OVMS3-idf/components/esp32/include/xtensa/lcd-splc780d.h

152 lines
6.6 KiB
C
Raw Normal View History

2016-08-17 15:08:22 +00:00
/*******************************************************************************
Copyright (c) 2006-2007 by Tensilica Inc. ALL RIGHTS RESERVED.
These coded instructions, statements, and computer programs are the
copyrighted works and confidential proprietary information of Tensilica Inc.
They may not be modified, copied, reproduced, distributed, or disclosed to
third parties in any manner, medium, or form, in whole or in part, without
the prior written consent of Tensilica Inc.
--------------------------------------------------------------------------------
lcd-SPLC780D.h Generic definitions for Sunplus SPLC780D LCD Controller
This is used by board-support-packages with one or more LCD displays that use
a SPLC780D controller. A BSP provides a base address for each instance of an
SPLC780D LCD controller on the board.
Note that LCD display operation is almost totally independent of the LCD
display, depending almost entirely on the controller. However the display
may limit the number of characters of the controller's RAM buffer that are
actually visible at one time. The length of the display's visible window
is not specifified in this controller-specific header, but comes to the
driver from the board-specific "display.h" header.
*******************************************************************************/
#ifndef _LCD_SPLC780D_H_
#define _LCD_SPLC780D_H_
/* Offsets to controller registers from base. */
#define SPLC780D_INST 0
#define SPLC780D_DATA (SPLC780D_INST + SPLC780D_REGSPACING)
/*
Bit fields and their values in the instruction register.
These fields are NOT orthogonal - they overlap!
Thus only one field may be written at a time, determined by the
most-significant 1 bit in the pattern (the field selector).
All less significant bits are part of the value of the selected field.
The fields and their values are grouped together to emphasize this format.
Field selector macro names end in '_' (implying something more needs
to be ORed) and the value macros are indented. The pattern written to a
bitfield is a bitwise OR of a field selector and one or more values, eg.
(SPLC780D_INST_ON_ | SPLC780D_INST_ON_DISPLAY | SPLC780D_INST_ON_CURSOR)
A single bit field (eg. SPCL780D_INST_HOME) need not have a value.
NOTE: Controller requires a software delay after writing to the control
or data registers. For the data register it is 38us. For the control
register it is 38us for most bit fields, with the following exceptions:
SPLC780D_FUNC_ 100us.
SPLC780D_INST_CLEAR, SPLC780D_INST_HOME 1520us.
For more details and reset timing, see the SUNPLUS SPLC780D data sheet.
*/
#define SPLC780D_INST_CLEAR_ 0x1 /* clear (blank) display) */
#define SPLC780D_INST_HOME_ 0x2 /* home cursor and shift pos */
#define SPLC780D_INST_ENTRY_ 0x4 /* combine *ENTRY_* flags below */
#define SPLC780D_INST_ENTRY_SHIFT 0x1 /* display shift on entry / not */
#define SPLC780D_INST_ENTRY_INCR 0x2 /* cursor incr / decr */
#define SPLC780D_INST_ENTRY_DECR 0 /* cursor incr / decr */
#define SPLC780D_INST_ON_ 0x8 /* combine *ON_* flags below */
#define SPLC780D_INST_ON_DISPLAY 0x4 /* display on / off */
#define SPLC780D_INST_ON_CURSOR 0x2 /* cursor on / off */
#define SPLC780D_INST_ON_BLINK 0x1 /* blink on / off */
#define SPLC780D_INST_SHIFT_ 0x10 /* combine *SHIFT_* flags below */
#define SPLC780D_INST_SHIFT_DISP 0x8 /* shift display / move cursor */
#define SPLC780D_INST_SHIFT_CURS 0 /* shift display / move cursor */
#define SPLC780D_INST_SHIFT_RIGHT 0x4 /* shift right / left */
#define SPLC780D_INST_SHIFT_LEFT 0 /* shift right / left */
#define SPLC780D_INST_FUNC_ 0x20 /* combine *FUNC_* flags below */
#define SPLC780D_INST_FUNC_8BIT 0x10 /* data length 8 bit / 4 bit */
#define SPLC780D_INST_FUNC_4BIT 0 /* data length 8 bit / 4 bit */
#define SPLC780D_INST_FUNC_2LINE 0x08 /* display lines 2 / 1 */
#define SPLC780D_INST_FUNC_1LINE 0 /* display lines 2 / 1 */
#define SPLC780D_INST_FUNC_F5x10 0x04 /* character font 5x10 / 5x8 */
#define SPLC780D_INST_FUNC_F5x8 0 /* character font 5x10 / 5x8 */
/* font must be 5x8 for 2 lines */
#define SPLC780D_INST_CGEN_ 0x40 /* set char generator address */
#define SPLC780D_INST_CGEN_ADDR 0x3F /* to address in this field */
#define SPLC780D_INST_DRAM_ 0x80 /* set display data RAM address */
#define SPLC780D_INST_DRAM_ADDR 0x7F /* to address in this field */
#define SPLC780D_INST_DRAM_LINE2 0x40 /* address offset to line 2 */
/* Controller limits */
#define SPLC780D_RAMLEN_1LINE 0x50 /* length of line in RAM (1 line) */
#define SPLC780D_RAMLEN_2LINE 0x28 /* length of line in RAM (2 line) */
#ifndef __ASSEMBLER__
/* C interface to controller registers. */
struct splc780d_s {
splc780d_reg_t inst; /* instruction register */
splc780d_reg_t data; /* data register */
};
typedef volatile struct splc780d_s splc780d_t;
/*
Prototypes of high level driver functions.
*/
/*
Initialize the display with the FUNC_, ENTRY_ and ON_ fields as specified in
terms of the values above. The splc780d_init_default() macro is an example.
*/
extern void splc780d_init(splc780d_t *lcd,
unsigned func, unsigned entry, unsigned on);
/*
Initialize the display to default mode: 8-bit interface, 2 line, 5x8 font,
increment cursor on entry, display on (cursor and blinking off).
*/
#define splc780d_init_default(lcd) \
splc780d_init( lcd, \
SPLC780D_INST_FUNC_8BIT \
| SPLC780D_INST_FUNC_2LINE \
| SPLC780D_INST_FUNC_F5x8, \
SPLC780D_INST_ENTRY_INCR, \
SPLC780D_INST_ON_DISPLAY \
)
/*
Write a single character at a given position (chars from left, starting at 0).
Wait long enough afterward for the controller to be ready for more input.
Positions beyond the end of the display are ignored.
*/
extern void splc780d_write_char(splc780d_t *lcd, unsigned pos, const char c);
/*
Write a string to the display starting at the left (position 0).
Blank-pad to or truncate at the end of the display (overwrites any previous
string so don't need to blank the display first).
Wait long enough after each char for the controller to be ready for more input.
*/
extern void splc780d_write_string(splc780d_t *lcd, const char *s);
/*
Blank (clear) the entire display.
Wait long enough afterward for the controller to be ready for more input.
*/
extern void splc780d_blank(splc780d_t *lcd);
#endif /* __ASSEMBLER__ */
#endif /* _LCD_SPLC780D_H_ */