OVMS3-idf/components/wpa_supplicant/include/wpa/wpa_i.h

90 lines
3.7 KiB
C
Raw Normal View History

/*
* Internal WPA/RSN supplicant state machine definitions
* Copyright (c) 2004-2010, Jouni Malinen <j@w1.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Alternatively, this software may be distributed under the terms of BSD
* license.
*
* See README and COPYING for more details.
*/
#ifndef WPA_I_H
#define WPA_I_H
/**
* set_key - Configure encryption key
* @ifname: Interface name (for multi-SSID/VLAN support)
* @priv: private driver interface data
* @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP,
* %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK);
* %WPA_ALG_NONE clears the key.
* @addr: address of the peer STA or ff:ff:ff:ff:ff:ff for
* broadcast/default keys
* @key_idx: key index (0..3), usually 0 for unicast keys; 0..4095 for
* IGTK
* @set_tx: configure this key as the default Tx key (only used when
* driver does not support separate unicast/individual key
* @seq: sequence number/packet number, seq_len octets, the next
* packet number to be used for in replay protection; configured
* for Rx keys (in most cases, this is only used with broadcast
* keys and set to zero for unicast keys)
* @seq_len: length of the seq, depends on the algorithm:
* TKIP: 6 octets, CCMP: 6 octets, IGTK: 6 octets
* @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key,
* 8-byte Rx Mic Key
* @key_len: length of the key buffer in octets (WEP: 5 or 13,
* TKIP: 32, CCMP: 16, IGTK: 16)
*
* Returns: 0 on success, -1 on failure
*
* Configure the given key for the kernel driver. If the driver
* supports separate individual keys (4 default keys + 1 individual),
* addr can be used to determine whether the key is default or
* individual. If only 4 keys are supported, the default key with key
* index 0 is used as the individual key. STA must be configured to use
* it as the default Tx key (set_tx is set) and accept Rx for all the
* key indexes. In most cases, WPA uses only key indexes 1 and 2 for
* broadcast keys, so key index 0 is available for this kind of
* configuration.
*
* Please note that TKIP keys include separate TX and RX MIC keys and
* some drivers may expect them in different order than wpa_supplicant
* is using. If the TX/RX keys are swapped, all TKIP encrypted packets
* will tricker Michael MIC errors. This can be fixed by changing the
* order of MIC keys by swapping te bytes 16..23 and 24..31 of the key
* in driver_*.c set_key() implementation, see driver_ndis.c for an
* example on how this can be done.
*/
typedef void (* WPA_SEND_FUNC)(struct pbuf *pb);
typedef void (* WPA_SET_ASSOC_IE)(uint8 proto, u8 *assoc_buf, u32 assoc_wpa_ie_len);
typedef void (*WPA_INSTALL_KEY) (enum wpa_alg alg, uint8 *addr, int key_idx, int set_tx,
uint8 *seq, size_t seq_len, uint8 *key, size_t key_len, int key_entry_valid);
typedef void (*WPA_DEAUTH)(uint8 reason_code);
typedef void (*WPA_NEG_COMPLETE)();
void wpa_register(char * payload, WPA_SEND_FUNC snd_func, \
WPA_SET_ASSOC_IE set_assoc_ie_func, \
WPA_INSTALL_KEY ppinstallkey, \
WPA_DEAUTH wpa_deauth, \
WPA_NEG_COMPLETE wpa_neg_complete);
#include "pp/esf_buf.h"
void eapol_txcb(esf_buf_t *eb);
void wpa_set_profile(uint32 wpa_proto);
void wpa_set_bss(char *macddr, char * bssid, uint8 pairwise_cipher, uint8 group_cipher, char *passphrase, u8 *ssid, size_t ssid_len);
int wpa_sm_rx_eapol(u8 *src_addr, u8 *buf, u32 len);
#endif /* WPA_I_H */