OVMS3-idf/examples/peripherals/mcpwm/mcpwm_brushed_dc_control/README.md

# MCPWM brushed dc motor control Example

This example will show you how to use MCPWM module to control brushed dc motor, you need to make connection between ESP32 and motor driver
 
This code is tested with L298 motor driver, user needs to make changes according to the driver they use
 
Motor first moves forward, then backward and then stops for 2 Secs each countinuously


## Step 1: Pin assignment
* GPIO15 is assigned as the enable/input 1 for motor driver
* GPIO16 is assigned as the enable/input 2 for motor driver


## Step 2: Connection
* connect GPIO15 with input 1 of motor driver
* connect GPIO16 with input 2 of motor driver


## Step 3: Initialize MCPWM
* You need to set the frequency and duty cycle of MCPWM timer
* You need to set the MCPWM unit you want to use, and bind the unit with one of the timers
feature: add Motor Control PWM(mcpwm) driver 1. Name change from chopper to carrier, block diagram update, minor changes to example codes 2. mcpwm_reg.h changed, brought uniformity in comments, worked on suggestions, duty to accept float. Some name changes! 3. Minor readme changes and Indetation 4. Minor change: move mcpwm_reg.h and mcpwm_struct.h to new path 5. Minor change: addition of BLDC example code and Readme 6. Name changed from epwm to mcpwm 7. Improve the reg name in mcpwm_struct.h 8. Name change chopper>carrier, deadband>deadtime 2017-03-29 08:39:35 +00:00			`# MCPWM brushed dc motor control Example`

			`This example will show you how to use MCPWM module to control brushed dc motor, you need to make connection between ESP32 and motor driver`

			`This code is tested with L298 motor driver, user needs to make changes according to the driver they use`

			`Motor first moves forward, then backward and then stops for 2 Secs each countinuously`


			`## Step 1: Pin assignment`
MCPWM API doc update 2018-10-10 00:15:23 +00:00			`* GPIO15 is assigned as the enable/input 1 for motor driver`
feature: add Motor Control PWM(mcpwm) driver 1. Name change from chopper to carrier, block diagram update, minor changes to example codes 2. mcpwm_reg.h changed, brought uniformity in comments, worked on suggestions, duty to accept float. Some name changes! 3. Minor readme changes and Indetation 4. Minor change: move mcpwm_reg.h and mcpwm_struct.h to new path 5. Minor change: addition of BLDC example code and Readme 6. Name changed from epwm to mcpwm 7. Improve the reg name in mcpwm_struct.h 8. Name change chopper>carrier, deadband>deadtime 2017-03-29 08:39:35 +00:00			`* GPIO16 is assigned as the enable/input 2 for motor driver`


			`## Step 2: Connection`
			`* connect GPIO15 with input 1 of motor driver`
			`* connect GPIO16 with input 2 of motor driver`


			`## Step 3: Initialize MCPWM`
			`* You need to set the frequency and duty cycle of MCPWM timer`
MCPWM API doc update 2018-10-10 00:15:23 +00:00			`* You need to set the MCPWM unit you want to use, and bind the unit with one of the timers`