OVMS3-idf/components/driver/test/test_uart.c

129 lines
4.6 KiB
C
Raw Normal View History

#include <string.h>
2018-07-17 11:10:33 +00:00
#include <sys/param.h>
#include "unity.h"
#include "test_utils.h" // unity_send_signal
#include "driver/uart.h" // for the uart driver access
#include "esp_log.h"
#include "esp_system.h" // for uint32_t esp_random()
#define UART_TAG "Uart"
#define UART_NUM1 (UART_NUM_1)
#define BUF_SIZE (100)
#define UART1_RX_PIN (22)
#define UART1_TX_PIN (23)
#define UART_BAUD_11520 (11520)
#define UART_BAUD_115200 (115200)
#define TOLERANCE (0.02) //baud rate error tolerance 2%.
#define UART_TOLERANCE_CHECK(val, uper_limit, lower_limit) ( (val) <= (uper_limit) && (val) >= (lower_limit) )
// RTS for RS485 Half-Duplex Mode manages DE/~RE
#define UART1_RTS_PIN (18)
// Number of packets to be send during test
#define PACKETS_NUMBER (10)
// Wait timeout for uart driver
#define PACKET_READ_TICS (1000 / portTICK_RATE_MS)
static void uart_config(uint32_t baud_rate, bool use_ref_tick)
{
uart_config_t uart_config = {
.baud_rate = baud_rate,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
};
2019-04-17 12:19:44 +00:00
uart_config.source_clk = use_ref_tick ? UART_SCLK_REF_TICK : UART_SCLK_APB;
uart_driver_install(UART_NUM1, BUF_SIZE * 2, BUF_SIZE * 2, 20, NULL, 0);
uart_param_config(UART_NUM1, &uart_config);
uart_set_pin(UART_NUM1, UART1_TX_PIN, UART1_RX_PIN, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
}
static volatile bool exit_flag;
static void test_task(void *pvParameters)
{
xSemaphoreHandle *sema = (xSemaphoreHandle *) pvParameters;
char* data = (char *) malloc(256);
while (exit_flag == false) {
uart_tx_chars(UART_NUM1, data, 256);
// The uart_wait_tx_done() function does not block anything if ticks_to_wait = 0.
uart_wait_tx_done(UART_NUM1, 0);
}
free(data);
xSemaphoreGive(*sema);
vTaskDelete(NULL);
}
static void test_task2(void *pvParameters)
{
while (exit_flag == false) {
// This task obstruct a setting tx_done_sem semaphore in the UART interrupt.
// It leads to waiting the ticks_to_wait time in uart_wait_tx_done() function.
2019-04-17 12:19:44 +00:00
uart_disable_tx_intr(UART_NUM1);
}
vTaskDelete(NULL);
}
TEST_CASE("test uart_wait_tx_done is not blocked when ticks_to_wait=0", "[uart]")
{
uart_config(UART_BAUD_11520, false);
xSemaphoreHandle exit_sema = xSemaphoreCreateBinary();
exit_flag = false;
xTaskCreate(test_task, "tsk1", 2048, &exit_sema, 5, NULL);
xTaskCreate(test_task2, "tsk2", 2048, NULL, 5, NULL);
printf("Waiting for 5 sec\n");
vTaskDelay(5000 / portTICK_PERIOD_MS);
exit_flag = true;
if (xSemaphoreTake(exit_sema, 1000 / portTICK_PERIOD_MS) == pdTRUE) {
vSemaphoreDelete(exit_sema);
} else {
TEST_FAIL_MESSAGE("uart_wait_tx_done is blocked");
}
TEST_ESP_OK(uart_driver_delete(UART_NUM1));
}
TEST_CASE("test uart get baud-rate", "[uart]")
{
uint32_t baud_rate1 = 0;
uint32_t baud_rate2 = 0;
printf("init uart%d, use reftick, baud rate : %d\n", (int)UART_NUM1, (int)UART_BAUD_11520);
uart_config(UART_BAUD_11520, true);
uart_get_baudrate(UART_NUM1, &baud_rate1);
printf("init uart%d, unuse reftick, baud rate : %d\n", (int)UART_NUM1, (int)UART_BAUD_115200);
uart_config(UART_BAUD_115200, false);
uart_get_baudrate(UART_NUM1, &baud_rate2);
printf("get baud rate when use reftick: %d\n", (int)baud_rate1);
printf("get baud rate when don't use reftick: %d\n", (int)baud_rate2);
uart_driver_delete(UART_NUM1);
TEST_ASSERT(UART_TOLERANCE_CHECK(baud_rate1, (1.0 + TOLERANCE)*UART_BAUD_11520, (1.0 - TOLERANCE)*UART_BAUD_11520))
TEST_ASSERT(UART_TOLERANCE_CHECK(baud_rate2, (1.0 + TOLERANCE)*UART_BAUD_115200, (1.0 - TOLERANCE)*UART_BAUD_115200))
ESP_LOGI(UART_TAG, "get baud-rate test passed ....\n");
}
TEST_CASE("test uart tx data with break", "[uart]")
{
const int buf_len = 200;
const int send_len = 128;
const int brk_len = 10;
char *psend = (char *)malloc(buf_len);
TEST_ASSERT(psend != NULL);
memset(psend, '0', buf_len);
uart_config(UART_BAUD_115200, false);
printf("Uart%d send %d bytes with break\n", UART_NUM1, send_len);
uart_write_bytes_with_break(UART_NUM1, (const char *)psend, send_len, brk_len);
uart_wait_tx_done(UART_NUM1, (portTickType)portMAX_DELAY);
//If the code is running here, it means the test passed, otherwise it will crash due to the interrupt wdt timeout.
printf("Send data with break test passed\n");
free(psend);
uart_driver_delete(UART_NUM1);
}