Commit graph

1658 commits

Author SHA1 Message Date
lly
e385197c27 ble_mesh: Support reliable sending when publishing [Zephyr]
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
2020-05-11 02:29:18 +00:00
lly
cc549897d5 ble_mesh: Check device uuid when init provisioning 2020-05-11 02:29:18 +00:00
lly
ca3d1637ca ble_mesh: Fix provisioning buffer initialization [Zephyr]
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
2020-05-11 02:29:18 +00:00
lly
6c868a070b ble_mesh: Skip publish if update fails [Zephyr]
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.

Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
2020-05-11 02:29:18 +00:00
lly
aad8908d9c ble_mesh: Enable Segmented Control Messages [Zephyr]
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
2020-05-11 02:29:18 +00:00
Hrishikesh Dhayagude
f67902a5dd Add NimBLE config options in sdkconfig.rename 2020-05-08 12:04:46 +05:30
lly
eaeb465767 ble_mesh: Fix node not erase info completely
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
2020-04-30 06:42:54 +00:00
Island
18950d5780 Merge branch 'bugfix/ble_mesh_provisioner_check_key' into 'master'
ble_mesh: Check if appkey exist before deleting it

See merge request espressif/esp-idf!8332
2020-04-29 21:12:14 +08:00
Jiang Jiang Jian
922a0fa485 Merge branch 'feature/esp-hid-component' into 'master'
ESP-HID Component

See merge request espressif/esp-idf!6908
2020-04-29 17:24:02 +08:00
Hristo Gochkov
25281ef4de Add HID Support to IDF
- Adds HID Host support in Buedroid
- Adds BLE HID Host and Device support
- Adds some general HID utilities and definitions to help integrate with other stacks and native USB
2020-04-29 17:24:01 +08:00
Jiang Jiang Jian
aad3b0e3a2 Merge branch 'bugfix/coex_fix_wifi_performance_when_ble_conn' into 'master'
Coexistence: Add coexist API to enable BLE connection dynamic priority

See merge request espressif/esp-idf!8466
2020-04-28 19:55:31 +08:00
Island
8ef0b66a3b Merge branch 'bugfix/ble_mesh_compile_error_o2' into 'master'
ble_mesh: Fix compile error when -O2 (performance) is chosen

Closes BLEMESH-187

See merge request espressif/esp-idf!8217
2020-04-28 17:29:09 +08:00
baohongde
95f47a2d4d Coexistence: Add coexist API to enable BLE connection dynamic priority 2020-04-28 16:16:27 +08:00
lly
c8a7d20946 ble_mesh: Check if appkey exist before deleting it 2020-04-27 06:27:35 +00:00
lly
fab9b944a4 ble_mesh: Add length check for some mesh operations 2020-04-27 14:24:07 +08:00
lly
c77b7394ed ble_mesh: Fix compile error when -O2 (performance) is chosen 2020-04-27 14:24:07 +08:00
lly
75cf2d7a17 ble_mesh: Fix time scene wrong macro name 2020-04-27 04:17:04 +00:00
Island
feb7f9683c Merge branch 'bugfix/ble_mesh_add_missing_cpp' into 'master'
ble_mesh: Add missing #ifdef __cplusplus

Closes BLEMESH-194

See merge request espressif/esp-idf!8310
2020-04-27 11:47:44 +08:00
Island
1e12673b3c Merge branch 'feat/ble_mesh_sensor_model_example' into 'master'
ble_mesh: Add ble mesh sensor model examples

Closes BLEMESH-190

See merge request espressif/esp-idf!8253
2020-04-27 11:47:06 +08:00
Island
71dc5eb276 Merge branch 'doc/ble_mesh_fixes' into 'master'
doc: Fix some ble mesh description

Closes BLEMESH-189

See merge request espressif/esp-idf!8240
2020-04-27 11:43:48 +08:00
lly
91d70cd128 ble_mesh: Add missing #ifdef __cplusplus 2020-04-26 06:50:35 +00:00
lly
77bb7806a0 ble_mesh: Fix client local parameters not initialized 2020-04-26 06:25:08 +00:00
lly
713581ae87 ble_mesh: Continue node info restore even if failure happens
During BLE Mesh Provisioner initialization, the stack will restore
the nodes information if settings storage is enabled.
Previously when a failure happens (e.g. found the same uuid) during
the restore procedure, the information of the following nodes will
not be restored and error will be directly returned.
But this will introduce some problem with user experience, because
some newly provisioned nodes information will not be restored and
Provisioner will not be able to control those nodes.
So we change the operation here, when a failure happens during the
restore procedure, Provisioner will only ignore the information of
the current node and continue restoring other nodes information.
2020-04-26 06:25:08 +00:00
lly
73804ef4d3 ble_mesh: Remove some redundant functions 2020-04-26 06:25:08 +00:00
lly
f37bc1a515 ble_mesh: Notify unprovisioned device beacon to application layer
With this change, if a Provisioner has provisioned the maximum
number of nodes, it can still report the unprovisioned device
beacon from other nodes to the application layer. And this will
be more reasonable compared with the previous implementation.
Previously when the node array of Provisioner is full, no beacon
from unprovisioned devices will be reported, only some warning
logs will be given.
2020-04-26 06:25:08 +00:00
lly
88b0cd918a ble_mesh: Check if assigned node address is duplicated
Previously only check the node address when it is assigned by the
application layer. Here we also check the address when the address
is allocated internally. And this will be useful when some mesh
internal tests are performed.
2020-04-26 06:25:08 +00:00
lly
7486616382 ble_mesh: Update next alloc address when node info is added 2020-04-26 06:25:08 +00:00
lly
a4d9259912 ble_mesh: Fix Provisioner provisioning deadlock 2020-04-26 06:25:08 +00:00
lly
8d57ebf57d ble_mesh: Remove BLE_MESH_MAX_STORED_NODES option
Previously the BLE_MESH_MAX_STORED_NODES option is added for
internal mesh test, which will be a little confusing for the
users to understand.
Here we remove this option, instead the BLE_MESH_MAX_PROV_NODES
will be used for all the cases. For mesh internal test, when
the test function is called to add some nodes info, the info
will be stored in the array of provisioned nodes directly.
2020-04-26 06:25:08 +00:00
lly
ec2324edbe ble_mesh: Associate replay protection list size with nodes count
The replay protection list of Provisioner should be at least equal
to the number of nodes with the precondition that each node contains
only one element.
The help information of replay protection list is updated, and the
maximum number of nodes for Provisioner is adjusted based on the
replay protection list size.
2020-04-26 06:25:08 +00:00
lly
2f6a4140fa doc: Fix some ble mesh description 2020-04-26 06:22:33 +00:00
lly
e8c5f5dc03 ble_mesh: Add some common macros for sensor model 2020-04-26 06:08:44 +00:00
lly
361dd8b29c ble_mesh: Allow empty sensor series column value 2020-04-26 06:08:44 +00:00
lly
561191d50f ble_mesh: Check if same sensor (settings) property id exists 2020-04-26 06:08:44 +00:00
lly
3862f0e784 ble_mesh: Allow empty sensor settings exist 2020-04-26 06:08:44 +00:00
sushant.chougule
4cd6f09427 components/bt: Fix for HCI desync deadlock issue in BLE controller 2020-04-02 09:54:16 +00:00
Jiang Jiang Jian
20a972d91e Merge branch 'feat/ble_mesh_ble_adv_simultaneously' into 'master'
ble_mesh: Support BLE advertising simultaneously

Closes BLEMESH-125

See merge request espressif/esp-idf!7802
2020-04-02 12:17:42 +08:00
lly
a919e20c1a ble_mesh: Support BLE advertising simultaneously 2020-04-02 01:03:25 +00:00
Prasad Alatkar
be8c847b06 NimBLE: Reset master and slave states on host reset
Closes IDFGH-2743 & IDFGH-2956
2020-04-01 10:09:26 +00:00
xiewenxiang
5d0b6da6a0 component/bt: fix don't dequeue the command queue after process the read_by_type_req 2020-03-31 15:10:01 +08:00
Jiang Jiang Jian
79e92b0e6a Merge branch 'bugfix/ble_mesh_add_test_function' into 'master'
ble_mesh: Add ble mesh white list test function

See merge request espressif/esp-idf!8046
2020-03-27 19:53:54 +08:00
Prasad Alatkar
38fc242914 NimBLE: Fix build failures due to non static declarations in RPA feature
CLoses IDFGH-2891
2020-03-27 14:06:55 +08:00
Prasad Alatkar
2bc28bbd5a NimBLE: Fix NIMBLE_HS_FLOW_CTRL_TX_ON_DISCONNECT in esp_nimble_cfg and bleprph README 2020-03-27 14:05:32 +08:00
Angus Gratton
88bf21b21e Merge branch 'nimble/iram_allocation_strategy' into 'master'
NimBLE: Add support to IRAM allocation strategy

See merge request espressif/esp-idf!8015
2020-03-27 13:54:25 +08:00
lly
45d43f005a ble_mesh: Add ble mesh white list test function
Using the ble mesh white list test functions, a node can choose to
only receive mesh messages from a specific node and relay the
messages for it. Messages from other nodes will be ignored.
2020-03-25 11:30:08 +08:00
Jiang Jiang Jian
c71445a9b9 Merge branch 'bugfix/coex_wakeup_delay_with_dfs' into 'master'
components/coex: Fix wakeup delay with DFS

See merge request espressif/esp-idf!8053
2020-03-25 11:29:18 +08:00
Renz Bagaporo
3d0967a58a test: declare requirements and include dirs private 2020-03-23 10:58:50 +08:00
baohongde
1bcce4e7db components/coex: Fix wakeup delay with DFS 2020-03-20 17:58:05 +08:00
Hrishikesh Dhayagude
67a6fd6f3b NimBLE: Add support to IRAM allocation strategy
Added IRAM allocation provision under nimble_platform_mem_malloc()
2020-03-19 04:47:39 +00:00
lly
ac2ef797fe ble_mesh: Fix ble mesh nimble host deinit 2020-03-16 12:45:58 +08:00
Jiang Jiang Jian
df56535b7a Merge branch 'bugfix/compiler_err_when_performance_optimization_enabled' into 'master'
Bugfix/compiler err when performance optimization enabled

Closes BT-688

See merge request espressif/esp-idf!7958
2020-03-13 19:41:59 +08:00
lly
2ed1724fc2 ble_mesh: Move dev_role to the end of model_pub 2020-03-12 17:48:09 +08:00
lly
5a90ea3048 ble_mesh: Use the right netkey during iv update 2020-03-12 17:43:19 +08:00
lly
37466d957d ble_mesh: Use the right net_idx & app_idx for publish 2020-03-12 17:43:19 +08:00
lly
1795107533 ble_mesh: Check buf->ref before unref the buffer 2020-03-12 17:43:19 +08:00
lly
2b80649a79 ble_mesh: Fix mesh memory use-after-free issue 2020-03-12 17:43:19 +08:00
lly
08080edb1b ble_mesh: Add ble mesh deinit in btc task 2020-03-12 17:43:19 +08:00
lly
9d3ad04667 ble_mesh: Free beacon timer when deinit mesh 2020-03-12 17:43:19 +08:00
lly
13ab2f4015 ble_mesh: Use lock for mesh timer operations 2020-03-12 17:43:19 +08:00
weitianhua
0d2790a429 Remove (x2) variable in BCM_STRNCPY_S and BCM_STRCPY_S when performance optimization enabled 2020-03-12 16:20:58 +08:00
weitianhua
b86f4d4f00 Fix mem_start uninitialized error when compiler optimization performance enabled 2020-03-12 15:07:03 +08:00
gengyuchao
df3f2f4cb0 bugfix/fix_controller_disable_re_enable_crash 2020-03-09 17:40:06 +08:00
Prasad Alatkar
48bd2d74b4 NimBLE: Add Host based privacy (RPA) feature support
- This feature removes dependency on controller to use privacy (RPA)
2020-03-06 11:02:18 +08:00
Jiang Jiang Jian
1e95cf3111 Merge branch 'bugfix/btdm_assert_when_create_connection_cancel' into 'master'
components/bt: Fix assert when create conntion cancel

See merge request espressif/esp-idf!7816
2020-03-05 14:52:36 +08:00
Prasad Alatkar
ee1ab95b98 NimBLE: Fix check for static random address & add MSYS_1 in menuconfig
Closes BT-522 & BT-523
2020-03-05 13:53:04 +08:00
baohongde
d2aa4a1e50 components/bt: Fix assert when create conntion cancel 2020-02-28 20:13:41 +08:00
wangmengyang
3428a1ad0b component/bt: set non-zero initial value for bt sleep clock cycle to avoid div-by-zero error in function "btdm_us_2_lpcycles" when BT modem sleep is not enabled 2020-02-28 11:36:48 +08:00
lly
134f57b8e0 ble_mesh: Calc incomplete timeout based on msg info 2020-02-26 17:42:04 +08:00
lly
087bafe5b9 ble_mesh: Start the timer when starting to send the client message 2020-02-26 17:41:46 +08:00
lly
90f8a54a71 ble_mesh: No timeout for client message to non-unicast address 2020-02-26 17:41:30 +08:00
lly
97eca35805 ble_mesh: Unify client application and lower transport layer timeout 2020-02-26 17:41:11 +08:00
lly
e24645c791 ble_mesh: Allow maximum 377 octets payload 2020-02-26 17:40:46 +08:00
lly
828bfeac88 ble_mesh: Reset transport info when node is removed 2020-02-26 17:40:23 +08:00
lly
48343a8a8f ble_mesh: Provisioner ignores msg from removed node 2020-02-26 17:39:55 +08:00
lly
7cd08b5824 ble_mesh: Miscellaneous modifications
1. Add an API to set Provisioner static oob value
2. Add an API to deinit BLE Mesh stack
3. Add an API to set Provisioner unicast address
4. Add an API to provision devices with fixed address
5. Add an API to store node composition data
6. Add an API to get node with device uuid
7. Add an API to get node with unicast address
8. Add an API to delete node with device uuid
9. Add an API to delete node with unicast address
10. Add an API for Provisioner to update local AppKey
11. Add an API for Provisioner to update local NetKey
12. Support Provisioner persistent functionality
13. Fix Provisioner entering IV Update procedure
14. Fix an issue which may cause client failing to send msg
15. Use bt_mesh.flags to indicate device role
16. Remove several useless macros
17. Callback RSSI of received mesh provisioning packets
18. Modify the Provisioner disable function
19. Change some log level from debug to info
20. Add parameters to Provisioner bind AppKey completion event
21. Fix node ignoring relay messages issue
22. Support using a specific partition for BLE Mesh
23. Fix compile warning when proxy related macros are disabled
24. Clean up BLE Mesh stack included header files
25. NULL can be input if client message needs no parameters
26. Fix compile warning when BT log is disabled
27. Initilize BLE Mesh stack local variables
28. Support using PSRAM for BLE Mesh mutex, queue and task
29. Add a menuconfig option to enable using memory from PSRAM
30. Clean up sdkconfig.defaults of BLE Mesh examples
2020-02-26 17:37:44 +08:00
weitianhua
477e584f7d Bugfix for HFP and some Github issue.
1. Bugfix for AG audio crash (change the return position)
2. Fix the error macro name and error return in hfp_hf demo
3. Fix the annotation error using UTF-8 ' (from Github)
4. Change or remove the log in SCO related code region.
5. Correct error of introduction of a function.
2020-02-25 18:03:54 +08:00
Jiang Jiang Jian
7092613eea Merge branch 'bugfix/btdm_check_EXT_CRYS_state_for_sleep_clk' into 'master'
bugfix/btdm_check_EXT_CRYS_state_for_sleep_clk

Closes BT-582

See merge request espressif/esp-idf!7439
2020-02-21 21:21:54 +08:00
wangmengyang
d6e672ed51 component/bt: fall back to main XTAL as Bluetooth sleep clock when EXT 32K CRYS is configured but not detected 2020-02-20 14:34:28 +08:00
Jiang Jiang Jian
959b0295f3 Merge branch 'bugfix/coex_a2dp_stuck_after_creating_anther_connection' into 'master'
components/coex: Fix a2dp stuck after creating another connection

See merge request espressif/esp-idf!7651
2020-02-20 14:15:22 +08:00
Jiang Jiang Jian
a512d6e15a Merge branch 'bugfix/coex_fix_misspell_in_kconfig' into 'master'
components/coex: Fix misspell in Kconfig

See merge request espressif/esp-idf!7670
2020-02-20 14:15:04 +08:00
baohongde
d11a86076f Fix bugs about role switch
Jitter in FHS
Jitter in first PULL
Receive EDR packet fail after role switch
2020-02-19 20:14:47 +08:00
baohongde
6ca361fd2b components/coex: Fix a2dp stuck after creating anther connection 2020-02-19 07:14:26 +00:00
baohongde
364a9dece0 components/coex: Fix misspell in Kconfig 2020-02-19 11:41:03 +08:00
Jiang Jiang Jian
a06f025e61 Merge branch 'bugfix/coex_watchdog_timeout_with_sleep_enabled' into 'master'
components/coex: Fix watchdog timeout when sleep enabled

See merge request espressif/esp-idf!7419
2020-02-18 20:55:30 +08:00
Jiang Jiang Jian
6d03758ac4 Merge branch 'bugfix/ble_mesh_fix_compile_error_with_cpp' into 'master'
ble_mesh: Fix compile error with c++ files

Closes BMCI-52

See merge request espressif/esp-idf!7579
2020-02-18 20:43:55 +08:00
baohongde
66a01ef490 components/coex: Fix watchdog timeout when sleep enabled
Fix crash without enabling sw coex
2020-02-18 03:35:24 +00:00
blueMoods
6a922ea07c components/bt: change HCI task size back 2020-02-18 03:06:09 +00:00
Jiang Jiang Jian
7d39f435a3 Merge branch 'bugfix/ble_crash_irq_miss' into 'master'
Fix ble crash issue triggered by ble event irq miss(0x20000) (819979b9)

See merge request espressif/esp-idf!7490
2020-02-14 19:53:49 +08:00
Jiang Jiang Jian
928438056d Merge branch 'bugfix/btdm_hfp_ag_crash_in_unknown_at_cmd' into 'master'
components/bt: Fix connection fail and crash when receive unknown AT cmd

Closes BT-565

See merge request espressif/esp-idf!7389
2020-02-14 19:46:46 +08:00
Jiang Jiang Jian
d058be6720 Merge branch 'bugfix/btdm_error_type_in_config_eir_evt' into 'master'
components/bt: Fix error EIR type in config eir event

Closes BT-593

See merge request espressif/esp-idf!7404
2020-02-14 16:38:08 +08:00
sushant.chougule
74c7db3f49 Fix ble crash issue triggered by ble event irq miss(0x20000) (d2a1d18d) 2020-02-13 16:16:21 +05:30
Jiang Jiang Jian
b42fc77e11 Merge branch 'bugfix/ble_mesh_utf_8_comma' into 'master'
ble_mesh: Kconfig included a UTF-8 comma

See merge request espressif/esp-idf!7574
2020-02-13 11:10:43 +08:00
lly
326ccfca88 ble_mesh: Fix compile error with c++ files 2020-02-12 21:24:32 +08:00
Chinmay Chhajed
6d96217204 Future events scheduling error in case of wifi and bluetooth.
After this commit, global interrupts will be disabled before taking
current time for scheduling further bluetooth events. Earlier disabling
interrupts was taking some time because of which WiFi events were
interrupting in current bluetooth scheduling.

Signed-off-by: Chinmay Chhajed <chinmay.chhajed@espressif.com>
2020-02-12 20:04:21 +08:00
lly
bfb27addda ble_mesh: Kconfig included a UTF-8 comma 2020-02-12 18:21:09 +08:00
Jiang Jiang Jian
7f4309d0f1 Merge branch 'feature/esp32_5p0_code_optimize' into 'master'
controller flash code optimize

See merge request espressif/esp-idf!7409
2020-02-11 17:29:08 +08:00
Angus Gratton
11fac8637a docs: Resolve doxygen & Sphinx warnings 2020-02-07 16:37:45 +11:00
Konstantin Kondrashov
739eb05bb9 esp32: add implementation of esp_timer based on TG0 LAC timer
Closes: IDF-979
2020-02-06 14:00:18 +08:00
Prasad Alatkar
bc7ce8e584 Update NimBLE submodule to fix bug in ble_hs_hci_rx_evt 2020-02-04 12:27:47 +05:30
Mahavir Jain
9ee50266cc Merge branch 'nimble/misc_host_flow_ctrl_changes' into 'master'
NimBLE: Misc fixes in NimBLE host flow control and `blecent` example

See merge request espressif/esp-idf!7042
2020-02-03 13:59:45 +08:00
June
4f9c3e977e controller flash code optimize
fix ld file to link 3 bt rom functions
2020-01-31 06:29:46 +00:00
Prasad Alatkar
4047f7e180 NimBLE: Misc changes in host flow control, ble_gap_unpair, ble_hs_hci_rx_evt & example
- Add menuconfig option for NimBLE host flow control
- Include changes in `blecent` example from upstream PR!702
- add ble_hs_lock in ble_gap_unpair Upstream PR!584
- ble_hs_hci_rx_evt, upstream PR!738

Closes https://github.com/espressif/esp-idf/issues/4243
2020-01-31 10:46:55 +05:30
Roland Dobai
5454c268f7 Docs: Omit kconfig configurations not available for the target 2020-01-30 10:30:06 +01:00
Hrishikesh Dhayagude
91c8f324a9 NimBLE: Use dynamic buffers instead of static memory.
The NimBLE host buffers that consume a significant amount of memory are
now allocated dynamically.
The advantage is that, the memory can be reclaimed in cases where BLE
is turned off and not required for the current boot cycle
2020-01-23 00:55:51 +08:00
baohongde
097777ed66 components/bt: Fix error EIR type in config eir event 2020-01-20 20:46:05 +08:00
Tian Hao
30fbd99ad0 fix bug sleep may cause HCI timeout
When Host run different cpu and sleep enable, it may cause hci
timeout about 10s.
2020-01-20 17:44:03 +08:00
Tian Hao
f351effdb2 fix Kconfig use mistake cause some config not effect
1. Fix bluedroid task pinned_to_core un-effected
2. other minor sdkconfig bugs
2020-01-20 17:43:36 +08:00
baohongde
5ca4c85497 components/bt: Fix connection fail and crash when receive unknown AT cmd 2020-01-20 11:32:26 +08:00
June
19730c81f0 esp32 5p0 new features support 2020-01-17 10:34:54 +00:00
weitianhua
8b2919ee2b hfp disconn issue for bridgera 2020-01-15 12:22:58 +08:00
zhiweijian
86bebae4fb Component/bt: Fix GATTC trigger open event multiple times 2020-01-14 03:24:29 +00:00
Jiang Jiang Jian
0a6e61ae6d Merge branch 'bugfix/btdm_fix_blufi_prepare_buf_len_invalid' into 'master'
component/bt: fix blufi prepare write buf len invalid

See merge request espressif/esp-idf!7048
2020-01-13 15:59:14 +08:00
Jiang Jiang Jian
a27dfe6993 Merge branch 'bugfix/fix_ble_config_error_log_in_first_use_nvs' into 'master'
bugfix: remove the error code when there is no file in the nvs in config.c

See merge request espressif/esp-idf!7296
2020-01-13 10:24:43 +08:00
Jiang Jiang Jian
7a7c4a5486 Merge branch 'bugfix/coex_schm' into 'master'
Bugfix/coex schm

See merge request espressif/esp-idf!7176
2020-01-12 20:37:42 +08:00
Jiang Jiang Jian
3634192ded Merge branch 'bugfix/ble_throughput_heap_size_too_large_fix' into 'master'
bugfix:Fixed throughput wasting memory and packet loss issues.

Closes BT-437 and BCI-141

See merge request espressif/esp-idf!7063
2020-01-12 20:25:02 +08:00
Jiang Jiang Jian
8ec233dfd0 Merge branch 'bugfix/sync_zephyr_v2.0_ble_mesh_fixes' into 'master'
ble_mesh: sync Zephyr v2.0 ble mesh fixes

Closes BLEMESH-56

See merge request espressif/esp-idf!6892
2020-01-12 20:23:57 +08:00
gengyuchao
3366467980 ble:set a esp api to get size of controller send packets buffer. 2020-01-10 20:32:07 +08:00
gengyuchao
189cd21660 bugfix:Fixed throughput wasting memory and packet loss issues. 2020-01-10 20:32:07 +08:00
gengyuchao
8e1a28940c ble:config.c remove the error code when there is no file in the nvs because it is not an error. 2020-01-10 20:04:10 +08:00
baohongde
a2398f0dcc components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-01-10 16:00:12 +08:00
Jiang Jiang Jian
2f23fa8ab7 Merge branch 'bugfix/bt_osi_config_snprintf_add_length_check' into 'master'
bugfix:Fix length check for snprintf in osi config

See merge request espressif/esp-idf!7155
2020-01-10 15:06:37 +08:00
Jiang Jiang Jian
8cf4d02720 Merge branch 'bugfix/ble_mesh_update_lightness_last' into 'master'
ble_mesh: Update lightness last state when actual state is changed

See merge request espressif/esp-idf!7206
2020-01-10 14:47:29 +08:00
Angus Gratton
bdf6c00154 Merge branch 'feature/likely_unlikely' into 'master'
Adding likely unlikely macros to hot code paths

Closes IDF-284

See merge request espressif/esp-idf!6368
2020-01-10 14:05:07 +08:00
Jiang Jiang Jian
9ecc2c3309 Merge branch 'bugfix/fix_ble_mesh_memory_leak' into 'master'
ble_mesh: Fix memory leak when node is reset

Closes BLEMESH-122

See merge request espressif/esp-idf!7076
2020-01-10 11:43:49 +08:00
gengyuchao
8a687d46ad reduce useless calloc size 2020-01-09 21:12:48 +08:00
gengyuchao
945e4f7162 bugfix:Fix length check for snprintf in osi config 2020-01-09 21:12:48 +08:00
zhiweijian
b820b3fc56 component/bt: fix blufi prepare write buf len invalid 2020-01-09 09:38:35 +00:00
Geng Yu Chao
090843fa17 component/bt: Fix the issue with pointer type conversion in gattc. Unified count pointer type in bta and btc, change pointer type in bta from int to uint16_t. 2020-01-09 16:30:55 +08:00
Jiang Jiang Jian
dd8db6621b Merge branch 'bugfix/add_missing_gatt_descriptors_GH' into 'master'
bugfix: ble add missing gatt descriptors

Closes BCI-138

See merge request espressif/esp-idf!6978
2020-01-09 15:57:08 +08:00
Jiang Jiang Jian
da877bcc8f Merge branch 'bugfix/coex_bt_ble_stuck' into 'master'
components/bt: Fix A2DP stuck when BLE's interval is too small

See merge request espressif/esp-idf!5587
2020-01-09 11:37:35 +08:00
gengyuchao
7e54ac08e6 ble Fix typo and add some comment 2020-01-08 04:17:49 +00:00
Brian Friedkin
efc514fa0a add missing gatt descriptors 2020-01-08 04:17:49 +00:00
weitianhua
39a5eb84f3 Disable sniff mode during (e)SCO connection. 2020-01-07 03:15:32 +00:00
baohongde
f9802da461 components/bt: Fix A2DP stuck when BLE's interval is too small
1. Fix the cumulative time switch from BLE to classic BT
2. Enhance classic BT performance while enable calssic BT and BLE at the same time
2020-01-06 20:22:04 +08:00
lly
8116a787cd ble_mesh: Fix PreviousAddress endianess in Friend Request
The upper transport layer is using big endian ordering. The
PreviousAddress field of a Friend Request message should therefore
be converted to native endianess using sys_cpu_to_be16().
2020-01-06 16:19:03 +08:00
lly
fc80d107ad ble_mesh: Fix next_period computation
If the duration to publish is roughly the same as the period, we might
end up with elapsed == period, which returns 0 and cancel the periodic
publication. Instead 1 should be returned, just like when the elapsed
time is greater than the period.
2020-01-06 16:17:36 +08:00
lly
7d7bbec5fe ble_mesh: Make model publication struct more compact
Previously the FastPeriodDivisor value was introduced to the model
publication struct. Based on the way it was grouped it seems the
intention was to fit it within the same octet as other bit fields,
but it actually makes the octet overflow by one bit. This ends up
creating another u8_t variable which in turn adds 24 bits of padding
after it.

To keep the size of the struct as compact as possible, group the flag
together with the key index, since that only requires 12 bits. Some
care is needed here, since the mesh stack does have special internal
key index values that require more than 12 bits such as
BLE_MESH_KEY_UNUSED and BLE_MESH_KEY_DEV. In this case restricting
ourselves to 12 bits is fine since the value in the model publication
struct follows 1:1 the value received in the Config Model Publication
Set message, and there the parameter is defined to be exactly 12 bits.
2020-01-06 16:17:36 +08:00
lly
82b4b89dea ble_mesh: Fix compile error when using release optimization level 2020-01-06 16:17:36 +08:00
lly
b836674d8e ble_mesh: Remove useless CONFIG_BLE_MESH_NODE
For Low Power node and Proxy Server, the two features
depend on BLE_MESH_NODE in Kconfig.in, here in the
stack there is no need to judge if CONFIG_BLE_MESH_NODE
is enabled.
2020-01-06 16:17:36 +08:00
lly
d83c37faed ble_mesh: Fixes Provisioner not support friend feature 2020-01-06 16:17:36 +08:00
lly
77e7d023b9 ble_mesh: Fixes wrong subnet info used for Friend Clear
When Friend node tries to send Friend Clear message to other
Friend nodes, it should use the subnet information based on
the net_idx from friendship.
2020-01-06 16:17:36 +08:00
lly
131a4e7c22 ble_mesh: fix provisioner failed to send msg to 0xFFFF
According to Mesh Spec 3.4.5.3, a node shall implement a local
network interface. And here we limit the situation just based
on the spec, and Provisioner directly sending the msg without
passing through the local network interface.
2020-01-06 16:17:36 +08:00
lly
197e54053e ble_mesh: fix virtual addr wrong return value
Fixes missing return value on `va_del`
Fixes wrong return value on `va_add`
2020-01-06 16:17:36 +08:00
lly
e8440ac2f9 ble_mesh: Persistent storage of Virtual Address
The 16-bit format group addresses will be stored,
but we don't store (or restore) the virtual label UUIDs,
i.e. after a power cycle the 16-bit group addresses
would be meaningless.
2020-01-06 16:17:36 +08:00
lly
74d0bd3134 ble_mesh: Proxy forwards ALL_NODES addr
Unless explicitly blacklisted, the Proxy node will forward all messages
for the ALL_NODES address to the GATT proxy client.
2020-01-06 16:17:36 +08:00
lly
1338fc4ff1 ble_mesh: Model message macros
Creates macros for determining model message lengths based on opcode,
payload length and MIC size. Also adds macro wrapping
NET_BUF_SIMPLE_DEFINE to serve the most common use case.
2020-01-06 16:17:36 +08:00
lly
f3b9b099cd ble_mesh: Use net_buf_simple_clone
Uses net_buf_simple_clone to access the sdu of an unsegmented app packet
for re-encryption.
2020-01-06 16:17:36 +08:00
lly
aec696a3a4 ble_mesh: Skip local messages in rx
Local messages are already enqueued for the LPN in the tx path, and
don't have to be added again in the rx path.
2020-01-06 16:17:36 +08:00
lly
6516ab71ea ble_mesh: Ensure seqnum match in app/net
Re-encrypts single-segment application messages when the network seqnum
has changed, to avoid encrypting messages with different seqnums in
network and transport. This operation is only required for unsegmented
messages, as segmented messages don't need to use the same seqnum in
network.

Reinstates the special adv data for friend messages to store the app key
index.
2020-01-06 16:17:36 +08:00
lly
b88dbf6348 ble_mesh: Expose app key get function 2020-01-06 16:17:36 +08:00