Pin descriptions, overview diagram and board dimensions carried over from ESP32-PICO-KIT_Datasheet_EN.pdf. The datasheet looks redundant and will not be used.
This commit is contained in:
krzychb
Ivan Grokhotkov
parent
cc46b5054a
commit
a1c79bbc7b
5 changed files with 126 additions and 9 deletions
BIN
docs/_static/esp32-pico-kit-v4-dimensions-back.jpg
vendored
Normal file
BIN
docs/_static/esp32-pico-kit-v4-dimensions-back.jpg
vendored
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 49 KiB |
BIN
docs/_static/esp32-pico-kit-v4-dimensions-side.jpg
vendored
Normal file
BIN
docs/_static/esp32-pico-kit-v4-dimensions-side.jpg
vendored
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
BIN
docs/_static/esp32-pico-kit-v4-functional-block-diagram.png
vendored
Normal file
BIN
docs/_static/esp32-pico-kit-v4-functional-block-diagram.png
vendored
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
BIN
docs/_static/esp32-pico-kit-v4-layout.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v4-layout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 77 KiB After Width: | Height: | Size: 81 KiB |
|
|
@ -11,15 +11,30 @@ What You Need
|
|||
* 1 × USB A / Micro USB B cable
|
||||
* 1 × PC loaded with Windows, Linux or Mac OS
|
||||
|
||||
If you like to start using this board right now, go directly to section `Start Application Development`_.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT V4 is a mini development board based on the ESP32-PICO-D4 SIP module produced by `Espressif <https://espressif.com>`_. For easy interfacing, all the IO signals and system power on ESP32-PICO-D4 are led out through two 20 x 0.1" pitch header pads on both sides of the development board. To make the ESP32-PICO-KIT V4 fit into mini breadboards, the header pads are populated with two 17 pin headers. Remaining 2 x 3 pads grouped on one side of the board besides the antenna are not populated. If required, the additional 2 x 3 pin headers may be soldered later by the user. The development board integrates a USB-UART Bridge circuit, allowing the developers to connect the board to a PC's USB port for downloads and debugging.
|
||||
ESP32-PICO-KIT V4 is a mini development board produced by `Espressif <https://espressif.com>`_. At the core of this board is the ESP32-PICO-D4, a System-in-Package (SIP) module with complete Wi-Fi and Bluetooth functionalities. Comparing to other ESP32 chips, the ESP32-PICO-D4 integrates several peripheral components in one single package, that otherwise would need to be installed separately. This includes a 40 MHz crystal oscillator, 4 MB flash, filter capacitors and RF matching links in. This greatly reduces quantity and costs of additional components, subsequent assembly and testing cost, as well as overall product complexity.
|
||||
|
||||
The development board integrates a USB-UART Bridge circuit, allowing the developers to connect the board to a PC's USB port for downloads and debugging.
|
||||
|
||||
For easy interfacing, all the IO signals and system power on ESP32-PICO-D4 are led out through two rows of 20 x 0.1" pitch header pads on both sides of the development board. To make the ESP32-PICO-KIT V4 fit into mini breadboards, the header pads are populated with two rows of 17 pin headers. Remaining 2 x 3 pads grouped on each side of the board besides the antenna are not populated. The remaining 2 x 3 pin headers may be soldered later by the user.
|
||||
|
||||
.. note::
|
||||
|
||||
The 2 x 3 pads not populated with pin headers are internally connected to the flash memory embedded in the ESP32-PICO-D4 SIP module. For more details see module's datasheet in :ref:`get-started-pico-kit-v4-related-documents`.
|
||||
The 2 x 3 pads not populated with pin headers are internally connected to the flash memory embedded in the ESP32-PICO-D4 SIP module. For more details see module's datasheet in `Related Documents`_.
|
||||
|
||||
The board dimensions are 52 x 20.3 x 10 mm (2.1" x 0.8" x 0.4"), see section `Board Dimensions`_. An overview functional block diagram is shown below.
|
||||
|
||||
.. figure:: ../_static/esp32-pico-kit-v4-functional-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V4 functional block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT V4 functional block diagram
|
||||
|
||||
|
||||
Functional Description
|
||||
|
|
@ -29,16 +44,20 @@ The following list and figure below describe key components, interfaces and cont
|
|||
|
||||
ESP32-PICO-D4
|
||||
Standard ESP32-PICO-D4 module soldered to the ESP32-PICO-KIT V4 board. The complete system of the ESP32 chip has been integrated into the SIP module, requiring only external antenna with LC matching network, decoupling capacitors and pull-up resistors for EN signals to function properly.
|
||||
LDO
|
||||
5V-to-3.3V Low dropout voltage regulator (LDO).
|
||||
USB-UART Bridge
|
||||
A single chip USB-UART bridge provides up to 1 Mbps transfers rates.
|
||||
I/O
|
||||
All the pins on ESP32-PICO-D4 are broken out to the pin headers on the board. Users can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc.
|
||||
Micro USB Port
|
||||
USB interface. It functions as the power supply for the board and the communication interface between PC and ESP32-PICO-KIT V4.
|
||||
EN Button
|
||||
Reset button; pressing this button resets the system.
|
||||
5V Power On LED
|
||||
This light emitting diode lits when the USB or an external 5V power supply is applied to the board. For details see schematic in `Related Documents`_.
|
||||
I/O
|
||||
All the pins on ESP32-PICO-D4 are broken out to the pin headers on the board. Users can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc. For details please see section `Pin Descriptions`_.
|
||||
BOOT Button
|
||||
Holding down the Boot button and pressing the EN button initiates the firmware download mode. Then user can download firmware through the serial port.
|
||||
EN Button
|
||||
Reset button; pressing this button resets the system.
|
||||
|
||||
.. _get-started-pico-kit-v4-board-front:
|
||||
|
||||
|
|
@ -65,7 +84,7 @@ There following options are available to provide power supply to the ESP32-PICO-
|
|||
|
||||
|
||||
Start Application Development
|
||||
------------------------------
|
||||
-----------------------------
|
||||
|
||||
Before powering up the ESP32-PICO-KIT V4, please make sure that the board has been received in good condition with no obvious signs of damage.
|
||||
|
||||
|
|
@ -77,7 +96,106 @@ To start development of applications, proceed to section :doc:`index`, that will
|
|||
* :ref:`get-started-build-monitor` instantly what the application is doing
|
||||
|
||||
|
||||
.. _get-started-pico-kit-v4-related-documents:
|
||||
Pin Descriptions
|
||||
----------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of I/O headers on both sides of the board, see :ref:`get-started-pico-kit-v4-board-front`. The pin numbering and header names are the same as on a schematic in `Related Documents`_.
|
||||
|
||||
|
||||
Header J2
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
No. Name Type Function
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_SD1 (FSD1) I/O | GPIO8, SD_DATA1, SPID, HS1_DATA1 :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U2CTS
|
||||
2 FLASH_SD3 (FSD3) I/O | GPIO7, SD_DATA0, SPIQ, HS1_DATA0 :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U2RTS
|
||||
3 FLASH_CLK (FCLK) I/O | GPIO11, SD_CMD, SPICS0, HS1_CMD :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U1RTS
|
||||
4 IO21 I/O | GPIO21, VSPIHD, EMAC_TX_EN
|
||||
5 IO22 I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
6 IO19 I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
7 IO23 I/O | GPIO23, VSPID, HS1_STROBE
|
||||
8 IO18 I/O | GPIO18, VSPICLK, HS1_DATA7
|
||||
9 IO5 I/O | GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||||
10 IO10 I/O | GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
|
||||
11 IO9 I/O | GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
|
||||
12 RXD0 I/O | GPIO3, U0RXD :ref:`(4) <get-started-pico-kit-v4-pin-notes>` , CLK_OUT2
|
||||
13 TXD0 I/O | GPIO1, U0TXD :ref:`(4) <get-started-pico-kit-v4-pin-notes>` , CLK_OUT3, EMAC_RXD2
|
||||
14 IO35 I | ADC1_CH7, RTC_GPIO5
|
||||
15 IO34 I | ADC1_CH6, RTC_GPIO4
|
||||
16 IO38 I | GPIO38, ADC1_CH2, ADC_PRE_AMP :ref:`(2b) <get-started-pico-kit-v4-pin-notes>` , RTC_GPIO2
|
||||
17 IO37 I | GPIO37, ADC_PRE_AMP :ref:`(2a) <get-started-pico-kit-v4-pin-notes>` , ADC1_CH1, RTC_GPIO1
|
||||
18 EN I | CHIP_PU
|
||||
19 GND P | Ground
|
||||
20 VDD33 (3V3) P | 3.3V power supply
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
No. Name Type Function
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_CS (FCS) I/O | GPIO16, HS1_DATA4 :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U2RXD, EMAC_CLK_OUT
|
||||
2 FLASH_SD0 (FSD0) I/O | GPIO17, HS1_DATA5 :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U2TXD, EMAC_CLK_OUT_180
|
||||
3 FLASH_SD2 (FSD2) I/O | GPIO6, SD_CLK, SPICLK, HS1_CLK :ref:`(1) <get-started-pico-kit-v4-pin-notes>` , U1CTS
|
||||
4 SENSOR_VP (FSVP) I | GPIO36, ADC1_CH0, ADC_PRE_AMP :ref:`(2a) <get-started-pico-kit-v4-pin-notes>` , RTC_GPIO0
|
||||
5 SENSOR_VN (FSVN) I | GPIO39, ADC1_CH3, ADC_PRE_AMP :ref:`(2b) <get-started-pico-kit-v4-pin-notes>` , RTC_GPIO3
|
||||
6 IO25 I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
7 IO26 I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
8 IO32 I/O | 32K_XP :ref:`(3a) <get-started-pico-kit-v4-pin-notes>` , ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
9 IO33 I/O | 32K_XN :ref:`(3b) <get-started-pico-kit-v4-pin-notes>` , ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
10 IO27 I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17
|
||||
| EMAC_RX_DV
|
||||
11 IO14 I/O | ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK,
|
||||
| HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
12 IO12 I/O | ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI :ref:`(5) <get-started-pico-kit-v4-pin-notes>` , HSPIQ,
|
||||
| HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
13 IO13 I/O | ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID,
|
||||
| HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
14 IO15 I/O | ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0
|
||||
| HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
15 IO2 I/O | ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP,
|
||||
| HS2_DATA0, SD_DATA0
|
||||
16 IO4 I/O | ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD,
|
||||
| HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
17 IO0 I/O | ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1
|
||||
| EMAC_TX_CLK
|
||||
18 VDD33 (3V3) P | 3.3V power supply
|
||||
19 GND P | Ground
|
||||
20 EXT_5V (5V) P | 5V power supply
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
.. _get-started-pico-kit-v4-pin-notes:
|
||||
|
||||
**Notes to** `Pin Descriptions`_
|
||||
|
||||
1. This pin is connected to the flash pin of ESP32-PICO-D4.
|
||||
2. When used as ADC_PRE_AMP, connect 270 pF capacitors between: (a) SENSOR_VP and IO37, (b) SENSOR_VN and IO38.
|
||||
3. 32.768 kHz crystal oscillator: (a) input, (b) output.
|
||||
4. This pin is connected to the pin of the USB bridge chip on the board.
|
||||
5. The operating voltage of ESP32-PICO-KIT’s embedded SPI flash is 3.3V. Therefore, the strapping pin MTDI should hold bit ”0” during the module power-on reset.
|
||||
|
||||
|
||||
Board Dimensions
|
||||
----------------
|
||||
|
||||
.. figure:: ../_static/esp32-pico-kit-v4-dimensions-back.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V4 dimensions - back
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT V4 dimensions - back
|
||||
|
||||
.. figure:: ../_static/esp32-pico-kit-v4-dimensions-side.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V4 dimensions - side
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT V4 dimensions - side
|
||||
|
||||
|
||||
Related Documents
|
||||
-----------------
|
||||
|
|
@ -86,7 +204,6 @@ Related Documents
|
|||
* `ESP32-PICO-D4 Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../hw-reference/index`
|
||||
|
||||
.. * `ESP32-PICO-KIT Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-kit_datasheet_en.pdf>`_ (PDF)
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
|
|
|||
Loading…
Reference in a new issue