Merge branch 'bugfix/adc_calibration_override_format' into 'master'

esp_adc_cal/Fix register definition and add override intsructions for eFuse

See merge request idf/esp-idf!2001
This commit is contained in:
Ivan Grokhotkov 2018-03-16 20:19:01 +08:00
commit 09a30ddfdc

View file

@ -21,7 +21,6 @@
#include "esp_adc_cal.h"
/* ----------------------------- Configuration ------------------------------ */
#ifdef CONFIG_ADC_CAL_EFUSE_TP_ENABLE
#define EFUSE_TP_ENABLED 1
#else
@ -39,23 +38,21 @@
#else
#define LUT_ENABLED 0
#endif
/*
* By default, ESP32s that have Two Point values burned to BLOCK3 will also
* set the EFUSE_BLK3_PART_RESERVE flag to indicate this. However, some ESP32s
* with Two Point values do not set this flag. Set the following definition
* to 0 if this is the case.
/* ESP32s with both Two Point Values and Vref burned into eFuse are required to
* also also burn the EFUSE_BLK3_PART_RESERVE flag. A limited set of ESP32s
* (not available through regular sales channel) DO NOT have the
* EFUSE_BLK3_PART_RESERVE burned. Moreover, this set of ESP32s represents Vref
* in Two's Complement format. If this is the case, modify the preprocessor
* definitions below as follows...
* #define CHECK_BLK3_FLAG 0 //Do not check BLK3 flag as it is not burned
* #define VREF_FORMAT 1 //eFuse Vref is in Two's Complement format
*/
#define CHECK_BLK3_FLAG 1
/*
* By default, Vref is burned into eFuse of ESP32s in Sign-Magnitude format.
* However some chips have Vref burned in two's complement format. Set the following
* definition to 1 if this is the case.
*/
#define VREF_FORMAT 0
/* ------------------------------ eFuse Access ----------------------------- */
#define BLK3_RESERVED_REG EFUSE_BLK0_RDATA4_REG
#define BLK3_RESERVED_REG EFUSE_BLK0_RDATA3_REG
#define VREF_REG EFUSE_BLK0_RDATA4_REG
#define VREF_MASK 0x1F
@ -74,7 +71,6 @@
#define TP_STEP_SIZE 4
/* ----------------------- Raw to Voltage Constants ------------------------- */
#define LIN_COEFF_A_SCALE 65536
#define LIN_COEFF_A_ROUND (LIN_COEFF_A_SCALE/2)
@ -93,7 +89,6 @@
})
/* ------------------------ Characterization Constants ---------------------- */
static const uint32_t adc1_tp_atten_scale[4] = {65504, 86975, 120389, 224310};
static const uint32_t adc2_tp_atten_scale[4] = {65467, 86861, 120416, 224708};
static const uint32_t adc1_tp_atten_offset[4] = {0, 1, 27, 54};
@ -115,7 +110,6 @@ static const uint32_t lut_adc2_high[LUT_POINTS] = {2657, 2698, 2738, 2774, 2807,
2971, 2996, 3020, 3043, 3067, 3092, 3116, 3139, 3162, 3185};
/* ----------------------- EFuse Access Functions --------------------------- */
static bool check_efuse_vref()
{
//Check if Vref is burned in eFuse
@ -200,7 +194,6 @@ static uint32_t read_efuse_tp_high(adc_unit_t adc_num)
}
/* ----------------------- Characterization Functions ----------------------- */
static void characterize_using_two_point(adc_unit_t adc_num,
adc_atten_t atten,
uint32_t high,
@ -250,7 +243,6 @@ static void characterize_using_vref(adc_unit_t adc_num,
}
/* ------------------------ Conversion Functions --------------------------- */
static uint32_t calculate_voltage_linear(uint32_t adc_reading, uint32_t coeff_a, uint32_t coeff_b)
{
//Where voltage = coeff_a * adc_reading + coeff_b
@ -290,7 +282,6 @@ static inline uint32_t interpolate_two_points(uint32_t y1, uint32_t y2, uint32_t
}
/* ------------------------- Public API ------------------------------------- */
esp_err_t esp_adc_cal_check_efuse(esp_adc_cal_value_t source)
{
if (source == ESP_ADC_CAL_VAL_EFUSE_TP) {
@ -339,7 +330,7 @@ esp_adc_cal_value_t esp_adc_cal_characterize(adc_unit_t adc_num,
chars->adc_num = adc_num;
chars->atten = atten;
chars->bit_width = bit_width;
chars->vref = (efuse_vref_present) ? read_efuse_vref() : default_vref;
chars->vref = (EFUSE_VREF_ENABLED && efuse_vref_present) ? read_efuse_vref() : default_vref;
//Initialize fields for lookup table if necessary
if (LUT_ENABLED && atten == ADC_ATTEN_DB_11) {
chars->low_curve = (adc_num == ADC_UNIT_1) ? lut_adc1_low : lut_adc2_low;
@ -401,7 +392,6 @@ esp_err_t esp_adc_cal_get_voltage(adc_channel_t channel,
}
/* ------------------------ Deprecated API --------------------------------- */
void esp_adc_cal_get_characteristics(uint32_t vref,
adc_atten_t atten,
adc_bits_width_t bit_width,