Component/bt: add ble link timeout config in menuconfig

- add ble link timeout config in menuconfig
- disable background connection when call gatts_open
This commit is contained in:
zhiweijian 2019-04-16 11:11:08 +08:00
parent bb73659c9c
commit 96c8343e46
7 changed files with 36 additions and 5 deletions

View file

@ -1235,6 +1235,16 @@ config BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY
Bluedroid will report adv data or scan response to application layer immediately.
# Memory reserved at start of DRAM for Bluetooth stack
config BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT
int "Timeout of BLE connection establishment"
depends on BLUEDROID_ENABLED
range 1 60
default 30
help
Bluetooth Connection establishment maximum time, if connection time exceeds this value, the connection
establishment fails, ESP_GATTC_OPEN_EVT or ESP_GATTS_OPEN_EVT is triggered.
config BT_RESERVE_DRAM
hex
default 0xdb5c if BT_ENABLED

View file

@ -690,10 +690,13 @@ void btc_gatts_call_handler(btc_msg_t *msg)
#else
//BTA_DmAddBleDevice(p_cb->bd_addr.address, addr_type, device_type);
#endif
/*
not support background connection
// Mark background connections
if (!arg->open.is_direct) {
BTA_DmBleSetBgConnType(BTM_BLE_CONN_AUTO, NULL);
}
*/
transport = BTA_GATT_TRANSPORT_LE;

View file

@ -163,6 +163,12 @@
#define GATT_MAX_PHY_CHANNEL CONFIG_BT_ACL_CONNECTIONS
#endif /* CONFIG_BT_ACL_CONNECTIONS */
#if(CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT)
#define BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT
#else
#define BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT 30
#endif
//------------------Added from bdroid_buildcfg.h---------------------
#ifndef L2CAP_EXTFEA_SUPPORTED_MASK
#define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS)

View file

@ -2006,9 +2006,18 @@ void btm_ble_conn_complete(UINT8 *p, UINT16 evt_len, BOOLEAN enhanced)
btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, TRUE);
#endif
}
}
btm_ble_update_mode_operation(role, bda, status);
BOOLEAN bg_con = btm_ble_update_mode_operation(role, bda, status);
if (status != HCI_SUCCESS && !bg_con) {
// notify connection failed
l2c_link_hci_disc_comp (handle, status);
#if (SMP_INCLUDED == TRUE)
/* Notify security manager */
btm_sec_disconnected (handle, status);
#endif ///SMP_INCLUDED == TRUE
}
}

View file

@ -4142,8 +4142,9 @@ void btm_ble_update_link_topology_mask(UINT8 link_role, BOOLEAN increase)
** Returns void
**
*******************************************************************************/
void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bd_addr, UINT8 status)
BOOLEAN btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bd_addr, UINT8 status)
{
BOOLEAN bg_con = FALSE;
if (status == HCI_ERR_DIRECTED_ADVERTISING_TIMEOUT) {
btm_cb.ble_ctr_cb.inq_var.adv_mode = BTM_BLE_ADV_DISABLE;
/* make device fall back into undirected adv mode by default */
@ -4162,8 +4163,10 @@ void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bd_addr, UINT8 statu
now in order */
if (btm_ble_get_conn_st() == BLE_CONN_IDLE && status != HCI_ERR_HOST_REJECT_RESOURCES &&
!btm_send_pending_direct_conn()) {
btm_ble_resume_bg_conn();
bg_con = btm_ble_resume_bg_conn();
}
return bg_con;
}
/*******************************************************************************

View file

@ -449,7 +449,7 @@ BOOLEAN btm_ble_start_auto_conn(BOOLEAN start);
BOOLEAN btm_ble_start_select_conn(BOOLEAN start, tBTM_BLE_SEL_CBACK *p_select_cback);
BOOLEAN btm_ble_renew_bg_conn_params(BOOLEAN add, BD_ADDR bd_addr);
void btm_write_dir_conn_wl(BD_ADDR target_addr);
void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bda, UINT8 status);
BOOLEAN btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bda, UINT8 status);
BOOLEAN btm_execute_wl_dev_operation(void);
void btm_ble_update_link_topology_mask(UINT8 role, BOOLEAN increase);

View file

@ -66,7 +66,7 @@
#define L2CAP_WAIT_UNPARK_TOUT 2 /* 2 seconds */
#define L2CAP_LINK_INFO_RESP_TOUT 2 /* 2 seconds */
#define L2CAP_UPDATE_CONN_PARAM_TOUT 6 /* 6 seconds */
#define L2CAP_BLE_LINK_CONNECT_TOUT 30 /* 30 seconds */
#define L2CAP_BLE_LINK_CONNECT_TOUT BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT // configed in menuconfig
#define L2CAP_BLE_CONN_PARAM_UPD_TOUT 30 /* 30 seconds */
/* quick timer uses millisecond unit */