OVMS3-idf/examples/protocols/websocket/README.md

63 lines
1.8 KiB
Markdown
Raw Normal View History

# Websocket Sample application
(See the README.md file in the upper level 'examples' directory for more information about examples.)
This example will shows how to set up and communicate over a websocket.
## How to Use Example
### Hardware Required
This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet or a local server.
### Configure the project
```
make menuconfig
```
* Set serial port under Serial Flasher Options.
* Set ssid and password for the board to connect to AP.
### Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
```
make -j4 flash monitor
```
(To exit the serial monitor, type ``Ctrl-]``.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
## Example Output
```
I (482) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (2492) example_connect: Ethernet Link Up
I (4472) tcpip_adapter: eth ip: 192.168.2.137, mask: 255.255.255.0, gw: 192.168.2.2
I (4472) example_connect: Connected to Ethernet
I (4472) example_connect: IPv4 address: 192.168.2.137
I (4472) example_connect: IPv6 address: fe80:0000:0000:0000:bedd:c2ff:fed4:a92b
I (4482) WEBSOCKET: Connecting to ws://echo.websocket.org...
I (5012) WEBSOCKET: WEBSOCKET_EVENT_CONNECTED
I (5492) WEBSOCKET: Sending hello 0000
I (6052) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (6052) WEBSOCKET: Received=hello 0000
I (6492) WEBSOCKET: Sending hello 0001
I (7052) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (7052) WEBSOCKET: Received=hello 0001
I (7492) WEBSOCKET: Sending hello 0002
I (8082) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (8082) WEBSOCKET: Received=hello 0002
I (8492) WEBSOCKET: Sending hello 0003
I (9152) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (9162) WEBSOCKET: Received=hello 0003
```