152 lines
6.6 KiB
C
152 lines
6.6 KiB
C
|
/*******************************************************************************
|
||
|
|
|
||
|
|
Copyright (c) 2006-2007 by Tensilica Inc. ALL RIGHTS RESERVED.
|
||
|
|
These coded instructions, statements, and computer programs are the
|
||
|
|
copyrighted works and confidential proprietary information of Tensilica Inc.
|
||
|
|
They may not be modified, copied, reproduced, distributed, or disclosed to
|
||
|
|
third parties in any manner, medium, or form, in whole or in part, without
|
||
|
|
the prior written consent of Tensilica Inc.
|
||
|
|
--------------------------------------------------------------------------------
|
||
|
|
|
||
|
|
lcd-SPLC780D.h Generic definitions for Sunplus SPLC780D LCD Controller
|
||
|
|
|
||
|
|
This is used by board-support-packages with one or more LCD displays that use
|
||
|
|
a SPLC780D controller. A BSP provides a base address for each instance of an
|
||
|
|
SPLC780D LCD controller on the board.
|
||
|
|
|
||
|
|
Note that LCD display operation is almost totally independent of the LCD
|
||
|
|
display, depending almost entirely on the controller. However the display
|
||
|
|
may limit the number of characters of the controller's RAM buffer that are
|
||
|
|
actually visible at one time. The length of the display's visible window
|
||
|
|
is not specifified in this controller-specific header, but comes to the
|
||
|
|
driver from the board-specific "display.h" header.
|
||
|
|
|
||
|
|
*******************************************************************************/
|
||
|
|
|
||
|
|
#ifndef _LCD_SPLC780D_H_
|
||
|
|
#define _LCD_SPLC780D_H_
|
||
|
|
|
||
|
|
|
||
|
|
/* Offsets to controller registers from base. */
|
||
|
|
#define SPLC780D_INST 0
|
||
|
|
#define SPLC780D_DATA (SPLC780D_INST + SPLC780D_REGSPACING)
|
||
|
|
|
||
|
|
/*
|
||
|
|
Bit fields and their values in the instruction register.
|
||
|
|
These fields are NOT orthogonal - they overlap!
|
||
|
|
Thus only one field may be written at a time, determined by the
|
||
|
|
most-significant 1 bit in the pattern (the field selector).
|
||
|
|
All less significant bits are part of the value of the selected field.
|
||
|
|
The fields and their values are grouped together to emphasize this format.
|
||
|
|
Field selector macro names end in '_' (implying something more needs
|
||
|
|
to be ORed) and the value macros are indented. The pattern written to a
|
||
|
|
bitfield is a bitwise OR of a field selector and one or more values, eg.
|
||
|
|
(SPLC780D_INST_ON_ | SPLC780D_INST_ON_DISPLAY | SPLC780D_INST_ON_CURSOR)
|
||
|
|
A single bit field (eg. SPCL780D_INST_HOME) need not have a value.
|
||
|
|
|
||
|
|
NOTE: Controller requires a software delay after writing to the control
|
||
|
|
or data registers. For the data register it is 38us. For the control
|
||
|
|
register it is 38us for most bit fields, with the following exceptions:
|
||
|
|
SPLC780D_FUNC_ 100us.
|
||
|
|
SPLC780D_INST_CLEAR, SPLC780D_INST_HOME 1520us.
|
||
|
|
For more details and reset timing, see the SUNPLUS SPLC780D data sheet.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define SPLC780D_INST_CLEAR_ 0x1 /* clear (blank) display) */
|
||
|
|
|
||
|
|
#define SPLC780D_INST_HOME_ 0x2 /* home cursor and shift pos */
|
||
|
|
|
||
|
|
#define SPLC780D_INST_ENTRY_ 0x4 /* combine *ENTRY_* flags below */
|
||
|
|
#define SPLC780D_INST_ENTRY_SHIFT 0x1 /* display shift on entry / not */
|
||
|
|
#define SPLC780D_INST_ENTRY_INCR 0x2 /* cursor incr / decr */
|
||
|
|
#define SPLC780D_INST_ENTRY_DECR 0 /* cursor incr / decr */
|
||
|
|
|
||
|
|
#define SPLC780D_INST_ON_ 0x8 /* combine *ON_* flags below */
|
||
|
|
#define SPLC780D_INST_ON_DISPLAY 0x4 /* display on / off */
|
||
|
|
#define SPLC780D_INST_ON_CURSOR 0x2 /* cursor on / off */
|
||
|
|
#define SPLC780D_INST_ON_BLINK 0x1 /* blink on / off */
|
||
|
|
|
||
|
|
#define SPLC780D_INST_SHIFT_ 0x10 /* combine *SHIFT_* flags below */
|
||
|
|
#define SPLC780D_INST_SHIFT_DISP 0x8 /* shift display / move cursor */
|
||
|
|
#define SPLC780D_INST_SHIFT_CURS 0 /* shift display / move cursor */
|
||
|
|
#define SPLC780D_INST_SHIFT_RIGHT 0x4 /* shift right / left */
|
||
|
|
#define SPLC780D_INST_SHIFT_LEFT 0 /* shift right / left */
|
||
|
|
|
||
|
|
#define SPLC780D_INST_FUNC_ 0x20 /* combine *FUNC_* flags below */
|
||
|
|
#define SPLC780D_INST_FUNC_8BIT 0x10 /* data length 8 bit / 4 bit */
|
||
|
|
#define SPLC780D_INST_FUNC_4BIT 0 /* data length 8 bit / 4 bit */
|
||
|
|
#define SPLC780D_INST_FUNC_2LINE 0x08 /* display lines 2 / 1 */
|
||
|
|
#define SPLC780D_INST_FUNC_1LINE 0 /* display lines 2 / 1 */
|
||
|
|
#define SPLC780D_INST_FUNC_F5x10 0x04 /* character font 5x10 / 5x8 */
|
||
|
|
#define SPLC780D_INST_FUNC_F5x8 0 /* character font 5x10 / 5x8 */
|
||
|
|
/* font must be 5x8 for 2 lines */
|
||
|
|
#define SPLC780D_INST_CGEN_ 0x40 /* set char generator address */
|
||
|
|
#define SPLC780D_INST_CGEN_ADDR 0x3F /* to address in this field */
|
||
|
|
#define SPLC780D_INST_DRAM_ 0x80 /* set display data RAM address */
|
||
|
|
#define SPLC780D_INST_DRAM_ADDR 0x7F /* to address in this field */
|
||
|
|
#define SPLC780D_INST_DRAM_LINE2 0x40 /* address offset to line 2 */
|
||
|
|
/* Controller limits */
|
||
|
|
#define SPLC780D_RAMLEN_1LINE 0x50 /* length of line in RAM (1 line) */
|
||
|
|
#define SPLC780D_RAMLEN_2LINE 0x28 /* length of line in RAM (2 line) */
|
||
|
|
|
||
|
|
|
||
|
|
#ifndef __ASSEMBLER__
|
||
|
|
|
||
|
|
/* C interface to controller registers. */
|
||
|
|
struct splc780d_s {
|
||
|
|
splc780d_reg_t inst; /* instruction register */
|
||
|
|
splc780d_reg_t data; /* data register */
|
||
|
|
};
|
||
|
|
|
||
|
|
typedef volatile struct splc780d_s splc780d_t;
|
||
|
|
|
||
|
|
/*
|
||
|
|
Prototypes of high level driver functions.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
Initialize the display with the FUNC_, ENTRY_ and ON_ fields as specified in
|
||
|
|
terms of the values above. The splc780d_init_default() macro is an example.
|
||
|
|
*/
|
||
|
|
extern void splc780d_init(splc780d_t *lcd,
|
||
|
|
unsigned func, unsigned entry, unsigned on);
|
||
|
|
|
||
|
|
/*
|
||
|
|
Initialize the display to default mode: 8-bit interface, 2 line, 5x8 font,
|
||
|
|
increment cursor on entry, display on (cursor and blinking off).
|
||
|
|
*/
|
||
|
|
#define splc780d_init_default(lcd) \
|
||
|
|
splc780d_init( lcd, \
|
||
|
|
SPLC780D_INST_FUNC_8BIT \
|
||
|
|
| SPLC780D_INST_FUNC_2LINE \
|
||
|
|
| SPLC780D_INST_FUNC_F5x8, \
|
||
|
|
SPLC780D_INST_ENTRY_INCR, \
|
||
|
|
SPLC780D_INST_ON_DISPLAY \
|
||
|
|
)
|
||
|
|
|
||
|
|
/*
|
||
|
|
Write a single character at a given position (chars from left, starting at 0).
|
||
|
|
Wait long enough afterward for the controller to be ready for more input.
|
||
|
|
Positions beyond the end of the display are ignored.
|
||
|
|
*/
|
||
|
|
extern void splc780d_write_char(splc780d_t *lcd, unsigned pos, const char c);
|
||
|
|
|
||
|
|
/*
|
||
|
|
Write a string to the display starting at the left (position 0).
|
||
|
|
Blank-pad to or truncate at the end of the display (overwrites any previous
|
||
|
|
string so don't need to blank the display first).
|
||
|
|
Wait long enough after each char for the controller to be ready for more input.
|
||
|
|
*/
|
||
|
|
extern void splc780d_write_string(splc780d_t *lcd, const char *s);
|
||
|
|
|
||
|
|
/*
|
||
|
|
Blank (clear) the entire display.
|
||
|
|
Wait long enough afterward for the controller to be ready for more input.
|
||
|
|
*/
|
||
|
|
extern void splc780d_blank(splc780d_t *lcd);
|
||
|
|
|
||
|
|
#endif /* __ASSEMBLER__ */
|
||
|
|
|
||
|
|
#endif /* _LCD_SPLC780D_H_ */
|
||
|
|
|