Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge branch 'bugfix/eth_gpio0_output_v3.2' into 'release/v3.2'

Browse source 
ethernet cleanup && support GPIO0 output mode && support IP101(backport v3.2)

See merge request idf/esp-idf!4214
This commit is contained in:
Angus Gratton 2019-02-12 07:54:57 +08:00
commit 1444868917
22 changed files with 650 additions and 407 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
components/ethernet/CMakeLists.txt
View file

@ -2,7 +2,8 @@ set(COMPONENT_SRCS "emac_dev.c"
"emac_main.c"
"eth_phy/phy_common.c"
"eth_phy/phy_lan8720.c"
"eth_phy/phy_tlk110.c")
"eth_phy/phy_tlk110.c"
"eth_phy/phy_ip101.c")
set(COMPONENT_ADD_INCLUDEDIRS "include")
set(COMPONENT_REQUIRES)

95
components/ethernet/Kconfig
View file

@ -1,60 +1,55 @@
menu Ethernet
config DMA_RX_BUF_NUM
int "Number of DMA RX buffers"
range 3 20
default 10
help
Number of DMA receive buffers. Each buffer is 1600 bytes.
Buffers are allocated statically.
Larger number of buffers increases throughput.
If enable flow ctrl, the num must be above 9 .
config DMA_RX_BUF_NUM
int "Number of DMA RX buffers"
range 3 20
default 10
help
Number of DMA receive buffers. Each buffer is 1600 bytes.
These buffers are allocated dynamically.
More buffers will increase throughput.
If flow ctrl is enabled, make sure this number is larger than 9.
config DMA_TX_BUF_NUM
int "Number of DMA TX buffers"
range 3 20
default 10
help
Number of DMA transmit buffers. Each buffer is 1600 bytes.
Buffers are allocated statically.
Larger number of buffers increases throughput.
config DMA_TX_BUF_NUM
int "Number of DMA TX buffers"
range 3 20
default 10
help
Number of DMA transmit buffers. Each buffer is 1600 bytes.
These buffers are allocated dynamically.
More buffers will increase throughput.
config EMAC_L2_TO_L3_RX_BUF_MODE
bool "Enable copy between Layer2 and Layer3"
default y
help
If this options is selected, a copy of each received buffer will be created when
passing it from the Ethernet MAC (L2) to the IP stack (L3). Otherwise, IP stack
will receive pointers to the DMA buffers used by Ethernet MAC.
config EMAC_L2_TO_L3_RX_BUF_MODE
bool "Enable received buffers be copied to Layer3 from Layer2"
default y
help
If this option is selected, a copy of each received buffer will be allocated from the heap
before passing it to the IP Layer (L3).
Which means, the total amount of received buffers is limited by the heap size.
When Ethernet MAC doesn't have any unused buffers left, it will drop incoming
packets (flow control may help with this problem, to some extent).
If this option is not selected, IP layer only uses the pointers to the DMA buffers owned by Ethernet MAC.
When Ethernet MAC doesn't have any available buffers left, it will drop the incoming packets.
The buffers for the IP stack are allocated from the heap, so the total number of
receive buffers is limited by the available heap size, if this option is selected.
config EMAC_CHECK_LINK_PERIOD_MS
int "Period (ms) of checking Ethernet linkup status"
range 1000 5000
default 2000
help
The emac driver uses an internal timer to check the Ethernet linkup status.
Here you should choose a valid interval time.
If unsure, choose n.
config EMAC_TASK_PRIORITY
int "EMAC_TASK_PRIORITY"
default 20
range 3 22
help
Priority of Ethernet MAC task.
config EMAC_CHECK_LINK_PERIOD_MS
int "Period(ms) of checking Ethernet linkup status"
range 1000 5000
default 2000
help
The emac driver uses an internal timer to check the ethernet linkup
status. Here you should choose a valid the interval time.
config EMAC_TASK_PRIORITY
int "EMAC_TASK_PRIORITY"
default 20
range 3 22
help
Ethernet MAC task priority.
config EMAC_TASK_STACK_SIZE
int "Stack Size of EMAC Task"
default 3072
range 2000 8000
help
Stack Size of Ethernet MAC task.
config EMAC_TASK_STACK_SIZE
int "Stack Size of EMAC Task"
default 3072
range 2000 8000
help
Stack Size of Ethernet MAC task.
endmenu

21
components/ethernet/emac_common.h
View file

@ -15,16 +15,13 @@
#ifndef _EMAC_COMMON_H_
#define _EMAC_COMMON_H_
#include <stdint.h>
#include "esp_err.h"
#include "emac_dev.h"
#include "esp_eth.h"
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_eth.h"
#include "emac_dev.h"
typedef uint32_t emac_sig_t;
typedef uint32_t emac_par_t;
@ -75,8 +72,8 @@ struct emac_config_data {
eth_phy_get_duplex_mode_func emac_phy_get_duplex_mode;
bool emac_flow_ctrl_enable;
bool emac_flow_ctrl_partner_support;
eth_phy_get_partner_pause_enable_func emac_phy_get_partner_pause_enable;
eth_phy_power_enable_func emac_phy_power_enable;
eth_phy_get_partner_pause_enable_func emac_phy_get_partner_pause_enable;
eth_phy_power_enable_func emac_phy_power_enable;
uint32_t reset_timeout_ms;
};
@ -107,17 +104,15 @@ struct emac_close_cmd {
#define DMA_RX_BUF_NUM CONFIG_DMA_RX_BUF_NUM
#define DMA_TX_BUF_NUM CONFIG_DMA_TX_BUF_NUM
#define EMAC_TASK_PRIORITY CONFIG_EMAC_TASK_PRIORITY
#define EMAC_TASK_STACK_SIZE CONFIG_EMAC_TASK_STACK_SIZE
#define EMAC_TASK_STACK_SIZE CONFIG_EMAC_TASK_STACK_SIZE
#define DMA_RX_BUF_SIZE 1600
#define DMA_TX_BUF_SIZE 1600
//rest buf num
#define FLOW_CONTROL_HIGH_WATERMARK 3
//used buf num
#define FLOW_CONTROL_LOW_WATERMARK 6
#define FLOW_CONTROL_LOW_WATERMARK 6
#define PHY_LINK_CHECK_NUM 5
#define PHY_LINK_CHECK_NUM 5
#define EMAC_CMD_OK 0
#define EMAC_CMD_FAIL -1

4
components/ethernet/emac_desc.h
View file

@ -15,12 +15,12 @@
#ifndef _EMAC_DESC_H_
#define _EMAC_DESC_H_
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
#include "soc/soc.h"
#define REG_EMAC_DESC_BASE 0
#define EMAC_DESC_TDES0_REG (REG_EMAC_DESC_BASE + 0x0000)
#define EMAC_DESC_TX_OWN (BIT(31))

8
components/ethernet/emac_dev.h
View file

@ -15,13 +15,13 @@
#ifndef _EMAC_DEV_H_
#define _EMAC_DEV_H_
#include <stdint.h>
#include "soc/emac_reg_v2.h"
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_types.h"
#include "soc/emac_reg_v2.h"
#define EMAC_INTR_ENABLE_BIT (EMAC_DMAIN_TIE | EMAC_DMAIN_RIE | EMAC_DMAIN_RBUE | EMAC_DMAIN_NISE)
struct dma_desc {
@ -37,7 +37,7 @@ typedef struct dma_extended_desc {
uint32_t desc5;
uint32_t desc6;
uint32_t desc7;
}dma_extended_desc_t;
} dma_extended_desc_t;
void emac_enable_clk(bool enable);
esp_err_t emac_reset(void);

6
components/ethernet/emac_main.c
View file

@ -1121,7 +1121,11 @@ esp_err_t esp_eth_init_internal(eth_config_t *config)
REG_SET_FIELD(EMAC_EX_CLKOUT_CONF_REG, EMAC_EX_CLK_OUT_H_DIV_NUM, 0);
REG_SET_FIELD(EMAC_EX_CLKOUT_CONF_REG, EMAC_EX_CLK_OUT_DIV_NUM, 0);
if (emac_config.clock_mode == ETH_CLOCK_GPIO16_OUT) {
if (emac_config.clock_mode == ETH_CLOCK_GPIO0_OUT) {
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0_CLK_OUT1);
REG_WRITE(PIN_CTRL, 6);
ESP_LOGD(TAG, "EMAC 50MHz clock output on GPIO0");
} else if (emac_config.clock_mode == ETH_CLOCK_GPIO16_OUT) {
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO16_U, FUNC_GPIO16_EMAC_CLK_OUT);
ESP_LOGD(TAG, "EMAC 50MHz clock output on GPIO16");
} else if (emac_config.clock_mode == ETH_CLOCK_GPIO17_OUT) {

3
components/ethernet/eth_phy/phy_common.c
View file

@ -23,7 +23,6 @@ void phy_rmii_configure_data_interface_pins(void)
{
// CRS_DRV to GPIO27
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO27_U, FUNC_GPIO27_EMAC_RX_DV);
// TXD0 to GPIO19
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO19_U, FUNC_GPIO19_EMAC_TXD0);
// TX_EN to GPIO21
@ -71,7 +70,7 @@ bool phy_mii_check_link_status(void)
bool phy_mii_get_partner_pause_enable(void)
{
if((esp_eth_smi_read(MII_PHY_LINK_PARTNER_ABILITY_REG) & MII_PARTNER_PAUSE)) {
if ((esp_eth_smi_read(MII_PHY_LINK_PARTNER_ABILITY_REG) & MII_PARTNER_PAUSE)) {
ESP_LOGD(TAG, "phy_mii_get_partner_pause_enable(TRUE)");
return true;
} else {

116
components/ethernet/eth_phy/phy_ip101.c Normal file
View file

@ -0,0 +1,116 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp_log.h"
#include "esp_eth.h"
#include "eth_phy/phy_reg.h"
#include "eth_phy/phy_ip101.h"
#define IP101_PHY_ID1 0x243
#define IP101_PHY_ID2 0xc54
#define IP101_PHY_ID2_MASK 0xFFF0
#define PHY_STATUS_REG (0x1e)
#define DUPLEX_STATUS BIT(2)
#define SPEED_STATUS BIT(1)
static const char *TAG = "ip101";
void phy_ip101_check_phy_init(void)
{
phy_ip101_dump_registers();
esp_eth_smi_wait_set(MII_BASIC_MODE_STATUS_REG, MII_AUTO_NEGOTIATION_COMPLETE, 0);
}
eth_speed_mode_t phy_ip101_get_speed_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & SPEED_STATUS) == SPEED_STATUS) {
ESP_LOGD(TAG, "phy_ip101_get_speed_mode(100)");
return ETH_SPEED_MODE_100M;
} else {
ESP_LOGD(TAG, "phy_ip101_get_speed_mode(10)");
return ETH_SPEED_MODE_10M;
}
}
eth_duplex_mode_t phy_ip101_get_duplex_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & DUPLEX_STATUS) == DUPLEX_STATUS) {
ESP_LOGD(TAG, "phy_ip101_get_duplex_mode(FULL)");
return ETH_MODE_FULLDUPLEX;
} else {
ESP_LOGD(TAG, "phy_ip101_get_duplex_mode(HALF)");
return ETH_MODE_HALFDUPLEX;
}
}
void phy_ip101_power_enable(bool enable)
{
if (enable) {
uint32_t data = esp_eth_smi_read(MII_BASIC_MODE_CONTROL_REG);
data |= MII_AUTO_NEGOTIATION_ENABLE | MII_RESTART_AUTO_NEGOTIATION;
esp_eth_smi_write(MII_BASIC_MODE_CONTROL_REG, data);
// TODO: only do this if config.flow_ctrl_enable == true
phy_mii_enable_flow_ctrl();
}
}
esp_err_t phy_ip101_init(void)
{
esp_err_t res1, res2;
ESP_LOGD(TAG, "phy_ip101_init()");
phy_ip101_dump_registers();
do {
// Call esp_eth_smi_wait_value() with a timeout so it prints an error periodically
res1 = esp_eth_smi_wait_value(MII_PHY_IDENTIFIER_1_REG, IP101_PHY_ID1, UINT16_MAX, 1000);
res2 = esp_eth_smi_wait_value(MII_PHY_IDENTIFIER_2_REG, IP101_PHY_ID2, IP101_PHY_ID2_MASK, 1000);
} while (res1 != ESP_OK || res2 != ESP_OK);
ets_delay_us(300);
// TODO: only do this if config.flow_ctrl_enable == true
phy_mii_enable_flow_ctrl();
if (res1 == ESP_OK && res2 == ESP_OK) {
return ESP_OK;
} else {
return ESP_ERR_TIMEOUT;
}
}
const eth_config_t phy_ip101_default_ethernet_config = {
.phy_addr = 0x1,
.mac_mode = ETH_MODE_RMII,
.clock_mode = ETH_CLOCK_GPIO0_OUT,
.flow_ctrl_enable = true,
.phy_init = phy_ip101_init,
.phy_check_init = phy_ip101_check_phy_init,
.phy_check_link = phy_mii_check_link_status,
.phy_get_speed_mode = phy_ip101_get_speed_mode,
.phy_get_duplex_mode = phy_ip101_get_duplex_mode,
.phy_get_partner_pause_enable = phy_mii_get_partner_pause_enable,
.phy_power_enable = phy_ip101_power_enable,
};
void phy_ip101_dump_registers()
{
ESP_LOGD(TAG, "IP101 Registers:");
ESP_LOGD(TAG, "BCR 0x%04x", esp_eth_smi_read(0x0));
ESP_LOGD(TAG, "BSR 0x%04x", esp_eth_smi_read(0x1));
ESP_LOGD(TAG, "PHY1 0x%04x", esp_eth_smi_read(0x2));
ESP_LOGD(TAG, "PHY2 0x%04x", esp_eth_smi_read(0x3));
ESP_LOGD(TAG, "ANAR 0x%04x", esp_eth_smi_read(0x4));
ESP_LOGD(TAG, "ANLPAR 0x%04x", esp_eth_smi_read(0x5));
ESP_LOGD(TAG, "ANER 0x%04x", esp_eth_smi_read(0x6));
ESP_LOGD(TAG, "PSCR 0x%04x", esp_eth_smi_read(0x16));
ESP_LOGD(TAG, "ISR 0x%04x", esp_eth_smi_read(0x17));
ESP_LOGD(TAG, "ICR 0x%04x", esp_eth_smi_read(0x18));
ESP_LOGD(TAG, "CSSR 0x%04x", esp_eth_smi_read(0x30));
}

30
components/ethernet/eth_phy/phy_lan8720.c
View file

@ -11,31 +11,25 @@
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_eth.h"
#include "eth_phy/phy_lan8720.h"
#include "eth_phy/phy_reg.h"
#include "eth_phy/phy_lan8720.h"
/* Value of MII_PHY_IDENTIFIER_REGs for Microchip LAN8720
* (Except for bottom 4 bits of ID2, used for model revision)
*/
#define LAN8720_PHY_ID1 0x0007
#define LAN8720_PHY_ID2 0xc0f0
#define LAN8720_PHY_ID2_MASK 0xFFF0
/* LAN8720-specific registers */
#define PHY_SPECIAL_CONTROL_STATUS_REG (0x1f)
#define AUTO_NEGOTIATION_DONE BIT(12)
#define DUPLEX_INDICATION_FULL BIT(4)
#define SPEED_INDICATION_100T BIT(3)
#define SPEED_INDICATION_10T BIT(2)
#define SPEED_DUPLEX_INDICATION_10T_HALF 0x04
#define SPEED_DUPLEX_INDICATION_10T_FULL 0x14
#define SPEED_DUPLEX_INDICATION_100T_HALF 0x08
#define SPEED_DUPLEX_INDICATION_100T_FULL 0x18
#define PHY_SPECIAL_CONTROL_STATUS_REG (0x1f)
#define AUTO_NEGOTIATION_DONE BIT(12)
#define DUPLEX_INDICATION_FULL BIT(4)
#define SPEED_INDICATION_100T BIT(3)
#define SPEED_INDICATION_10T BIT(2)
#define SPEED_DUPLEX_INDICATION_10T_HALF 0x04
#define SPEED_DUPLEX_INDICATION_10T_FULL 0x14
#define SPEED_DUPLEX_INDICATION_100T_HALF 0x08
#define SPEED_DUPLEX_INDICATION_100T_FULL 0x18
static const char *TAG = "lan8720";
@ -109,13 +103,9 @@ esp_err_t phy_lan8720_init(void)
}
const eth_config_t phy_lan8720_default_ethernet_config = {
// By default, the PHY address is 0 or 1 based on PHYAD0
// pin. Can also be overriden in software. See datasheet
// for defaults.
.phy_addr = 0,
.mac_mode = ETH_MODE_RMII,
.clock_mode = ETH_CLOCK_GPIO0_IN,
//Only FULLDUPLEX mode support flow ctrl now!
.flow_ctrl_enable = true,
.phy_init = phy_lan8720_init,
.phy_check_init = phy_lan8720_check_phy_init,

51
components/ethernet/eth_phy/phy_tlk110.c
View file

@ -11,45 +11,37 @@
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_eth.h"
#include "eth_phy/phy_tlk110.h"
#include "eth_phy/phy_reg.h"
#include "eth_phy/phy_tlk110.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
/* Value of MII_PHY_IDENTIFIER_REG for TI TLK110,
Excluding bottom 4 bytes of ID2, used for model revision
*/
#define TLK110_PHY_ID1 0x2000
#define TLK110_PHY_ID2 0xa210
#define TLK110_PHY_ID2_MASK 0xFFF0
/* TLK110-specific registers */
#define SW_STRAP_CONTROL_REG (0x9)
#define SW_STRAP_CONFIG_DONE BIT(15)
#define AUTO_MDIX_ENABLE BIT(14)
#define AUTO_NEGOTIATION_ENABLE BIT(13)
#define AN_1 BIT(12)
#define AN_0 BIT(11)
#define LED_CFG BIT(10)
#define RMII_ENHANCED_MODE BIT(9)
#define SW_STRAP_CONTROL_REG (0x9)
#define SW_STRAP_CONFIG_DONE BIT(15)
#define AUTO_MDIX_ENABLE BIT(14)
#define AUTO_NEGOTIATION_ENABLE BIT(13)
#define AN_1 BIT(12)
#define AN_0 BIT(11)
#define LED_CFG BIT(10)
#define RMII_ENHANCED_MODE BIT(9)
#define DEFAULT_STRAP_CONFIG (AUTO_MDIX_ENABLE|AUTO_NEGOTIATION_ENABLE|AN_1|AN_0|LED_CFG)
#define DEFAULT_STRAP_CONFIG (AUTO_MDIX_ENABLE | AUTO_NEGOTIATION_ENABLE | AN_1 | AN_0 | LED_CFG)
#define PHY_STATUS_REG (0x10)
#define AUTO_NEGOTIATION_STATUS BIT(4)
#define DUPLEX_STATUS BIT(2)
#define SPEED_STATUS BIT(1)
#define PHY_STATUS_REG (0x10)
#define AUTO_NEGOTIATION_STATUS BIT(4)
#define DUPLEX_STATUS BIT(2)
#define SPEED_STATUS BIT(1)
#define CABLE_DIAGNOSTIC_CONTROL_REG (0x1e)
#define DIAGNOSTIC_DONE BIT(1)
#define CABLE_DIAGNOSTIC_CONTROL_REG (0x1e)
#define DIAGNOSTIC_DONE BIT(1)
#define PHY_RESET_CONTROL_REG (0x1f)
#define SOFTWARE_RESET BIT(15)
#define PHY_RESET_CONTROL_REG (0x1f)
#define SOFTWARE_RESET BIT(15)
static const char *TAG = "tlk110";
@ -64,7 +56,7 @@ void phy_tlk110_check_phy_init(void)
eth_speed_mode_t phy_tlk110_get_speed_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & SPEED_STATUS ) != SPEED_STATUS) {
if ((esp_eth_smi_read(PHY_STATUS_REG) & SPEED_STATUS) != SPEED_STATUS) {
ESP_LOGD(TAG, "phy_tlk110_get_speed_mode(100)");
return ETH_SPEED_MODE_100M;
} else {
@ -75,7 +67,7 @@ eth_speed_mode_t phy_tlk110_get_speed_mode(void)
eth_duplex_mode_t phy_tlk110_get_duplex_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & DUPLEX_STATUS ) == DUPLEX_STATUS) {
if ((esp_eth_smi_read(PHY_STATUS_REG) & DUPLEX_STATUS) == DUPLEX_STATUS) {
ESP_LOGD(TAG, "phy_tlk110_get_duplex_mode(FULL)");
return ETH_MODE_FULLDUPLEX;
} else {
@ -122,12 +114,9 @@ esp_err_t phy_tlk110_init(void)
}
const eth_config_t phy_tlk110_default_ethernet_config = {
// PHY address configured by PHYADx pins. Default value of 0x1
// is used if all pins are unconnected.
.phy_addr = 0x1,
.mac_mode = ETH_MODE_RMII,
.clock_mode = ETH_CLOCK_GPIO0_IN,
//Only FULLDUPLEX mode support flow ctrl now!
.flow_ctrl_enable = true,
.phy_init = phy_tlk110_init,
.phy_check_init = phy_tlk110_check_phy_init,

128
components/ethernet/include/esp_eth.h
View file

@ -15,68 +15,88 @@
#ifndef __ESP_ETH_H__
#define __ESP_ETH_H__
#include <stdbool.h>
#include <stdint.h>
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_types.h"
#include "esp_err.h"
/**
* @brief Ethernet interface mode
*
*/
typedef enum {
ETH_MODE_RMII = 0,
ETH_MODE_MII,
ETH_MODE_RMII = 0, /*!< RMII mode */
ETH_MODE_MII, /*!< MII mode */
} eth_mode_t;
/**
* @brief Ethernet clock mode
*
*/
typedef enum {
ETH_CLOCK_GPIO0_IN = 0,
ETH_CLOCK_GPIO16_OUT = 2,
ETH_CLOCK_GPIO17_OUT = 3
ETH_CLOCK_GPIO0_IN = 0, /*!< RMII clock input to GPIO0 */
ETH_CLOCK_GPIO0_OUT = 1, /*!< RMII clock output from GPIO0 */
ETH_CLOCK_GPIO16_OUT = 2, /*!< RMII clock output from GPIO16 */
ETH_CLOCK_GPIO17_OUT = 3 /*!< RMII clock output from GPIO17 */
} eth_clock_mode_t;
/**
* @brief Ethernet Speed
*
*/
typedef enum {
ETH_SPEED_MODE_10M = 0,
ETH_SPEED_MODE_100M,
ETH_SPEED_MODE_10M = 0, /*!< Ethernet speed: 10Mbps */
ETH_SPEED_MODE_100M, /*!< Ethernet speed: 100Mbps */
} eth_speed_mode_t;
/**
* @brief Ethernet Duplex
*
*/
typedef enum {
ETH_MODE_HALFDUPLEX = 0,
ETH_MODE_FULLDUPLEX,
ETH_MODE_HALFDUPLEX = 0, /*!< Ethernet half duplex */
ETH_MODE_FULLDUPLEX, /*!< Ethernet full duplex */
} eth_duplex_mode_t;
/**
* @brief Ethernet PHY address
*
*/
typedef enum {
PHY0 = 0,
PHY1,
PHY2,
PHY3,
PHY4,
PHY5,
PHY6,
PHY7,
PHY8,
PHY9,
PHY10,
PHY11,
PHY12,
PHY13,
PHY14,
PHY15,
PHY16,
PHY17,
PHY18,
PHY19,
PHY20,
PHY21,
PHY22,
PHY23,
PHY24,
PHY25,
PHY26,
PHY27,
PHY28,
PHY29,
PHY30,
PHY31,
PHY0 = 0, /*!< PHY address 0 */
PHY1, /*!< PHY address 1 */
PHY2, /*!< PHY address 2 */
PHY3, /*!< PHY address 3 */
PHY4, /*!< PHY address 4 */
PHY5, /*!< PHY address 5 */
PHY6, /*!< PHY address 6 */
PHY7, /*!< PHY address 7 */
PHY8, /*!< PHY address 8 */
PHY9, /*!< PHY address 9 */
PHY10, /*!< PHY address 10 */
PHY11, /*!< PHY address 11 */
PHY12, /*!< PHY address 12 */
PHY13, /*!< PHY address 13 */
PHY14, /*!< PHY address 14 */
PHY15, /*!< PHY address 15 */
PHY16, /*!< PHY address 16 */
PHY17, /*!< PHY address 17 */
PHY18, /*!< PHY address 18 */
PHY19, /*!< PHY address 19 */
PHY20, /*!< PHY address 20 */
PHY21, /*!< PHY address 21 */
PHY22, /*!< PHY address 22 */
PHY23, /*!< PHY address 23 */
PHY24, /*!< PHY address 24 */
PHY25, /*!< PHY address 25 */
PHY26, /*!< PHY address 26 */
PHY27, /*!< PHY address 27 */
PHY28, /*!< PHY address 28 */
PHY29, /*!< PHY address 29 */
PHY30, /*!< PHY address 30 */
PHY31 /*!< PHY address 31 */
} eth_phy_base_t;
typedef bool (*eth_phy_check_link_func)(void);
@ -94,15 +114,15 @@ typedef void (*eth_phy_power_enable_func)(bool enable);
*
*/
typedef struct {
eth_phy_base_t phy_addr; /*!< phy base addr (0~31) */
eth_mode_t mac_mode; /*!< mac mode only support RMII now */
eth_clock_mode_t clock_mode; /*!< external/internal clock mode selecton */
eth_tcpip_input_func tcpip_input; /*!< tcpip input func */
eth_phy_func phy_init; /*!< phy init func */
eth_phy_check_link_func phy_check_link; /*!< phy check link func */
eth_phy_check_init_func phy_check_init; /*!< phy check init func */
eth_phy_get_speed_mode_func phy_get_speed_mode; /*!< phy check init func */
eth_phy_get_duplex_mode_func phy_get_duplex_mode; /*!< phy check init func */
eth_phy_base_t phy_addr; /*!< PHY address (0~31) */
eth_mode_t mac_mode; /*!< MAC mode: only support RMII now */
eth_clock_mode_t clock_mode; /*!< external/internal clock mode selection */
eth_tcpip_input_func tcpip_input; /*!< tcpip input func */
eth_phy_func phy_init; /*!< phy init func */
eth_phy_check_link_func phy_check_link; /*!< phy check link func */
eth_phy_check_init_func phy_check_init; /*!< phy check init func */
eth_phy_get_speed_mode_func phy_get_speed_mode; /*!< phy check init func */
eth_phy_get_duplex_mode_func phy_get_duplex_mode; /*!< phy check init func */
eth_gpio_config_func gpio_config; /*!< gpio config func */
bool flow_ctrl_enable; /*!< flag of flow ctrl enable */
eth_phy_get_partner_pause_enable_func phy_get_partner_pause_enable; /*!< get partner pause enable */

59
components/ethernet/include/eth_phy/phy.h
View file

@ -20,38 +20,55 @@ extern "C" {
#include "esp_eth.h"
/** Common PHY-management functions.
/**
* @brief Common PHY-management functions.
*
* @note These are not enough to drive any particular Ethernet PHY.
* They provide a common configuration structure and management functions.
*
*/
These are not enough to drive any particular Ethernet PHY, but they provide a common configuration structure and
management functions.
*/
/** Configure fixed pins for RMII data interface.
This configures GPIOs 0, 19, 22, 25, 26, 27 for use with RMII
data interface. These pins cannot be changed, and must be wired to
ethernet functions.
This is not sufficient to fully configure the Ethernet PHY,
MDIO configuration interface pins (such as SMI MDC, MDO, MDI)
must also be configured correctly in the GPIO matrix.
*/
/**
* @brief Configure fixed pins for RMII data interface.
*
* @note This configures GPIOs 0, 19, 22, 25, 26, 27 for use with RMII data interface.
* These pins cannot be changed, and must be wired to ethernet functions.
* This is not sufficient to fully configure the Ethernet PHY.
* MDIO configuration interface pins (such as SMI MDC, MDO, MDI) must also be configured correctly in the GPIO matrix.
*
*/
void phy_rmii_configure_data_interface_pins(void);
/** Configure variable pins for SMI (MDIO) ethernet functions.
Calling this function along with mii_configure_default_pins() will
fully configure the GPIOs for the ethernet PHY.
/**
* @brief Configure variable pins for SMI ethernet functions.
*
* @param mdc_gpio MDC GPIO Pin number
* @param mdio_gpio MDIO GPIO Pin number
*
* @note Calling this function along with mii_configure_default_pins() will fully configure the GPIOs for the ethernet PHY.
*/
void phy_rmii_smi_configure_pins(uint8_t mdc_gpio, uint8_t mdio_gpio);
/** Enable flow control in standard PHY MII register.
/**
* @brief Enable flow control in standard PHY MII register.
*
*/
void phy_mii_enable_flow_ctrl(void);
/**
* @brief Check Ethernet link status via MII interface
*
* @return true Link is on
* @return false Link is off
*/
bool phy_mii_check_link_status(void);
/**
* @brief Check pause frame ability of partner via MII interface
*
* @return true Partner is able to process pause frame
* @return false Partner can not process pause frame
*/
bool phy_mii_get_partner_pause_enable(void);
#ifdef __cplusplus

75
components/ethernet/include/eth_phy/phy_ip101.h Normal file
View file

@ -0,0 +1,75 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "phy.h"
/**
* @brief Dump IP101 PHY SMI configuration registers
*
*/
void phy_ip101_dump_registers();
/**
* @brief Default IP101 phy_check_init function
*
*/
void phy_ip101_check_phy_init(void);
/**
* @brief Default IP101 phy_get_speed_mode function
*
* @return eth_speed_mode_t Ethernet speed mode
*/
eth_speed_mode_t phy_ip101_get_speed_mode(void);
/**
* @brief Default IP101 phy_get_duplex_mode function
*
* @return eth_duplex_mode_t Ethernet duplex mode
*/
eth_duplex_mode_t phy_ip101_get_duplex_mode(void);
/**
* @brief Default IP101 phy_power_enable function
*
*/
void phy_ip101_power_enable(bool);
/**
* @brief Default IP101 phy_init function
*
* @return esp_err_t
* - ESP_OK on success
* - ESP_FAIL on error
*/
esp_err_t phy_ip101_init(void);
/**
* @brief Default IP101 PHY configuration
*
* @note This configuration is not suitable for use as-is,
* it will need to be modified for your particular PHY hardware setup.
*
*/
extern const eth_config_t phy_ip101_default_ethernet_config;
#ifdef __cplusplus
}
#endif

42
components/ethernet/include/eth_phy/phy_lan8720.h
View file

@ -20,45 +20,53 @@ extern "C" {
#include "phy.h"
/** @brief Dump all LAN8720 PHY SMI configuration registers
/**
* @brief Dump LAN8720 PHY SMI configuration registers
*
* @note These registers are dumped at 'debug' level, so output
* may not be visible depending on default log levels.
*/
void phy_lan8720_dump_registers();
/** @brief Default LAN8720 phy_check_init function.
/**
* @brief Default LAN8720 phy_check_init function
*
*/
void phy_lan8720_check_phy_init(void);
/** @brief Default LAN8720 phy_get_speed_mode function.
/**
* @brief Default LAN8720 phy_get_speed_mode function
*
* @return eth_speed_mode_t Ethernet speed mode
*/
eth_speed_mode_t phy_lan8720_get_speed_mode(void);
/** @brief Default LAN8720 phy_get_duplex_mode function.
/**
* @brief Default LAN8720 phy_get_duplex_mode function
*
* @return eth_duplex_mode_t Ethernet duplex mode
*/
eth_duplex_mode_t phy_lan8720_get_duplex_mode(void);
/** @brief Default LAN8720 phy_power_enable function.
/**
* @brief Default LAN8720 phy_power_enable function
*
* @note This function may need to be replaced with a custom function
* if the PHY has a GPIO to enable power or start a clock.
*
* Consult the ethernet example to see how this is done.
*/
void phy_lan8720_power_enable(bool);
/** @brief Default LAN8720 phy_init function.
/**
* @brief Default LAN8720 phy_init function
*
* @return esp_err_t
* - ESP_OK on success
* - ESP_FAIL on error
*/
esp_err_t phy_lan8720_init(void);
/** @brief Default LAN8720 PHY configuration
/**
* @brief Default LAN8720 PHY configuration
*
* This configuration is not suitable for use as-is, it will need
* to be modified for your particular PHY hardware setup.
* @note This configuration is not suitable for use as-is,
* it will need to be modified for your particular PHY hardware setup.
*
* Consult the Ethernet example to see how this is done.
*/
extern const eth_config_t phy_lan8720_default_ethernet_config;

7
components/ethernet/include/eth_phy/phy_reg.h
View file

@ -18,9 +18,10 @@
extern "C" {
#endif
/* This header contains register/bit masks for the standard
PHY MII registers that should be supported by all PHY models.
*/
/**
* @brief This header contains register/bit masks for the standard PHY MII registers that should be supported by all PHY models.
*
*/
#define MII_BASIC_MODE_CONTROL_REG (0x0)
#define MII_SOFTWARE_RESET BIT(15)

41
components/ethernet/include/eth_phy/phy_tlk110.h
View file

@ -20,44 +20,53 @@ extern "C" {
#include "phy.h"
/** @brief Dump all TLK110 PHY SMI configuration registers
/**
* @brief Dump TLK110 PHY SMI configuration registers
*
* @note These registers are dumped at 'debug' level, so output
* may not be visible depending on default log levels.
*/
void phy_tlk110_dump_registers();
/** @brief Default TLK110 phy_check_init function.
/**
* @brief Default TLK110 phy_check_init function
*
*/
void phy_tlk110_check_phy_init(void);
/** @brief Default TLK110 phy_get_speed_mode function.
/**
* @brief Default TLK110 phy_get_speed_mode function
*
* @return eth_speed_mode_t Ethernet speed mode
*/
eth_speed_mode_t phy_tlk110_get_speed_mode(void);
/** @brief Default TLK110 phy_get_duplex_mode function.
/**
* @brief Default TLK110 phy_get_duplex_mode function
*
* @return eth_duplex_mode_t Ethernet duplex mode
*/
eth_duplex_mode_t phy_tlk110_get_duplex_mode(void);
/** @brief Default TLK110 phy_power_enable function.
/**
* @brief Default TLK110 phy_power_enable function
*
* @note This function may need to be replaced with a custom function
* if the PHY has a GPIO to enable power or start a clock.
*
* Consult the ethernet example to see how this is done.
*/
void phy_tlk110_power_enable(bool);
/** @brief Default TLK110 phy_init function.
/**
* @brief Default TLK110 phy_init function
*
* @return esp_err_t
* - ESP_OK on success
* - ESP_FAIL on error
*/
esp_err_t phy_tlk110_init(void);
/** @brief Default TLK110 PHY configuration
/**
* @brief Default TLK110 PHY configuration
*
* This configuration is not suitable for use as-is, it will need
* to be modified for your particular PHY hardware setup.
* @note This configuration is not suitable for use as-is,
* it will need to be modified for your particular PHY hardware setup.
*
* Consult the Ethernet example to see how this is done.
*/
extern const eth_config_t phy_tlk110_default_ethernet_config;

1
docs/Doxyfile
View file

@ -60,6 +60,7 @@ INPUT = \
../../components/ethernet/include/eth_phy/phy.h \
../../components/ethernet/include/eth_phy/phy_tlk110.h \
../../components/ethernet/include/eth_phy/phy_lan8720.h \
../../components/ethernet/include/eth_phy/phy_ip101.h \
##
## Peripherals - API Reference
##

9
docs/en/api-reference/ethernet/esp_eth.rst
View file

@ -4,7 +4,8 @@ ETHERNET
Application Example
-------------------
Ethernet example: :example:`ethernet/ethernet`.
- Ethernet basic example: :example:`ethernet/ethernet`.
- Ethernet iperf example: :example:`ethernet/iperf`.
PHY Interfaces
--------------
@ -16,12 +17,14 @@ Headers include a default configuration structure. These default configurations
* :component_file:`ethernet/include/eth_phy/phy.h` (common)
* :component_file:`ethernet/include/eth_phy/phy_tlk110.h`
* :component_file:`ethernet/include/eth_phy/phy_lan8720.h`
* :component_file:`ethernet/include/eth_phy/phy_ip101.h`
PHY Configuration Constants
^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. doxygenvariable:: phy_tlk110_default_ethernet_config
.. doxygenvariable:: phy_lan8720_default_ethernet_config
.. doxygenvariable:: phy_ip101_default_ethernet_config
API Reference - Ethernet
@ -44,4 +47,8 @@ API Reference - PHY LAN8720
.. include:: /_build/inc/phy_lan8720.inc
API Reference - PHY IP101
-------------------------
.. include:: /_build/inc/phy_ip101.inc

164
examples/ethernet/ethernet/main/Kconfig.projbuild
View file

@ -1,92 +1,94 @@
menu "Example Configuration"
choice PHY_MODEL
prompt "Ethernet PHY"
default CONFIG_PHY_TLK110
help
Select the PHY driver to use for the example.
choice PHY_MODEL
prompt "Ethernet PHY Device"
default PHY_TLK110
help
Select the PHY driver to use for the example.
config PHY_IP101
bool "IP101"
help
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
config PHY_TLK110
bool "TLK110"
help
TLK110 is an Industrial 10/100Mbps Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/TLK110 for information about it.
config PHY_LAN8720
bool "LAN8720"
help
LAN8720 is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
Goto https://www.microchip.com/LAN8720A for more information about it.
endchoice
config PHY_TLK110
bool "TI TLK110 PHY"
help
Select this to use the TI TLK110 PHY
config PHY_ADDRESS
int "Ethernet PHY Address"
default 31
range 0 31
help
PHY Address of your PHY device. It dependens on your schematic design.
config PHY_LAN8720
bool "Microchip LAN8720 PHY"
help
Select this to use the Microchip LAN8720 PHY
choice PHY_CLOCK_MODE
prompt "Ethernet PHY Clock Mode"
default PHY_CLOCK_GPIO0_IN
help
Select external (input on GPIO0) or internal (output on GPIO0, GPIO16 or GPIO17) RMII clock.
config PHY_CLOCK_GPIO0_IN
bool "GPIO0 Input"
help
Input of 50MHz RMII clock on GPIO0.
config PHY_CLOCK_GPIO0_OUT
bool "GPIO0 Output"
help
Output the internal 50MHz RMII clock on GPIO0.
config PHY_CLOCK_GPIO16_OUT
bool "GPIO16 Output"
help
Output the internal 50MHz RMII clock on GPIO16.
config PHY_CLOCK_GPIO17_OUT
bool "GPIO17 Output (inverted)"
help
Output the internal 50MHz RMII clock on GPIO17 (inverted signal).
endchoice
endchoice
config PHY_CLOCK_MODE
int
default 0 if PHY_CLOCK_GPIO0_IN
default 1 if PHY_CLOCK_GPIO0_OUT
default 2 if PHY_CLOCK_GPIO16_OUT
default 3 if PHY_CLOCK_GPIO17_OUT
config PHY_USE_POWER_PIN
bool "Use PHY Power (enable / disable) pin"
default n
help
Use a GPIO "power pin" to power the PHY on/off during operation.
When using GPIO0 to input RMII clock, the reset process will be interfered by this clock.
So we need another GPIO to control the switch on / off of the RMII clock.
config PHY_ADDRESS
int "PHY Address (0-31)"
default 31
range 0 31
help
Select the PHY Address (0-31) for the hardware configuration and PHY model.
TLK110 default 31
LAN8720 default 1 or 0
if PHY_USE_POWER_PIN
config PHY_POWER_PIN
int "PHY Power GPIO"
default 17
range 0 33
depends on PHY_USE_POWER_PIN
help
GPIO number to use for powering on/off the PHY.
endif
config PHY_SMI_MDC_PIN
int "SMI MDC Pin Number"
default 23
range 0 33
help
GPIO number used for SMI clock signal.
choice PHY_CLOCK_MODE
prompt "EMAC clock mode"
default PHY_CLOCK_GPIO0_IN
help
Select external (input on GPIO0) or internal (output on GPIO16 or GPIO17) clock
config PHY_CLOCK_GPIO0_IN
bool "GPIO0 input"
help
Input of 50MHz refclock on GPIO0
config PHY_CLOCK_GPIO16_OUT
bool "GPIO16 output"
help
Output the internal 50MHz APLL clock on GPIO16
config PHY_CLOCK_GPIO17_OUT
bool "GPIO17 output (inverted)"
help
Output the internal 50MHz APLL clock on GPIO17 (inverted signal)
endchoice
config PHY_CLOCK_MODE
int
default 0 if PHY_CLOCK_GPIO0_IN
default 2 if PHY_CLOCK_GPIO16_OUT
default 3 if PHY_CLOCK_GPIO17_OUT
config PHY_USE_POWER_PIN
bool "Use PHY Power (enable/disable) pin"
default y
help
Use a GPIO "power pin" to power the PHY on/off during operation.
Consult the example README for more details
config PHY_POWER_PIN
int "PHY Power GPIO"
default 17
range 0 33
depends on PHY_USE_POWER_PIN
help
GPIO number to use for powering on/off the PHY.
config PHY_SMI_MDC_PIN
int "SMI MDC Pin"
default 23
range 0 33
help
GPIO number to use for SMI clock output MDC to PHY.
config PHY_SMI_MDIO_PIN
int "SMI MDIO Pin"
default 18
range 0 33
help
GPIO number to use for SMI data pin MDIO to/from PHY.
config PHY_SMI_MDIO_PIN
int "SMI MDIO Pin Number"
default 18
range 0 33
help
GPIO number used for SMI data signal.
endmenu

13
examples/ethernet/ethernet/main/ethernet_example_main.c
View file

@ -8,30 +8,27 @@
*/
#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_err.h"
#include "esp_event_loop.h"
#include "esp_event.h"
#include "esp_log.h"
#include "esp_eth.h"
#include "rom/gpio.h"
#include "tcpip_adapter.h"
#include "driver/gpio.h"
#include "driver/periph_ctrl.h"
#ifdef CONFIG_PHY_LAN8720
#if CONFIG_PHY_LAN8720
#include "eth_phy/phy_lan8720.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_lan8720_default_ethernet_config
#endif
#ifdef CONFIG_PHY_TLK110
#elif CONFIG_PHY_TLK110
#include "eth_phy/phy_tlk110.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_tlk110_default_ethernet_config
#elif CONFIG_PHY_IP101
#include "eth_phy/phy_ip101.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_ip101_default_ethernet_config
#endif
static const char *TAG = "eth_example";

173
examples/ethernet/iperf/main/Kconfig.projbuild
View file

@ -1,91 +1,106 @@
menu "Example Configuration"
config STORE_HISTORY
bool "Store command history in flash"
default y
help
Linenoise line editing library provides functions to save and load
command history. If this option is enabled, initalizes a FAT filesystem
and uses it to store command history.
config STORE_HISTORY
bool "Store command history in flash"
default y
help
Linenoise line editing library provides functions to save and load
command history. If this option is enabled, initalizes a FAT filesystem
and uses it to store command history.
menu "Etherent PHY Device"
choice PHY_MODEL
prompt "Ethernet PHY"
default CONFIG_PHY_TLK110
help
Select the PHY driver to use for the example.
config PHY_TLK110
bool "TI TLK110 PHY"
help
Select this to use the TI TLK110 PHY
config PHY_LAN8720
bool "Microchip LAN8720 PHY"
help
Select this to use the Microchip LAN8720 PHY
endchoice
menu "Etherent PHY Device"
choice PHY_MODEL
prompt "Ethernet PHY Device"
default PHY_TLK110
help
Select the PHY driver to use for the example.
config PHY_IP101
bool "IP101"
help
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
config PHY_TLK110
bool "TLK110"
help
TLK110 is an Industrial 10/100Mbps Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/TLK110 for information about it.
config PHY_LAN8720
bool "LAN8720"
help
LAN8720 is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
Goto https://www.microchip.com/LAN8720A for more information about it.
endchoice
config PHY_ADDRESS
int "PHY Address (0-31)"
default 31
range 0 31
help
Set the PHY Address (0-31) for the hardware configuration.
config PHY_ADDRESS
int "Ethernet PHY Address"
default 31
range 0 31
help
PHY Address of your PHY device. It dependens on your schematic design.
choice PHY_CLOCK_MODE
prompt "EMAC clock mode"
default PHY_CLOCK_GPIO0_IN
help
Select external (input on GPIO0) or internal (output on GPIO16 or GPIO17) clock
config PHY_CLOCK_GPIO0_IN
bool "GPIO0 input"
help
Input of 50MHz refclock on GPIO0
config PHY_CLOCK_GPIO16_OUT
bool "GPIO16 output"
help
Output the internal 50MHz APLL clock on GPIO16
config PHY_CLOCK_GPIO17_OUT
bool "GPIO17 output (inverted)"
help
Output the internal 50MHz APLL clock on GPIO17 (inverted signal)
endchoice
choice PHY_CLOCK_MODE
prompt "Ethernet PHY Clock Mode"
default PHY_CLOCK_GPIO0_IN
help
Select external (input on GPIO0) or internal (output on GPIO0, GPIO16 or GPIO17) RMII clock.
config PHY_CLOCK_GPIO0_IN
bool "GPIO0 Input"
help
Input of 50MHz RMII clock on GPIO0.
config PHY_CLOCK_GPIO0_OUT
bool "GPIO0 Output"
help
Output the internal 50MHz RMII clock on GPIO0.
config PHY_CLOCK_GPIO16_OUT
bool "GPIO16 Output"
help
Output the internal 50MHz RMII clock on GPIO16.
config PHY_CLOCK_GPIO17_OUT
bool "GPIO17 Output (inverted)"
help
Output the internal 50MHz RMII clock on GPIO17 (inverted signal).
endchoice
config PHY_CLOCK_MODE
int
default 0 if PHY_CLOCK_GPIO0_IN
default 2 if PHY_CLOCK_GPIO16_OUT
default 3 if PHY_CLOCK_GPIO17_OUT
config PHY_CLOCK_MODE
int
default 0 if PHY_CLOCK_GPIO0_IN
default 1 if PHY_CLOCK_GPIO0_OUT
default 2 if PHY_CLOCK_GPIO16_OUT
default 3 if PHY_CLOCK_GPIO17_OUT
config PHY_USE_POWER_PIN
bool "Use PHY Power (enable/disable) pin"
default y
help
Use a GPIO "power pin" to power the PHY on/off during operation.
config PHY_USE_POWER_PIN
bool "Use PHY Power (enable / disable) pin"
default n
help
Use a GPIO "power pin" to power the PHY on/off during operation.
When using GPIO0 to input RMII clock, the reset process will be interfered by this clock.
So we need another GPIO to control the switch on / off of the RMII clock.
if PHY_USE_POWER_PIN
config PHY_POWER_PIN
int "PHY Power GPIO"
default 17
range 0 33
help
GPIO number to use for powering on/off the PHY.
endif
endmenu
if PHY_USE_POWER_PIN
config PHY_POWER_PIN
int "PHY Power GPIO"
default 17
range 0 33
depends on PHY_USE_POWER_PIN
help
GPIO number to use for powering on/off the PHY.
endif
endmenu
menu "Etherent SMI interface"
config PHY_SMI_MDC_PIN
int "SMI MDC Pin"
default 23
range 0 33
help
GPIO number to use for SMI clock output MDC to PHY.
menu "Etherent SMI interface"
config PHY_SMI_MDC_PIN
int "SMI MDC Pin Number"
default 23
range 0 33
help
GPIO number used for SMI clock signal.
config PHY_SMI_MDIO_PIN
int "SMI MDIO Pin"
default 18
range 0 33
help
GPIO number to use for SMI data pin MDIO to/from PHY.
endmenu
config PHY_SMI_MDIO_PIN
int "SMI MDIO Pin Number"
default 18
range 0 33
help
GPIO number used for SMI data signal.
endmenu
endmenu

8
examples/ethernet/iperf/main/cmd_ethernet.c
View file

@ -19,13 +19,15 @@
#include "iperf.h"
#include "sdkconfig.h"
#ifdef CONFIG_PHY_LAN8720
#if CONFIG_PHY_LAN8720
#include "eth_phy/phy_lan8720.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_lan8720_default_ethernet_config
#endif
#ifdef CONFIG_PHY_TLK110
#elif CONFIG_PHY_TLK110
#include "eth_phy/phy_tlk110.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_tlk110_default_ethernet_config
#elif CONFIG_PHY_IP101
#include "eth_phy/phy_ip101.h"
#define DEFAULT_ETHERNET_PHY_CONFIG phy_ip101_default_ethernet_config
#endif
static tcpip_adapter_ip_info_t ip;