ci: add build system tests for bootloader flash mode/freq/size
This commit is contained in:
parent
09950797cb
commit
cbb6beccd9
|
@ -288,6 +288,25 @@ function run_tests()
|
|||
( make 2>&1 | grep "does not fit in configured flash size 1MB" ) || failure "Build didn't fail with expected flash size failure message"
|
||||
mv sdkconfig.bak sdkconfig
|
||||
|
||||
print_status "Flash size is correctly set in the bootloader image header"
|
||||
# Build with the default 2MB setting
|
||||
rm sdkconfig
|
||||
make defconfig && make bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0210"
|
||||
# Change to 4MB
|
||||
echo "CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y" > sdkconfig
|
||||
make defconfig && make bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0220"
|
||||
# Change to QIO, bootloader should still be DIO (will change to QIO in 2nd stage bootloader)
|
||||
echo "CONFIG_FLASHMODE_QIO=y" > sdkconfig
|
||||
make defconfig && make bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0210"
|
||||
# Change to 80 MHz
|
||||
echo "CONFIG_ESPTOOLPY_FLASHFREQ_80M=y" > sdkconfig
|
||||
make defconfig && make bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "021f"
|
||||
rm sdkconfig
|
||||
|
||||
print_status "sdkconfig should have contents of all files: sdkconfig, sdkconfig.defaults, sdkconfig.defaults.IDF_TARGET"
|
||||
make clean > /dev/null;
|
||||
rm -f sdkconfig.defaults;
|
||||
|
@ -491,5 +510,17 @@ function clean_build_dir()
|
|||
rm -rf --preserve-root ${BUILD}/*
|
||||
}
|
||||
|
||||
# check the bytes 3-4 of the binary image header. e.g.:
|
||||
# bin_header_match app.bin 0210
|
||||
function bin_header_match()
|
||||
{
|
||||
expected=$2
|
||||
filename=$1
|
||||
actual=$(xxd -s 2 -l 2 -ps $1)
|
||||
if [ ! "$expected" = "$actual" ]; then
|
||||
failure "Incorrect binary image header, expected $expected got $actual"
|
||||
fi
|
||||
}
|
||||
|
||||
cd ${TESTDIR}
|
||||
run_tests
|
||||
|
|
|
@ -595,6 +595,31 @@ endmenu\n" >> ${IDF_PATH}/Kconfig
|
|||
rm idf_project.yml
|
||||
git checkout main/main.c
|
||||
|
||||
print_status "Build fails if partitions don't fit in flash"
|
||||
sed -i.bak "s/CONFIG_ESPTOOLPY_FLASHSIZE.\+//" sdkconfig # remove all flashsize config
|
||||
echo "CONFIG_ESPTOOLPY_FLASHSIZE_1MB=y" >> sdkconfig # introduce undersize flash
|
||||
( idf.py build 2>&1 | grep "does not fit in configured flash size 1MB" ) || failure "Build didn't fail with expected flash size failure message"
|
||||
mv sdkconfig.bak sdkconfig
|
||||
|
||||
print_status "Flash size is correctly set in the bootloader image header"
|
||||
# Build with the default 2MB setting
|
||||
rm sdkconfig
|
||||
idf.py bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0210"
|
||||
# Change to 4MB
|
||||
echo "CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y" > sdkconfig
|
||||
idf.py bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0220"
|
||||
# Change to QIO, bootloader should still be DIO (will change to QIO in 2nd stage bootloader)
|
||||
echo "CONFIG_FLASHMODE_QIO=y" > sdkconfig
|
||||
idf.py bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "0210"
|
||||
# Change to 80 MHz
|
||||
echo "CONFIG_ESPTOOLPY_FLASHFREQ_80M=y" > sdkconfig
|
||||
idf.py bootloader || failure "Failed to build bootloader"
|
||||
bin_header_match build/bootloader/bootloader.bin "021f"
|
||||
rm sdkconfig
|
||||
|
||||
print_status "All tests completed"
|
||||
if [ -n "${FAILURES}" ]; then
|
||||
echo "Some failures were detected:"
|
||||
|
@ -722,5 +747,17 @@ function clean_build_dir()
|
|||
rm -rf $PRESERVE_ROOT_ARG ${BUILD}/* ${BUILD}/.*
|
||||
}
|
||||
|
||||
# check the bytes 3-4 of the binary image header. e.g.:
|
||||
# bin_header_match app.bin 0210
|
||||
function bin_header_match()
|
||||
{
|
||||
expected=$2
|
||||
filename=$1
|
||||
actual=$(xxd -s 2 -l 2 -ps $1)
|
||||
if [ ! "$expected" = "$actual" ]; then
|
||||
failure "Incorrect binary image header, expected $expected got $actual"
|
||||
fi
|
||||
}
|
||||
|
||||
cd ${TESTDIR}
|
||||
run_tests
|
||||
|
|
Loading…
Reference in a new issue