09-06 10:30:23 +08:00
Alexey Gerenkov
0b09c7006d pthread: Initial version of thread API 2017-09-06 10:30:23 +08:00
Angus Gratton
5361c08989 heap: Support adding new heap regions at runtime
To facilitate this, the list of registered heap regions is now a linked list
(allowing entries to be appended at runtime.)
2017-09-05 14:07:02 +10:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Ivan Grokhotkov
f31efb697c newlib: rename esp_setup_time_syscalls to esp_set_time_from_rtc
This function no longer sets up syscalls, and new name reflects its
purpose better.
2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
d4e950d311 Merge branch 'feature/cxx_exceptions' into 'master'
Partial support for C++ exceptions

See merge request !930
2017-09-01 00:27:41 +08:00
Ivan Grokhotkov
547ef83020 Merge branch 'feature/disable_some_perip_clk_when_cpu_start' into 'master'
Disable some peripheral clocks when cpu starts

See merge request !1089
2017-08-30 11:43:38 +08:00
Angus Gratton
1e22bcdfde esp32: Add KConfig option to disable ROM Console fallback on first boot 2017-08-29 14:52:00 +10:00
XiaXiaotian
4776f73ca4 Disable some peripheral clocks when cpu starts
All peripheral clocks are default enabled after chip is powered on.
    When CPU starts, if reset reason is CPU reset, disable those clocks
    that are not enabled before reset. Otherwise, disable all those
    useless clocks.
    These peripheral clocks must be enabled when the peripherals are
    initialized and disabled when they are deinitialized.
2017-08-29 11:18:42 +08:00
Ivan Grokhotkov
857a29872d esp_timer: add high resolution software timer API 2017-08-28 11:35:26 +08:00