OVMS3-idf/examples/bluetooth/a2dp_sink/main/main.c

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "nvs.h"
#include "nvs_flash.h"
#include "esp_system.h"
#include "esp_log.h"

#include "esp_bt.h"
#include "bt_app_core.h"
#include "bt_app_av.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_gap_bt_api.h"
#include "esp_a2dp_api.h"
#include "esp_avrc_api.h"
#include "driver/i2s.h"

/* event for handler "bt_av_hdl_stack_up */
enum {
    BT_APP_EVT_STACK_UP = 0,
};

/* handler for bluetooth stack enabled events */
static void bt_av_hdl_stack_evt(uint16_t event, void *p_param);


void app_main()
{
    /* Initialize NVS — it is used to store PHY calibration data */
    esp_err_t ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK( ret );

    i2s_config_t i2s_config = {
#ifdef CONFIG_A2DP_SINK_OUTPUT_INTERNAL_DAC
        .mode = I2S_MODE_DAC_BUILT_IN,
#else
        .mode = I2S_MODE_MASTER | I2S_MODE_TX,                                  // Only TX
#endif
        .sample_rate = 44100,
        .bits_per_sample = 16,                                              
        .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,                           //2-channels
        .communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
        .dma_buf_count = 6,
        .dma_buf_len = 60,                                                      //
        .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1                                //Interrupt level 1
    };


    i2s_driver_install(0, &i2s_config, 0, NULL);
#ifdef CONFIG_A2DP_SINK_OUTPUT_INTERNAL_DAC
    i2s_set_pin(0, NULL);
#else
    i2s_pin_config_t pin_config = {
        .bck_io_num = CONFIG_I2S_BCK_PIN,
        .ws_io_num = CONFIG_I2S_LRCK_PIN,
        .data_out_num = CONFIG_I2S_DATA_PIN,
        .data_in_num = -1                                                       //Not used
    };

    i2s_set_pin(0, &pin_config);
#endif


    ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_BLE));

    esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
    if (esp_bt_controller_init(&bt_cfg) != ESP_OK) {
        ESP_LOGE(BT_AV_TAG, "%s initialize controller failed\n", __func__);
        return;
    }

    if (esp_bt_controller_enable(ESP_BT_MODE_CLASSIC_BT) != ESP_OK) {
        ESP_LOGE(BT_AV_TAG, "%s enable controller failed\n", __func__);
        return;
    }

    if (esp_bluedroid_init() != ESP_OK) {
        ESP_LOGE(BT_AV_TAG, "%s initialize bluedroid failed\n", __func__);
        return;
    }

    if (esp_bluedroid_enable() != ESP_OK) {
        ESP_LOGE(BT_AV_TAG, "%s enable bluedroid failed\n", __func__);
        return;
    }

    /* create application task */
    bt_app_task_start_up();

    /* Bluetooth device name, connection mode and profile set up */
    bt_app_work_dispatch(bt_av_hdl_stack_evt, BT_APP_EVT_STACK_UP, NULL, 0, NULL);
}


static void bt_av_hdl_stack_evt(uint16_t event, void *p_param)
{
    ESP_LOGD(BT_AV_TAG, "%s evt %d", __func__, event);
    switch (event) {
    case BT_APP_EVT_STACK_UP: {
        /* set up device name */
        char *dev_name = "ESP_SPEAKER";
        esp_bt_dev_set_device_name(dev_name);

        /* initialize A2DP sink */
        esp_a2d_register_callback(&bt_app_a2d_cb);
        esp_a2d_register_data_callback(bt_app_a2d_data_cb);
        esp_a2d_sink_init();

        /* initialize AVRCP controller */
        esp_avrc_ct_init();
        esp_avrc_ct_register_callback(bt_app_rc_ct_cb);

        /* set discoverable and connectable mode, wait to be connected */
        esp_bt_gap_set_scan_mode(ESP_BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
        break;
    }
    default:
        ESP_LOGE(BT_AV_TAG, "%s unhandled evt %d", __func__, event);
        break;
    }
}