diff --git a/components/idf_test/integration_test/TestCaseAll.yml b/components/idf_test/integration_test/TestCaseAll.yml index 0835c146b..a7f63a185 100644 --- a/components/idf_test/integration_test/TestCaseAll.yml +++ b/components/idf_test/integration_test/TestCaseAll.yml @@ -87,7 +87,7 @@ test cases: - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 0.0.0.0 - - ['R SSC1 C +IP:OK'] + - [R SSC1 C +IP] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 20 @@ -121,54 +121,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test - version: v1 (2016-8-15) -- CI ready: 'Yes' - ID: TCPIP_DHCP_0102 - SDK: '8266_NonOS - - 8266_RTOS - - ESP32_IDF' - Test App: SSC - allow fail: '' - auto test: 'Yes' - category: Function - cmd set: - - '' - - - SSC SSC1 ap -S -s -p -t - - ['R SSC1 C +SAP:OK'] - - - SSC SSC1 dhcp -E -o 2 - - ['R SSC1 C +DHCP:AP,OK'] - - - SSC SSC2 sta -C -s -p - - [''] - - - DELAY 20 - - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - - SSC SSC1 dhcp -S -o 2 - - ['R SSC1 C +DHCP:AP,OK'] - - - SSC SSC2 sta -C -s -p - - ['R SSC2 C +JAP:CONNECTED'] - comment: '' - execution time: 0.0 - expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ - \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" - initial condition: T2_1 - initial condition description (auto): target 1 as SoftAP, target 2 as STA, will - autogen a TC with initial condition T2_2 - level: Integration - module: TCPIP - steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ - 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" - sub module: DHCP - summary: dhcp server function test - test environment: SSC_T2_1 - test environment description (auto): 'PC has 1 wired NIC connected to AP. - - PC has 1 WiFi NIC. - - 2 SSC target connect with PC by UART.' - test point 1: basic function - test point 2: DHCP client function test - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_DHCP_0103 SDK: '8266_NonOS @@ -967,6 +920,53 @@ test cases: test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0212 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ + \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ + 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + sub module: DHCP + summary: dhcp server function test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_DHCP_0301 SDK: '8266_NonOS @@ -987,7 +987,7 @@ test cases: - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 - - ['R SSC1 C +IP:OK'] + - [R SSC1 C +IP] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 10 @@ -1027,7 +1027,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_DHCP_0302 SDK: '8266_NonOS @@ -3189,14 +3189,12 @@ test cases: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t TCP + - - SSC SSC1 soc -B -t TCP -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 @@ -3246,7 +3244,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_TCP_0206 SDK: '8266_NonOS @@ -3280,7 +3278,7 @@ test cases: - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', - 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 @@ -3531,14 +3529,12 @@ test cases: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t TCP + - - SSC SSC1 soc -B -t TCP -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 @@ -3586,7 +3582,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_TCP_0212 SDK: '8266_NonOS @@ -3620,7 +3616,7 @@ test cases: - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', - 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 @@ -5119,10 +5115,8 @@ test cases: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t UDP -p + - - SSC SSC1 soc -B -t UDP -p -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 @@ -5180,7 +5174,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_UDP_0202 SDK: '8266_NonOS @@ -5198,8 +5192,8 @@ test cases: - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 @@ -5257,7 +5251,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: TCPIP_UDP_0301 SDK: '8266_NonOS @@ -7915,7 +7909,7 @@ test cases: - - SSC SSC1 sta -S - [''] - - SSC SSC1 sta -S - - [P SSC1 C +SCANFAIL, 'P SSC1 P +SCAN:', R SSC1 C +SCANDONE] + - [P SSC1 C +SCANFAIL, 'P SSC1 C +SCAN:', R SSC1 C +SCANDONE] comment: '' execution time: 0.0 expected result: '1. second scan failed @@ -7931,14 +7925,12 @@ test cases: 2. do scan before scan finished' sub module: WIFI Scan summary: reject scan request before scan finished - test environment: SSC_T2_PhyMode - test environment description (auto): '2 SSC target connect with PC by UART. + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. - PC has one WiFi NIC support capture wlan packet using libpcap. + PC has 1 WiFi NIC. - Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. - - Put 4 APs near SSC targets.' + 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: Scan interact with other WiFi operation version: v1 (2015-8-15) @@ -7987,14 +7979,12 @@ test cases: 3. target 2 scan in AP channel in 11b.g,n,ht40 mode' sub module: WIFI Scan summary: scan in congest channel - test environment: SSC_T2_PhyMode - test environment description (auto): '2 SSC target connect with PC by UART. + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. - PC has one WiFi NIC support capture wlan packet using libpcap. + PC has 1 WiFi NIC. - Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. - - Put 4 APs near SSC targets.' + 2 SSC target connect with PC by UART.' test point 1: interaction test point 2: Scan interact with other WiFi operation version: v1 (2015-8-15) @@ -8022,8 +8012,9 @@ test cases: expected result: '2. scan succeed, JAP succeed 5. JAP succeed, scan succeed' - initial condition: T2_2 - initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 level: Integration module: WIFI MAC steps: '1. target 1 STA join AP @@ -8037,14 +8028,12 @@ test cases: 5. target 1 JAP before scan succeed' sub module: WIFI Scan summary: scan during JAP - test environment: SSC_T2_PhyMode - test environment description (auto): '2 SSC target connect with PC by UART. + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. - PC has one WiFi NIC support capture wlan packet using libpcap. + PC has 1 WiFi NIC. - Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. - - Put 4 APs near SSC targets.' + 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: Scan interact with other WiFi operation version: v1 (2015-8-15) @@ -8087,14 +8076,12 @@ test cases: 5. target 2 STA JAP before target 1 STA scan succeed' sub module: WIFI Scan summary: scan during ext STA join SoftAP - test environment: SSC_T2_PhyMode - test environment description (auto): '2 SSC target connect with PC by UART. + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. - PC has one WiFi NIC support capture wlan packet using libpcap. + PC has 1 WiFi NIC. - Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. - - Put 4 APs near SSC targets.' + 2 SSC target connect with PC by UART.' test point 1: interaction test point 2: Scan interact with other WiFi operation version: v1 (2015-8-15) @@ -8114,7 +8101,7 @@ test cases: - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 0.0.0.0 - - ['R SSC1 C +IP:OK'] + - [R SSC1 C +IP] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 20 @@ -8148,53 +8135,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test - version: v1 (2016-8-15) -- CI ready: 'Yes' - ID: ^TCPIP_DHCP_0102 - SDK: '8266_NonOS - - 8266_RTOS - - ESP32_IDF' - Test App: SSC - allow fail: '' - auto test: 'Yes' - category: Function - cmd set: - - '' - - - SSC SSC1 ap -S -s -p -t - - ['R SSC1 C +SAP:OK'] - - - SSC SSC1 dhcp -E -o 2 - - ['R SSC1 C +DHCP:AP,OK'] - - - SSC SSC2 sta -C -s -p - - [''] - - - DELAY 20 - - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - - SSC SSC1 dhcp -S -o 2 - - ['R SSC1 C +DHCP:AP,OK'] - - - SSC SSC2 sta -C -s -p - - ['R SSC2 C +JAP:CONNECTED'] - comment: '' - execution time: 0.0 - expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ - \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" - initial condition: T2_2 - initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) - level: Integration - module: TCPIP - steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ - 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" - sub module: DHCP - summary: dhcp server function test - test environment: SSC_T2_1 - test environment description (auto): 'PC has 1 wired NIC connected to AP. - - PC has 1 WiFi NIC. - - 2 SSC target connect with PC by UART.' - test point 1: basic function - test point 2: DHCP client function test - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0103 SDK: '8266_NonOS @@ -8982,6 +8923,52 @@ test cases: test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0212 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ + \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ + 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + sub module: DHCP + summary: dhcp server function test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0301 SDK: '8266_NonOS @@ -9002,7 +8989,7 @@ test cases: - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 - - ['R SSC1 C +IP:OK'] + - [R SSC1 C +IP] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 10 @@ -9042,7 +9029,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0302 SDK: '8266_NonOS @@ -11199,14 +11186,12 @@ test cases: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t TCP + - - SSC SSC1 soc -B -t TCP -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 @@ -11254,7 +11239,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_TCP_0206 SDK: '8266_NonOS @@ -11288,7 +11273,7 @@ test cases: - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', - 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 @@ -11539,14 +11524,12 @@ test cases: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t TCP + - - SSC SSC1 soc -B -t TCP -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 @@ -11592,7 +11575,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_TCP_0212 SDK: '8266_NonOS @@ -11626,7 +11609,7 @@ test cases: - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', - 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 @@ -12981,10 +12964,8 @@ test cases: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - - SSC SSC1 soc -B -t UDP -p + - - SSC SSC1 soc -B -t UDP -p -w 0 - ['R SSC1 A :BIND:(\d+),OK'] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 @@ -13042,7 +13023,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_UDP_0202 SDK: '8266_NonOS @@ -13060,8 +13041,8 @@ test cases: - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - - SSC SSC1 soc -W -s -o 0 - - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 @@ -13119,7 +13100,7 @@ test cases: 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state - version: v1 (2016-8-15) + version: v2 (2016-10-19) - CI ready: 'Yes' ID: ^TCPIP_UDP_0301 SDK: '8266_NonOS @@ -14652,67 +14633,3 @@ test cases: test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) -- CI ready: 'Yes' - ID: ^WIFI_SCAN_0105 - SDK: '8266_NonOS - - 8266_RTOS - - ESP32_IDF' - Test App: SSC - allow fail: '' - auto test: 'Yes' - category: Function - cmd set: - - '' - - - SSC SSC1 sta -D - - ['R SSC1 C +QAP:'] - - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 -n 11 - - ['R SSC1 C +SAP:OK'] - - - SSC SSC2 sta -S -s -b -n 11 - - [R SSC2 P C +SCANDONE] - - - SSC SSC2 sta -S -s -b -n 11 - - [R SSC2 NP C +SCANDONE] - - - SSC SSC2 sta -S -s -b ff:ff:ff:ff:ff:11 -n 11 - - [R SSC2 P , R SSC2 NP C +SCANDONE] - - - SSC SSC2 sta -S -s -b -n 10 - - [R SSC2 P , R SSC2 NP C +SCANDONE] - comment: '' - execution time: 0.0 - expected result: '1.target1 QAP - - 2. target1 set AP,set ssid broad cast,set channel 11 - - 3.target2 上查询到 - - 4.target2 上查询不到 - - 5.target2 上查询不到 - - 6.target2 上查询不到' - initial condition: T2_2 - initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) - level: Integration - module: WIFI MAC - steps: '1.target1 QAP - - 2. target1 set AP,set ssid broad cast,set channel 11 - - 3.target2 上查询到 - - 4.target2 上查询不到 - - 5.target2 上查询不到 - - 6.target2 上查询不到' - sub module: WIFI Scan - summary: scan with several configs - test environment: SSC_T2_1 - test environment description (auto): 'PC has 1 wired NIC connected to AP. - - PC has 1 WiFi NIC. - - 2 SSC target connect with PC by UART.' - test point 1: basic function - test point 2: scan with different config - version: v1 (2016-8-15)