OVMS3-idf/components/esp32/int_wdt.c

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.



#include "sdkconfig.h"
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include <esp_types.h>
#include "esp_err.h"
#include "esp_intr.h"
#include "esp_attr.h"
#include "esp_freertos_hooks.h"
#include "soc/timer_group_struct.h"
#include "soc/timer_group_reg.h"
#include "driver/timer.h"
#include "driver/periph_ctrl.h"
#include "esp_int_wdt.h"

#if CONFIG_INT_WDT


#define WDT_INT_NUM ETS_T1_WDT_INUM

#if !defined(CONFIG_FREERTOS_UNICORE) && defined(CONFIG_SPIRAM_SUPPORT)
/*
 * This parameter is indicates the response time of tg1 watchdog to
 * identify the live lock,
 */
#define TG1_WDT_LIVELOCK_TIMEOUT_MS    (20)

extern uint32_t _l4_intr_livelock_counter, _l4_intr_livelock_max;
#endif

//Take care: the tick hook can also be called before esp_int_wdt_init() is called.
#if CONFIG_INT_WDT_CHECK_CPU1
//Not static; the ISR assembly checks this.
bool int_wdt_app_cpu_ticked=false;

static void IRAM_ATTR tick_hook(void) {
    if (xPortGetCoreID()!=0) {
        int_wdt_app_cpu_ticked=true;
    } else {
        //Only feed wdt if app cpu also ticked.
        if (int_wdt_app_cpu_ticked) {
            TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
#if CONFIG_ESP32_ECO3_CACHE_LOCK_FIX
            _l4_intr_livelock_counter = 0;
            TIMERG1.wdt_config2=CONFIG_INT_WDT_TIMEOUT_MS*2/(_l4_intr_livelock_max+1);  //Set timeout before interrupt
#else
            TIMERG1.wdt_config2=CONFIG_INT_WDT_TIMEOUT_MS*2;        //Set timeout before interrupt
#endif
            TIMERG1.wdt_config3=CONFIG_INT_WDT_TIMEOUT_MS*4;        //Set timeout before reset
            TIMERG1.wdt_feed=1;
            TIMERG1.wdt_wprotect=0;
            int_wdt_app_cpu_ticked=false;
        }
    }
}
#else
static void IRAM_ATTR tick_hook(void) {
    if (xPortGetCoreID()!=0) return;
    TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
    TIMERG1.wdt_config2=CONFIG_INT_WDT_TIMEOUT_MS*2;        //Set timeout before interrupt
    TIMERG1.wdt_config3=CONFIG_INT_WDT_TIMEOUT_MS*4;        //Set timeout before reset
    TIMERG1.wdt_feed=1;
    TIMERG1.wdt_wprotect=0;
}
#endif


void esp_int_wdt_init() {
    periph_module_enable(PERIPH_TIMG1_MODULE);
    TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
    TIMERG1.wdt_config0.sys_reset_length=7;                 //3.2uS
    TIMERG1.wdt_config0.cpu_reset_length=7;                 //3.2uS
    TIMERG1.wdt_config0.level_int_en=1;
    TIMERG1.wdt_config0.stg0=TIMG_WDT_STG_SEL_INT;          //1st stage timeout: interrupt
    TIMERG1.wdt_config0.stg1=TIMG_WDT_STG_SEL_RESET_SYSTEM; //2nd stage timeout: reset system
    TIMERG1.wdt_config1.clk_prescale=80*500;                //Prescaler: wdt counts in ticks of 0.5mS
    //The timer configs initially are set to 5 seconds, to make sure the CPU can start up. The tick hook sets
    //it to their actual value.
    TIMERG1.wdt_config2=10000;
    TIMERG1.wdt_config3=10000;
    TIMERG1.wdt_config0.en=1;
    TIMERG1.wdt_feed=1;
    TIMERG1.wdt_wprotect=0;
    TIMERG1.int_clr_timers.wdt=1;
    timer_group_intr_enable(TIMER_GROUP_1, TIMG_WDT_INT_ENA_M);
}

void esp_int_wdt_cpu_init()
{
    assert((CONFIG_INT_WDT_TIMEOUT_MS >= (portTICK_PERIOD_MS<<1)) && "Interrupt watchdog timeout needs to meet double SysTick period!");
    esp_register_freertos_tick_hook_for_cpu(tick_hook, xPortGetCoreID());
    ESP_INTR_DISABLE(WDT_INT_NUM);
    intr_matrix_set(xPortGetCoreID(), ETS_TG1_WDT_LEVEL_INTR_SOURCE, WDT_INT_NUM);
#if CONFIG_ESP32_ECO3_CACHE_LOCK_FIX
    /*
     * This is a workaround for issue 3.15 in "ESP32 ECO and Workarounds for Bugs" document.
     */
    _l4_intr_livelock_max = 0;
    if (soc_has_cache_lock_bug()) {
        assert((portTICK_PERIOD_MS<<1) <= TG1_WDT_LIVELOCK_TIMEOUT_MS);
        assert(CONFIG_INT_WDT_TIMEOUT_MS >= (TG1_WDT_LIVELOCK_TIMEOUT_MS*3));
        _l4_intr_livelock_max = CONFIG_INT_WDT_TIMEOUT_MS/TG1_WDT_LIVELOCK_TIMEOUT_MS - 1;
    }
#endif
    //We do not register a handler for the interrupt because it is interrupt level 4 which
    //is not servicable from C. Instead, xtensa_vectors.S has a call to the panic handler for
    //this interrupt.
    ESP_INTR_ENABLE(WDT_INT_NUM);
}



#endif