OVMS3-idf/examples/peripherals/adc/main/adc1_example_main.c

52 lines
1.6 KiB
C
Raw Normal View History

/* ADC1 Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <stdlib.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "driver/gpio.h"
#include "driver/adc.h"
#include "esp_system.h"
#include "esp_adc_cal.h"
/*Note: Different ESP32 modules may have different reference voltages varying from
* 1000mV to 1200mV. Use #define GET_VREF to route v_ref to a GPIO
*/
#define V_REF 1100
#define ADC1_TEST_CHANNEL (ADC1_CHANNEL_6) //GPIO 34
//#define V_REF_TO_GPIO //Remove comment on define to route v_ref to GPIO
void app_main(void)
{
#ifndef V_REF_TO_GPIO
//Init ADC and Characteristics
esp_adc_cal_characteristics_t characteristics;
adc1_config_width(ADC_WIDTH_12Bit);
adc1_config_channel_atten(ADC1_TEST_CHANNEL, ADC_ATTEN_0db);
esp_adc_cal_get_characteristics(V_REF, ADC_ATTEN_0db, ADC_WIDTH_12Bit, &characteristics);
uint32_t voltage;
while(1){
voltage = adc1_to_voltage(ADC1_TEST_CHANNEL, &characteristics);
printf("%d mV\n",voltage);
vTaskDelay(pdMS_TO_TICKS(1000));
}
#else
//Get v_ref
esp_err_t status;
status = adc2_vref_to_gpio(GPIO_NUM_25);
if (status == ESP_OK){
printf("v_ref routed to GPIO\n");
}else{
printf("failed to route v_ref\n");
}
fflush(stdout);
#endif
}