Added / corrected README files for the SPI master / slave examples under peripherals

This commit is contained in:
krzychb 2018-03-08 10:34:55 +01:00
parent 53e01bfb96
commit 691b2ad8f3
2 changed files with 14 additions and 16 deletions

View file

@ -0,0 +1,5 @@
## SPI master example
This code displays a simple graphics with varying pixel colors on the 320x240 LCD on an ESP-WROVER-KIT board.
If you like to adopt this example to another type of display or pinout, check [manin/spi_master_example_main.c] for comments that explain some of implementation details.

View file

@ -1,22 +1,15 @@
## SPI slave example
These two projects illustrate the SPI Slave driver. They're supposed to be flashed into two separate ESP32s connected to
eachother using the SPI pins defined in app_main.c. Once connected and flashed, they will use the spi master and spi slave
driver to communicate with eachother. The example also includes a handshaking line to allow the master to only poll the
slave when it is actually ready to parse a transaction.
These two projects illustrate the SPI Slave driver. They're supposed to be flashed into two separate ESP32s connected to eachother using the SPI pins defined in app_main.c. Once connected and flashed, they will use the spi master and spi slave driver to communicate with eachother. The example also includes a handshaking line to allow the master to only poll the slave when it is actually ready to parse a transaction.
Please run wires between the following GPIOs between the slave and master to make the example function:
========= ====== =======
Signal Slave Master
========= ====== =======
Handshake GPIO2 GPIO2
MOSI GPIO12 GPIO12
MISO GPIO13 GPIO13
SCLK GPIO15 GPIO15
CS GPIO14 GPIO14
========= ====== =======
| Signal | Slave | Master |
|-----------|--------|--------|
| Handshake | GPIO2 | GPIO2 |
| MOSI | GPIO12 | GPIO12 |
| MISO | GPIO13 | GPIO13 |
| SCLK | GPIO15 | GPIO15 |
| CS | GPIO14 | GPIO14 |
Be aware that the example by default uses lines normally reserved for JTAG. If this is an issue, either because of hardwired
JTAG hardware or because of the need to do JTAG debugging, feel free to change the GPIO settings by editing defines in the top
of main.c in the master/slave source code.
Be aware that the example by default uses lines normally reserved for JTAG. If this is an issue, either because of hardwired JTAG hardware or because of the need to do JTAG debugging, feel free to change the GPIO settings by editing defines in the top of main.c in the master/slave source code.