OVMS3-idf/components/esp32/include/esp_system.h

202 lines
5.1 KiB
C
Raw Normal View History

2016-08-17 15:08:22 +00:00
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SYSTEM_H__
#define __ESP_SYSTEM_H__
#include <stdint.h>
#include "esp_err.h"
2016-08-17 15:08:22 +00:00
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup System_APIs System APIs
* @brief System APIs
*/
/** @addtogroup System_APIs
* @{
*/
/**
* @brief Get information of the SDK version.
*
* @param null
*
* @return Information of the SDK version.
*/
const char *system_get_sdk_version(void);
/**
* @brief Reset to default settings.
*
* Reset to default settings of the following APIs : wifi_station_set_auto_connect,
* wifi_set_phy_mode, wifi_softap_set_config related, wifi_station_set_config
* related, and wifi_set_opmode.
*
* @param null
*
* @return null
*/
void system_restore(void);
/**
* @brief Restart system.
*
* @param null
*
* @return null
*/
void system_restart(void);
/**
* @brief Set the chip to deep-sleep mode.
*
* The device will automatically wake up after the deep-sleep time set
* by the users. Upon waking up, the device boots up from user_init.
*
* @attention The parameter time_in_us to be "uint64" is for further development.
* Only the low 32 bits of parameter time_in_us are avalable now.
*
* @param uint64 time_in_us : deep-sleep time, only the low 32bits are avalable now. unit: microsecond
*
* @return null
*/
void system_deep_sleep(uint64_t time_in_us);
/**
* @brief Get system time, unit: microsecond.
*
* @param null
*
* @return System time, unit: microsecond.
*/
uint32_t system_get_time(void);
/**
* @brief Get the size of available heap.
*
* @param null
*
* @return Available heap size.
*/
uint32_t system_get_free_heap_size(void);
/**
* @brief Get RTC time, unit: RTC clock cycle.
*
* @param null
*
* @return RTC time.
*/
uint64_t system_get_rtc_time(void);
/**
* @brief Read user data from the RTC memory.
*
* The user data segment (1024 bytes, as shown below) is used to store user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when reading data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_read(uint16_t src, void *dst, uint16_t n);
/**
* @brief Write user data to the RTC memory.
*
* During deep-sleep, only RTC is working. So users can store their data
* in RTC memory if it is needed. The user data segment below (1024 bytes)
* is used to store the user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when storing data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_write(uint16_t dst, const void *src, uint16_t n);
/** \defgroup System_boot_APIs Boot APIs
* @brief boot APIs
*/
/** @addtogroup System_boot_APIs
* @{
*/
/**
* @}
*/
/** \defgroup Hardware_MAC_APIs Hardware MAC APIs
* @brief Hardware MAC address APIs
*
* In WiFi MAC, only ESP32 station MAC is the hardware MAC, ESP32 softAP MAC is a software MAC
* calculated from ESP32 station MAC.
* So users need to call wifi_get_macaddr to query the ESP32 softAP MAC if ESP32 station MAC changed.
*
*/
/** @addtogroup Hardware_MAC_APIs
* @{
*/
/**
* @brief Read hardware MAC address.
*
* @param uint8 mac[6] : the hardware MAC address, length: 6 bytes.
2016-08-17 15:08:22 +00:00
*
* @return esp_err_t
2016-08-17 15:08:22 +00:00
*/
esp_err_t system_efuse_read_mac(uint8_t mac[6]);
2016-08-17 15:08:22 +00:00
void system_init(void);
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __ESP_SYSTEM_H__ */