17 lines
1.2 KiB
Markdown
17 lines
1.2 KiB
Markdown
|
ESP BLE Mesh Node demo
|
|||
|
|
==========================
|
|||
|
|
|
|||
|
|
This demo shows how BLE Mesh device can be set up as a node with the following features:
|
|||
|
|
|
|||
|
|
- One element
|
|||
|
|
- Two SIG models
|
|||
|
|
- **Configuration Server model**: The role of this model is mainly to configure Provisioner device’s AppKey and set up its relay function, TTL size, subscription, etc.
|
|||
|
|
- **OnOff Server model**: This model implements the most basic function of turning the lights on and off.
|
|||
|
|
|
|||
|
|
The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: `make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...`
|
|||
|
|
|
|||
|
|
For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO\_NUM\_25, GPIO\_NUM\_26, GPIO\_NUM\_27. Then you need to select the following option in menuconfig:
|
|||
|
|
`make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32`
|
|||
|
|
|
|||
|
|
Please check the [tutorial](tutorial/Ble_Mesh_Node_Example_Walkthrough.md) for more information about this example.
|