Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge branch 'fix/sdio_speed_4bit' into 'master'

Browse source 
fix(sdio): update sdio to better run in 4bit HS mode

See merge request idf/esp-idf!2704
This commit is contained in:
Angus Gratton 2018-07-12 08:54:03 +08:00
parent cfb3759635 c34672e7dc
commit 04caff2fb2
5 changed files with 40 additions and 61 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

30
components/driver/include/driver/sdio_slave.h
View file

@ -47,10 +47,12 @@ typedef enum {
/// Timing of SDIO slave
typedef enum {
SDIO_SLAVE_TIMING_NSEND_PSAMPLE = 0,///< Send at negedge, and sample at posedge. Default value for SD protocol.
SDIO_SLAVE_TIMING_NSEND_NSAMPLE, ///< Send at negedge, and sample at negedge
SDIO_SLAVE_TIMING_PSEND_PSAMPLE, ///< Send at posedge, and sample at posedge
SDIO_SLAVE_TIMING_PSEND_PSAMPLE = 0,/**< Send at posedge, and sample at posedge. Default value for HS mode.
* Normally there's no problem using this to work in DS mode.
*/
SDIO_SLAVE_TIMING_NSEND_PSAMPLE ,///< Send at negedge, and sample at posedge. Default value for DS mode and below.
SDIO_SLAVE_TIMING_PSEND_NSAMPLE, ///< Send at posedge, and sample at negedge
SDIO_SLAVE_TIMING_NSEND_NSAMPLE, ///< Send at negedge, and sample at negedge
} sdio_slave_timing_t;
/// Configuration of SDIO slave mode
@ -72,20 +74,20 @@ typedef struct {
///< Buffer size of the slave pre-defined between host and slave before communication. All receive buffer given to the driver should be larger than this.
sdio_event_cb_t event_cb; ///< when the host interrupts slave, this callback will be called with interrupt number (0-7).
uint32_t flags; ///< Features to be enabled for the slave, combinations of ``SDIO_SLAVE_FLAG_*``.
#define SDIO_SLAVE_FLAG_DAT2_DISABLED BIT(0) /**< It is required by the SD specification that all 4 data
lines should be used and pulled up even in 1-bit mode or SPI mode. However, as a feature, the user can speicfy
this flag to make use of DAT2 pin in 1-bit mode. Note that the host cannot read CCCR registers to know we don't
#define SDIO_SLAVE_FLAG_DAT2_DISABLED BIT(0) /**< It is required by the SD specification that all 4 data
lines should be used and pulled up even in 1-bit mode or SPI mode. However, as a feature, the user can specify
this flag to make use of DAT2 pin in 1-bit mode. Note that the host cannot read CCCR registers to know we don't
support 4-bit mode anymore, please do this at your own risk.
*/
#define SDIO_SLAVE_FLAG_HOST_INTR_DISABLED BIT(1) /**< The DAT1 line is used as the interrupt line in SDIO
protocol. However, as a feature, the user can speicfy this flag to make use of DAT1 pin of the slave in 1-bit
#define SDIO_SLAVE_FLAG_HOST_INTR_DISABLED BIT(1) /**< The DAT1 line is used as the interrupt line in SDIO
protocol. However, as a feature, the user can specify this flag to make use of DAT1 pin of the slave in 1-bit
mode. Note that the host has to do polling to the interrupt registers to know whether there are interrupts from
the slave. And it cannot read CCCR registers to know we don't support 4-bit mode anymore, please do this at
the slave. And it cannot read CCCR registers to know we don't support 4-bit mode anymore, please do this at
your own risk.
*/
#define SDIO_SLAVE_FLAG_INTERNAL_PULLUP BIT(2) /**< Enable internal pullups for enabled pins. It is required
by the SD specification that all the 4 data lines should be pulled up even in 1-bit mode or SPI mode. Note that
the internal pull-ups are not sufficient for stable communication, please do connect external pull-ups on the
#define SDIO_SLAVE_FLAG_INTERNAL_PULLUP BIT(2) /**< Enable internal pullups for enabled pins. It is required
by the SD specification that all the 4 data lines should be pulled up even in 1-bit mode or SPI mode. Note that
the internal pull-ups are not sufficient for stable communication, please do connect external pull-ups on the
bus. This is only for example and debug use.
*/
} sdio_slave_config_t;
@ -214,12 +216,12 @@ uint8_t* sdio_slave_recv_get_buf(sdio_slave_buf_handle_t handle, size_t *len_o);
esp_err_t sdio_slave_send_queue(uint8_t* addr, size_t len, void* arg, TickType_t wait);
/** Return the ownership of a finished transaction.
* @param arg_o Argument of the finished transaction.
* @param out_arg Argument of the finished transaction. Set to NULL if unused.
* @param wait Time to wait if there's no finished sending transaction.
*
* @return ESP_ERR_TIMEOUT if no transaction finished, or ESP_OK if succeed.
*/
esp_err_t sdio_slave_send_get_finished(void** arg_o, TickType_t wait);
esp_err_t sdio_slave_send_get_finished(void** out_arg, TickType_t wait);
/** Start a new sending transfer, and wait for it (blocked) to be finished.
*

24
components/driver/sdio_slave.c
View file

@ -472,9 +472,9 @@ static void configure_pin(int pin, uint32_t func, bool pullup)
PIN_INPUT_ENABLE(reg);
PIN_FUNC_SELECT(reg, sdmmc_func);
PIN_SET_DRV(reg, drive_strength);
gpio_pulldown_dis(pin);
if (pullup) {
gpio_pullup_en(pin);
gpio_pulldown_dis(pin);
}
}
@ -516,28 +516,28 @@ static inline esp_err_t sdio_slave_hw_init(sdio_slave_config_t *config)
switch(config->timing) {
case SDIO_SLAVE_TIMING_PSEND_PSAMPLE:
HOST.conf.frc_sdio20 = 0xf;
HOST.conf.frc_sdio20 = 0x1f;
HOST.conf.frc_sdio11 = 0;
HOST.conf.frc_pos_samp = 0xf;
HOST.conf.frc_pos_samp = 0x1f;
HOST.conf.frc_neg_samp = 0;
break;
case SDIO_SLAVE_TIMING_PSEND_NSAMPLE:
HOST.conf.frc_sdio20 = 0xf;
HOST.conf.frc_sdio20 = 0x1f;
HOST.conf.frc_sdio11 = 0;
HOST.conf.frc_pos_samp = 0;
HOST.conf.frc_neg_samp = 0xf;
HOST.conf.frc_neg_samp = 0x1f;
break;
case SDIO_SLAVE_TIMING_NSEND_PSAMPLE:
HOST.conf.frc_sdio20 = 0;
HOST.conf.frc_sdio11 = 0xf;
HOST.conf.frc_pos_samp = 0xf;
HOST.conf.frc_sdio11 = 0x1f;
HOST.conf.frc_pos_samp = 0x1f;
HOST.conf.frc_neg_samp = 0;
break;
case SDIO_SLAVE_TIMING_NSEND_NSAMPLE:
HOST.conf.frc_sdio20 = 0;
HOST.conf.frc_sdio11 = 0xf;
HOST.conf.frc_sdio11 = 0x1f;
HOST.conf.frc_pos_samp = 0;
HOST.conf.frc_neg_samp = 0xf;
HOST.conf.frc_neg_samp = 0x1f;
break;
}
@ -929,9 +929,11 @@ esp_err_t sdio_slave_send_queue(uint8_t* addr, size_t len, void* arg, TickType_t
return ESP_OK;
}
esp_err_t sdio_slave_send_get_finished(void** arg, TickType_t wait)
esp_err_t sdio_slave_send_get_finished(void** out_arg, TickType_t wait)
{
portBASE_TYPE err = xQueueReceive(context.ret_queue, arg, wait);
void* arg = NULL;
portBASE_TYPE err = xQueueReceive(context.ret_queue, &arg, wait);
if (out_arg) *out_arg = arg;
if (err != pdTRUE) return ESP_ERR_TIMEOUT;
return ESP_OK;
}

11
components/driver/sdmmc_host.c
View file

@ -290,6 +290,8 @@ static void configure_pin(int pin)
const int sdmmc_func = 3;
const int drive_strength = 3;
assert(pin!=-1);
gpio_pulldown_dis(pin);
uint32_t reg = GPIO_PIN_MUX_REG[pin];
assert(reg != UINT32_MAX);
PIN_INPUT_ENABLE(reg);
@ -586,26 +588,17 @@ esp_err_t sdmmc_host_pullup_en(int slot, int width)
}
//according to the spec, the host control the clk, we don't to pull it up here
gpio_pullup_en(sdmmc_slot_info[slot].cmd_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].cmd_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d0_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d0_gpio);
if (width >= 4) {
gpio_pullup_en(sdmmc_slot_info[slot].d1_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d1_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d2_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d2_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d3_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d3_gpio);
}
if (width == 8) {
gpio_pullup_en(sdmmc_slot_info[slot].d4_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d4_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d5_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d5_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d6_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d6_gpio);
gpio_pullup_en(sdmmc_slot_info[slot].d7_gpio);
gpio_pulldown_dis(sdmmc_slot_info[slot].d7_gpio);
}
return ESP_OK;
}

19
examples/peripherals/sdio/host/Kconfig.projbuild
View file

@ -1,19 +0,0 @@
menu "Example Configuration"
choice EXAMPLE_SLAVE
prompt "Id of Slave used in Espressif master-slave board."
default EXAMPLE_SLAVE_NONE
help
If Espressif master-slave board is used, select which slave is used.
config EXAMPLE_SLAVE_NONE
bool "Not using Espressif master-slave board."
config EXAMPLE_SLAVE_B1
bool "Using slave B1"
config EXAMPLE_SLAVE_B2
bool "Using slave B2"
config EXAMPLE_SLAVE_B3
bool "Using slave B3"
endchoice
endmenu

17
examples/peripherals/sdio/host/main/app_main.c
View file

@ -152,7 +152,7 @@ esp_err_t slave_init(esp_slave_context_t *context)
#ifdef CONFIG_SDIO_EXAMPLE_HIGHSPEED
config.max_freq_khz = SDMMC_FREQ_HIGHSPEED;
#else
config.max_freq_khz = SDMMC_FREQ_PROBING;
config.max_freq_khz = SDMMC_FREQ_DEFAULT;
#endif
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
@ -209,14 +209,15 @@ void slave_power_on()
};
gpio_config(&cfg);
gpio_set_level(SLAVE_PWR_GPIO, 0); //low active
vTaskDelay(100);
#endif
}
DMA_ATTR uint8_t rcv_buffer[READ_BUFFER_LEN];
//try to get an interrupt from the slave and handle it, return if none.
esp_err_t process_event(esp_slave_context_t *context)
{
uint8_t buffer[READ_BUFFER_LEN];
esp_err_t ret = esp_slave_wait_int(context, 0);
if (ret == ESP_ERR_TIMEOUT) {
return ret;
@ -241,7 +242,7 @@ esp_err_t process_event(esp_slave_context_t *context)
ESP_LOGD(TAG, "new packet coming");
while (1) {
size_t size_read = READ_BUFFER_LEN;
ret = esp_slave_get_packet(context, buffer, READ_BUFFER_LEN, &size_read, wait_ms);
ret = esp_slave_get_packet(context, rcv_buffer, READ_BUFFER_LEN, &size_read, wait_ms);
if (ret == ESP_ERR_NOT_FOUND) {
ESP_LOGE(TAG, "interrupt but no data can be read");
break;
@ -251,7 +252,7 @@ esp_err_t process_event(esp_slave_context_t *context)
}
ESP_LOGI(TAG, "receive data, size: %d", size_read);
ESP_LOG_BUFFER_HEXDUMP(TAG, buffer, size_read, ESP_LOG_INFO);
ESP_LOG_BUFFER_HEXDUMP(TAG, rcv_buffer, size_read, ESP_LOG_INFO);
if (ret == ESP_OK) {
break;
}
@ -297,13 +298,13 @@ void job_write_reg(esp_slave_context_t *context, int value)
//use 1+1+1+1+4+4=12 packets, 513 and 517 not sent
int packet_len[] = {3, 6, 12, 128, 511, 512, 513, 517};
//the sending buffer should be word aligned
DMA_ATTR uint8_t buffer[1024];
DMA_ATTR uint8_t send_buffer[READ_BUFFER_LEN];
//send packets to the slave (they will return and be handled by the interrupt handler)
void job_fifo(esp_slave_context_t *context)
{
for (int i = 0; i < 1024; i++) {
buffer[i] = 0x46 + i * 5;
send_buffer[i] = 0x46 + i * 5;
}
esp_err_t ret;
@ -318,7 +319,7 @@ void job_fifo(esp_slave_context_t *context)
for (int i = 0; i < sizeof(packet_len) / sizeof(int); i++) {
const int wait_ms = 50;
int length = packet_len[i];
ret = esp_slave_send_packet(context, buffer + pointer, length, wait_ms);
ret = esp_slave_send_packet(context, send_buffer + pointer, length, wait_ms);
if (ret == ESP_ERR_TIMEOUT) {
ESP_LOGD(TAG, "several packets are expected to timeout.");
} else {