OVMS3-idf/components/esp32/include/rom/ets_sys.h

330 lines
9.2 KiB
C
Raw Normal View History

2016-08-17 15:08:22 +00:00
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ROM_ETS_SYS_H_
#define _ROM_ETS_SYS_H_
#include <stdint.h>
#include <stdbool.h>
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define ETS_DEBUG
#define ETS_SERIAL_ENABLED() (1)
typedef enum {
ETS_OK = 0,
ETS_FAILED = 1
} ETS_STATUS;
typedef uint32_t ETSSignal;
typedef uint32_t ETSParam;
typedef struct ETSEventTag ETSEvent;
struct ETSEventTag {
ETSSignal sig;
ETSParam par;
};
typedef void (*ETSTask)(ETSEvent *e);
enum ETS_User_Priorities {
/* task priorities... */
TICK_TASK_A_PRIO = 2,
KBD_TASK_PRIO = 5,
MAX_ETS_USER_PRIO = 16,
/* ISR priorities... */
MAX_ETS_USER_ISR_PRIO = 0xFF - 16
};
/* ETS interrupt entry and exit */
/* actually we don't need the following 2 macros any more since we won't exit
* isr until it is finised, more over, we don't do nest interrupt
*/
void ets_run(void);
void ets_task(ETSTask task, uint8_t prio, ETSEvent *queue, uint8_t qlen);
ETS_STATUS ets_post(uint8_t prio, ETSSignal sig, ETSParam par);
/*
* now things become complicated, print could be directed to uart and/or SDIO
*/
int ets_printf(const char *fmt, ...);
/* by default it's UART, just install_uart_printf, set putc1 to NULL to disable */
void ets_install_putc1(void (*p)(char c));
void ets_install_uart_printf(void);
/* no need to install, call directly */
int ets_uart_printf(const char *fmt, ...);
/* usually we don't need to call this, unless we want to disable SDIO print */
void ets_install_putc2(void (*p)(char c));
/* @prepare_buf: allocate buffer for printf internal writting
* @putc: just set to NULL, let printf write to to buffer, unless if you want more fancy stuff
* @post_printf: will be called every time printf finish write buffer
*
* main idea of external printf is re-directing content to an external buffer.
* e.g. sip module allocates an event buffer in prepare_buf() and send the event to host in post_printf()
* moreover, you can check printf_buf_remain_len in post_printf(), send the event to host till buf is
* about to full.
*
* TBD: Another approach is sending printf parameter to host and let host to decode, which could save some bytes.
*/
void ets_install_external_printf(void (*prepare_buf)(char ** bufptr, uint16_t *buflen, uint32_t *cookie),
void (*putc)(char c),
void (*post_printf)(uint32_t cookie));
uint16_t est_get_printf_buf_remain_len(void);
void est_reset_printf_buf_len(void);
/* external (SDIO) printf only, still need to install*/
int ets_external_printf(const char *fmt, ...);
#define ETS_PRINTF(...) ets_printf(...)
#define ETS_ASSERT(v) do { \
if (!(v)) { \
ets_printf("%s %u \n", __FILE__, __LINE__); \
while (1) {}; \
} \
} while (0);
/* memory and string support */
int8_t ets_char2xdigit(char ch);
uint8_t * ets_str2macaddr(uint8_t *macaddr, char *str);
void ets_getc(char *c);
void ets_putc(char c);
/* timer related */
typedef uint32_t ETSHandle;
typedef void ETSTimerFunc(void *timer_arg);
typedef struct _ETSTIMER_ {
struct _ETSTIMER_ *timer_next;
uint32_t timer_expire;
uint32_t timer_period;
ETSTimerFunc *timer_func;
void *timer_arg;
} ETSTimer;
void ets_timer_init(void);
void ets_timer_arm(ETSTimer *timer, uint32_t tmout, bool repeat);
void ets_timer_disarm(ETSTimer *timer);
void ets_timer_done(ETSTimer *ptimer);
void ets_timer_setfn(ETSTimer *ptimer, ETSTimerFunc *pfunction, void *parg);
/* watchdog related */
typedef enum {
WDT_NONE = -1,
WDT_DISABLED = 0,
WDT_CONTROL_RESET = 1,
WDT_CONTROL_INTR = 2, /* usually we use this mode? */
WDT_CONTROL_EXTERNAL_FEED = 3,
WDT_TESET_OVERFLOW = 4, // intend to make watchdog overflow to test
} WDT_MODE;
typedef enum{
WDT_INTERVAL_THREE_SEC = 3,
WDT_INTERVAL_SIX_SEC = 6,
WDT_INTERVAL_TWELVE_SEC = 12,
} WDT_INTERVAL_TIME;
void ets_wdt_init(void);
WDT_MODE ets_wdt_get_mode(void);
void ets_wdt_enable(WDT_MODE mode, WDT_INTERVAL_TIME feed_interval,
WDT_INTERVAL_TIME expire_interval);
WDT_MODE ets_wdt_disable(void);
void ets_wdt_restore(WDT_MODE old_mode);
/* interrupt related */
typedef void (* ets_isr_t)(void *);
#define ETS_WMAC_SOURCE 0
#define ETS_SLC_SOURCE 1
#define ETS_UART_SOURCE 13
#define ETS_UART1_SOURCE 14
#define ETS_FRC_TIMER2_SOURCE 43
#define ETS_WMAC_INUM 0
#define ETS_SLC_INUM 1
#define ETS_SPI_INUM 2
#define ETS_HSIP_INUM 2
#define ETS_I2S_INUM 2
#define ETS_RTC_INUM 3
#define ETS_FRC_TIMER1_INUM 9 /* use edge*/
#define ETS_FRC_TIMER2_INUM 10 /* use edge*/
#define ETS_WDT_INUM 8 /* use edge*/
#define ETS_GPIO_INUM 4
#define ETS_UART_INUM 5
#define ETS_UART1_INUM 5
#define ETS_MAX_INUM 6
void ets_isr_attach(int i, ets_isr_t func, void *arg);
void ets_isr_mask(uint32_t mask);
void ets_isr_unmask(uint32_t unmask);
void ets_intr_lock(void);
void ets_intr_unlock(void);
void intr_matrix_set(int cpu_no, uint32_t model_num, uint32_t intr_num);
#define _ETSTR(v) # v
#define _ETS_SET_INTLEVEL(intlevel) ({ unsigned __tmp; \
__asm__ __volatile__( "rsil %0, " _ETSTR(intlevel) "\n" \
: "=a" (__tmp) : : "memory" ); \
})
#define ETS_INTR_LOCK() \
ets_intr_lock()
#define ETS_INTR_UNLOCK() \
ets_intr_unlock()
#define ETS_CCOMPARE_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_CCOMPARE_INUM, (func), (void *)(arg))
#define ETS_PWM_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_PWM_INUM, (func), (void *)(arg))
#define ETS_WMAC_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_WMAC_INUM, (func), (void *)(arg))
#define ETS_FRC_TIMER1_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_FRC_TIMER1_INUM, (func), (void *)(arg))
#define ETS_FRC_TIMER2_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_FRC_TIMER2_INUM, (func), (void *)(arg))
#define ETS_GPIO_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_GPIO_INUM, (func), (void *)(arg))
#define ETS_UART_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_UART_INUM, (func), (void *)(arg))
#define ETS_WDT_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_WDT_INUM, (func), (void *)(arg))
#define ETS_RTC_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_RTC_INUM, (func), (void *)(arg))
#define ETS_SLC_INTR_ATTACH(func, arg) \
ets_isr_attach(ETS_SLC_INUM, (func), (void *)(arg))
#define ETS_INTR_ENABLE(inum) \
xt_ints_on((1<<inum))
2016-08-17 15:08:22 +00:00
#define ETS_INTR_DISABLE(inum) \
xt_ints_off((1<<inum))
2016-08-17 15:08:22 +00:00
#define ETS_CCOMPARE_INTR_ENBALE() \
ETS_INTR_ENABLE(ETS_CCOMPARE_INUM)
#define ETS_CCOMPARE_INTR_DISBALE() \
ETS_INTR_DISABLE(ETS_CCOMPARE_INUM)
#define ETS_PWM_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_PWM_INUM)
#define ETS_PWM_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_PWM_INUM)
#define ETS_BB_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_BB_INUM)
#define ETS_BB_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_BB_INUM)
#define ETS_UART_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_UART_INUM)
#define ETS_UART_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_UART_INUM)
#define ETS_GPIO_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_GPIO_INUM)
#define ETS_GPIO_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_GPIO_INUM)
#define ETS_WDT_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_WDT_INUM)
#define ETS_WDT_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_WDT_INUM)
#define ETS_FRC1_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_FRC_TIMER1_INUM)
#define ETS_FRC1_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_FRC_TIMER1_INUM)
#define ETS_FRC2_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_FRC_TIMER2_INUM)
#define ETS_FRC2_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_FRC_TIMER2_INUM)
#define ETS_RTC_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_RTC_INUM)
#define ETS_RTC_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_RTC_INUM)
#define ETS_SLC_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_SLC_INUM)
#define ETS_SLC_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_SLC_INUM)
void ets_delay_us(uint32_t us);
void ets_update_cpu_frequency(uint32_t ticks_per_us);
uint32_t ets_get_xtal_scale();
uint32_t ets_get_detected_xtal_freq();
#if 0
#define isdigit(c) ((c >= '0') && (c <= '9'))
#define isxdigit(c) (((c >= '0') && (c <= '9')) || \
((c >= 'a') && (c <= 'f')) || \
((c >= 'A') && (c <= 'F')) )
#define isblank(c) ((c == ' ') || (c == '\t'))
#define isupper(c) ((c >= 'A') && (c <= 'Z'))
#endif
#ifndef MAC2STR
#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
#endif
#define ETS_MEM_BAR() asm volatile ( "" : : : "memory" )
#ifdef __cplusplus
}
#endif
#endif /* _ROM_ETS_SYS_H_ */