Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

docs: Replaced 'attenuaton' with 'attenuation'

Browse source
This commit is contained in:
Krzysztof Budzynski 2019-11-18 12:10:55 +08:00
parent fb3d648e07
commit 1487bd2edd
1 changed files with 37 additions and 37 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

74
components/driver/include/driver/adc.h
View file

@ -34,10 +34,10 @@ typedef enum {
} adc_atten_t;
typedef enum {
ADC_WIDTH_BIT_9 = 0, /*!< ADC capture width is 9Bit*/
ADC_WIDTH_BIT_10 = 1, /*!< ADC capture width is 10Bit*/
ADC_WIDTH_BIT_11 = 2, /*!< ADC capture width is 11Bit*/
ADC_WIDTH_BIT_12 = 3, /*!< ADC capture width is 12Bit*/
ADC_WIDTH_BIT_9 = 0, /*!< ADC capture width is 9 bits*/
ADC_WIDTH_BIT_10 = 1, /*!< ADC capture width is 10 bits*/
ADC_WIDTH_BIT_11 = 2, /*!< ADC capture width is 11 bits*/
ADC_WIDTH_BIT_12 = 3, /*!< ADC capture width is 12 bits*/
ADC_WIDTH_MAX,
} adc_bits_width_t;
@ -119,15 +119,15 @@ typedef enum {
} adc_i2s_source_t;
/**
* @brief Get the gpio number of a specific ADC1 channel.
* @brief Get the GPIO number of a specific ADC1 channel.
*
* @param channel Channel to get the gpio number
* @param channel Channel to get the GPIO number
*
* @param gpio_num output buffer to hold the gpio number
* @param gpio_num output buffer to hold the GPIO number
*
* @return
* - ESP_OK if success
* - ESP_ERR_INVALID_ARG if channal not valid
* - ESP_ERR_INVALID_ARG if channel not valid
*/
esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num);
@ -163,27 +163,27 @@ esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t width_bit);
* ADC channels simultaneously. adc1_get_raw() can then be called for any configured
* channel.
*
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
* The default ADC full-scale voltage is 1.1 V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3 V) requires setting >0 dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3V:
* When VDD_A is 3.3 V:
*
* - 0dB attenuaton (ADC_ATTEN_DB_0) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9V (see note below)
* - 0 dB attenuation (ADC_ATTEN_DB_0) gives full-scale voltage 1.1 V
* - 2.5 dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5 V
* - 6 dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2 V
* - 11 dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9 V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured
* bit width, this value is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
*
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
* @note At 11 dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
*
* Due to ADC characteristics, most accurate results are obtained within the following approximate voltage ranges:
*
* - 0dB attenuaton (ADC_ATTEN_DB_0) between 100 and 950mV
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) between 100 and 1250mV
* - 6dB attenuation (ADC_ATTEN_DB_6) between 150 to 1750mV
* - 11dB attenuation (ADC_ATTEN_DB_11) between 150 to 2450mV
* - 0 dB attenuation (ADC_ATTEN_DB_0) between 100 and 950 mV
* - 2.5 dB attenuation (ADC_ATTEN_DB_2_5) between 100 and 1250 mV
* - 6 dB attenuation (ADC_ATTEN_DB_6) between 150 to 1750 mV
* - 11 dB attenuation (ADC_ATTEN_DB_11) between 150 to 2450 mV
*
* For maximum accuracy, use the ADC calibration APIs and measure voltages within these recommended ranges.
*
@ -308,15 +308,15 @@ void adc1_ulp_enable(void);
int hall_sensor_read(void);
/**
* @brief Get the gpio number of a specific ADC2 channel.
* @brief Get the GPIO number of a specific ADC2 channel.
*
* @param channel Channel to get the gpio number
* @param channel Channel to get the GPIO number
*
* @param gpio_num output buffer to hold the gpio number
* @param gpio_num output buffer to hold the GPIO number
*
* @return
* - ESP_OK if success
* - ESP_ERR_INVALID_ARG if channal not valid
* - ESP_ERR_INVALID_ARG if channel not valid
*/
esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
@ -327,21 +327,21 @@ esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
* connect it to the ADC2 channel. It must be called before calling
* ``adc2_get_raw()`` for this channel.
*
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
* The default ADC full-scale voltage is 1.1 V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3 V) requires setting >0 dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3V:
* When VDD_A is 3.3 V:
*
* - 0dB attenuaton (ADC_ATTEN_0db) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_6db) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_11db) gives full-scale voltage 3.9V (see note below)
* - 0 dB attenuation (ADC_ATTEN_0db) gives full-scale voltage 1.1 V
* - 2.5 dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5 V
* - 6 dB attenuation (ADC_ATTEN_6db) gives full-scale voltage 2.2 V
* - 11 dB attenuation (ADC_ATTEN_11db) gives full-scale voltage 3.9 V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading
* (depending on ADC2 configured bit width, this value is: 4095 for 12-bits, 2047
* for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
*
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
* @note At 11 dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
*
* @param channel ADC2 channel to configure
* @param atten Attenuation level
@ -377,18 +377,18 @@ esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
esp_err_t adc2_get_raw(adc2_channel_t channel, adc_bits_width_t width_bit, int* raw_out);
/**
* @brief Output ADC2 reference voltage to gpio 25 or 26 or 27
* @brief Output ADC2 reference voltage to GPIO 25 or 26 or 27
*
* This function utilizes the testing mux exclusive to ADC 2 to route the
* reference voltage one of ADC2's channels. Supported gpios are gpios
* reference voltage one of ADC2's channels. Supported GPIOs are GPIOs
* 25, 26, and 27. This refernce voltage can be manually read from the pin
* and used in the esp_adc_cal component.
*
* @param[in] gpio GPIO number (gpios 25,26,27 supported)
* @param[in] gpio GPIO number (GPIOs 25, 26 and 27 are supported)
*
* @return
* - ESP_OK: v_ref successfully routed to selected gpio
* - ESP_ERR_INVALID_ARG: Unsupported gpio
* - ESP_OK: v_ref successfully routed to selected GPIO
* - ESP_ERR_INVALID_ARG: Unsupported GPIO
*/
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio);