Merge branch 'doc/rmt_readme_typo_fix' into 'master'
doc(rmt): fixed some typos in rmt example readme file See merge request idf/esp-idf!3283
This commit is contained in:
commit
a95dd4712b
2 changed files with 4 additions and 4 deletions
|
@ -8,7 +8,7 @@ This example uses the remote control (RMT) peripheral to transmit and receive co
|
||||||
|
|
||||||
### Hardware Required
|
### Hardware Required
|
||||||
|
|
||||||
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
|
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
||||||
* A USB cable for Power supply and programming
|
* A USB cable for Power supply and programming
|
||||||
|
|
||||||
By default, this example runs a self test which assumes the TX pin (GPIO18) and RX pin (GPIO19) are _connected together_.
|
By default, this example runs a self test which assumes the TX pin (GPIO18) and RX pin (GPIO19) are _connected together_.
|
||||||
|
@ -77,4 +77,4 @@ NEC: RMT RCV --- addr: 0xda25 cmd: 0xeb14
|
||||||
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
|
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
|
||||||
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
|
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
|
||||||
|
|
||||||
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
||||||
|
|
|
@ -8,7 +8,7 @@ This example will shows how to configure and operate the remote control (RMT) pe
|
||||||
|
|
||||||
### Hardware Required
|
### Hardware Required
|
||||||
|
|
||||||
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
|
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
||||||
* A USB cable for Power supply and programming
|
* A USB cable for Power supply and programming
|
||||||
* A LED, a speaker or an earphone
|
* A LED, a speaker or an earphone
|
||||||
|
|
||||||
|
@ -64,4 +64,4 @@ RMT Tx: Sample transmission complete
|
||||||
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
|
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
|
||||||
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
|
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
|
||||||
|
|
||||||
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
||||||
|
|
Loading…
Reference in a new issue