OVMS3-idf/components/bootloader_support/src/bootloader_init.c

// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include <stdint.h>
#include <limits.h>
#include <sys/param.h>

#include "esp_attr.h"
#include "esp_log.h"

#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/cache.h"
#include "esp32/rom/efuse.h"
#include "esp32/rom/ets_sys.h"
#include "esp32/rom/spi_flash.h"
#include "esp32/rom/crc.h"
#include "esp32/rom/rtc.h"
#include "esp32/rom/uart.h"
#include "esp32/rom/gpio.h"
#include "esp32/rom/secure_boot.h"
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#include "esp32s2beta/rom/cache.h"
#include "esp32s2beta/rom/efuse.h"
#include "esp32s2beta/rom/ets_sys.h"
#include "esp32s2beta/rom/spi_flash.h"
#include "esp32s2beta/rom/crc.h"
#include "esp32s2beta/rom/rtc.h"
#include "esp32s2beta/rom/uart.h"
#include "esp32s2beta/rom/gpio.h"
#include "esp32s2beta/rom/secure_boot.h"
#else
#error "Unsupported IDF_TARGET"
#endif

#include "soc/soc.h"
#include "soc/cpu.h"
#include "soc/rtc.h"
#include "soc/dport_reg.h"
#include "soc/gpio_periph.h"
#include "soc/efuse_periph.h"
#include "soc/rtc_periph.h"
#include "soc/timer_periph.h"
#include "soc/rtc_wdt.h"
#include "soc/spi_periph.h"
#if CONFIG_IDF_TARGET_ESP32S2BETA
#include "soc/spi_mem_reg.h"
#include "soc/extmem_reg.h"
#include "soc/assist_debug_reg.h"
#endif

#include "sdkconfig.h"
#include "esp_image_format.h"
#include "esp_secure_boot.h"
#include "esp_flash_encrypt.h"
#include "esp_flash_partitions.h"
#include "bootloader_flash.h"
#include "bootloader_random.h"
#include "bootloader_config.h"
#include "bootloader_common.h"
#include "bootloader_clock.h"
#include "bootloader_common.h"

#include "flash_qio_mode.h"

extern int _bss_start;
extern int _bss_end;
extern int _data_start;
extern int _data_end;

static const char *TAG = "boot";

static esp_err_t bootloader_main();
static void print_flash_info(const esp_image_header_t *pfhdr);
static void update_flash_config(const esp_image_header_t *pfhdr);
static void vddsdio_configure();
static void flash_gpio_configure(const esp_image_header_t *pfhdr);
static void uart_console_configure(void);
static void wdt_reset_check(void);


esp_err_t bootloader_init()
{
    cpu_configure_region_protection();
    cpu_init_memctl();

    /* Sanity check that static RAM is after the stack */
#ifndef NDEBUG
    {
        int *sp = get_sp();
        assert(&_bss_start <= &_bss_end);
        assert(&_data_start <= &_data_end);
#if CONFIG_IDF_TARGET_ESP32
        assert(sp < &_bss_start);
        assert(sp < &_data_start);
#endif
    }
#endif

    //Clear bss
    memset(&_bss_start, 0, (&_bss_end - &_bss_start) * sizeof(_bss_start));

    /* completely reset MMU for both CPUs
       (in case serial bootloader was running) */
#if CONFIG_IDF_TARGET_ESP32
    Cache_Read_Disable(0);
#if !CONFIG_FREERTOS_UNICORE
    Cache_Read_Disable(1);
#endif
    Cache_Flush(0);
#if !CONFIG_FREERTOS_UNICORE
    Cache_Flush(1);
#endif
    mmu_init(0);
#if !CONFIG_FREERTOS_UNICORE
    DPORT_REG_SET_BIT(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CACHE_MMU_IA_CLR);
    mmu_init(1);
    DPORT_REG_CLR_BIT(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CACHE_MMU_IA_CLR);
#endif
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    //TODO, save the autoload value
    Cache_Suspend_ICache();
    Cache_Invalidate_ICache_All();
    Cache_MMU_Init();
#endif
    /* (above steps probably unnecessary for most serial bootloader
       usage, all that's absolutely needed is that we unmask DROM0
       cache on the following two lines - normal ROM boot exits with
       DROM0 cache unmasked, but serial bootloader exits with it
       masked. However can't hurt to be thorough and reset
       everything.)

       The lines which manipulate DPORT_APP_CACHE_MMU_IA_CLR bit are
       necessary to work around a hardware bug.
    */
#if CONFIG_IDF_TARGET_ESP32
    DPORT_REG_CLR_BIT(DPORT_PRO_CACHE_CTRL1_REG, DPORT_PRO_CACHE_MASK_DROM0);
#if !CONFIG_FREERTOS_UNICORE
    DPORT_REG_CLR_BIT(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CACHE_MASK_DROM0);
#endif
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    DPORT_REG_CLR_BIT(DPORT_PRO_ICACHE_CTRL1_REG, DPORT_PRO_ICACHE_MASK_DROM0);
#if !CONFIG_FREERTOS_UNICORE
    DPORT_REG_CLR_BIT(DPORT_APP_ICACHE_CTRL1_REG, DPORT_APP_ICACHE_MASK_DROM0);
#endif
#endif
    if (bootloader_main() != ESP_OK) {
        return ESP_FAIL;
    }
    return ESP_OK;
}

static esp_err_t bootloader_main()
{
    bootloader_common_vddsdio_configure();
    /* Read and keep flash ID, for further use. */
    g_rom_flashchip.device_id = bootloader_read_flash_id();
    esp_image_header_t fhdr;
    if (bootloader_flash_read(ESP_BOOTLOADER_OFFSET, &fhdr, sizeof(esp_image_header_t), true) != ESP_OK) {
        ESP_LOGE(TAG, "failed to load bootloader header!");
        return ESP_FAIL;
    }
    flash_gpio_configure(&fhdr);

#ifdef CONFIG_IDF_TARGET_ESP32
    int rated_freq = bootloader_clock_get_rated_freq_mhz();
    if (rated_freq < CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ) {
        ESP_LOGE(TAG, "Chip CPU frequency rated for %dMHz, configured for %dMHz. Modify CPU frequency in menuconfig",
                 rated_freq, CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ);
        return ESP_FAIL;
    }
#endif

    bootloader_clock_configure();
    uart_console_configure();
    wdt_reset_check();
    ESP_LOGI(TAG, "ESP-IDF %s 2nd stage bootloader", IDF_VER);

    ESP_LOGI(TAG, "compile time " __TIME__ );
#if !CONFIG_FREERTOS_UNICORE
    ets_set_appcpu_boot_addr(0);
#endif

#if CONFIG_BOOTLOADER_WDT_ENABLE && CONFIG_IDF_TARGET_ESP32
    ESP_LOGD(TAG, "Enabling RTCWDT(%d ms)", CONFIG_BOOTLOADER_WDT_TIME_MS);
    rtc_wdt_protect_off();
    rtc_wdt_disable();
    rtc_wdt_set_length_of_reset_signal(RTC_WDT_SYS_RESET_SIG, RTC_WDT_LENGTH_3_2us);
    rtc_wdt_set_length_of_reset_signal(RTC_WDT_CPU_RESET_SIG, RTC_WDT_LENGTH_3_2us);
    rtc_wdt_set_stage(RTC_WDT_STAGE0, RTC_WDT_STAGE_ACTION_RESET_RTC);
    rtc_wdt_set_time(RTC_WDT_STAGE0, CONFIG_BOOTLOADER_WDT_TIME_MS);
    rtc_wdt_enable();
    rtc_wdt_protect_on();
#elif CONFIG_IDF_TARGET_ESP32
    /* disable watch dog here */
    rtc_wdt_disable();
#endif
    REG_SET_FIELD(TIMG_WDTWPROTECT_REG(0), TIMG_WDT_WKEY,  TIMG_WDT_WKEY_VALUE);
    REG_CLR_BIT( TIMG_WDTCONFIG0_REG(0), TIMG_WDT_FLASHBOOT_MOD_EN );

#ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
    const uint32_t spiconfig = ets_efuse_get_spiconfig();
    if (spiconfig != EFUSE_SPICONFIG_SPI_DEFAULTS && spiconfig != EFUSE_SPICONFIG_HSPI_DEFAULTS) {
        ESP_LOGE(TAG, "SPI flash pins are overridden. \"Enable SPI flash ROM driver patched functions\" must be enabled in menuconfig");
        return ESP_FAIL;
    }
#endif

    esp_rom_spiflash_unlock();

    ESP_LOGI(TAG, "Enabling RNG early entropy source...");
    bootloader_random_enable();

#if CONFIG_ESPTOOLPY_FLASHMODE_QIO || CONFIG_ESPTOOLPY_FLASHMODE_QOUT
    bootloader_enable_qio_mode();
#endif

    print_flash_info(&fhdr);

    update_flash_config(&fhdr);
    return ESP_OK;
}

static void update_flash_config(const esp_image_header_t *pfhdr)
{
    uint32_t size;
    switch (pfhdr->spi_size) {
    case ESP_IMAGE_FLASH_SIZE_1MB:
        size = 1;
        break;
    case ESP_IMAGE_FLASH_SIZE_2MB:
        size = 2;
        break;
    case ESP_IMAGE_FLASH_SIZE_4MB:
        size = 4;
        break;
    case ESP_IMAGE_FLASH_SIZE_8MB:
        size = 8;
        break;
    case ESP_IMAGE_FLASH_SIZE_16MB:
        size = 16;
        break;
    default:
        size = 2;
    }
#if CONFIG_IDF_TARGET_ESP32
    Cache_Read_Disable(0);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    uint32_t autoload = Cache_Suspend_ICache();
#endif
    // Set flash chip size
    esp_rom_spiflash_config_param(g_rom_flashchip.device_id, size * 0x100000, 0x10000, 0x1000, 0x100, 0xffff);
    // TODO: set mode
    // TODO: set frequency
#if CONFIG_IDF_TARGET_ESP32
    Cache_Flush(0);
    Cache_Read_Enable(0);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    Cache_Resume_ICache(autoload);
#endif
}

static void print_flash_info(const esp_image_header_t *phdr)
{
#if (BOOT_LOG_LEVEL >= BOOT_LOG_LEVEL_NOTICE)

    ESP_LOGD(TAG, "magic %02x", phdr->magic );
    ESP_LOGD(TAG, "segments %02x", phdr->segment_count );
    ESP_LOGD(TAG, "spi_mode %02x", phdr->spi_mode );
    ESP_LOGD(TAG, "spi_speed %02x", phdr->spi_speed );
    ESP_LOGD(TAG, "spi_size %02x", phdr->spi_size );

    const char *str;
    switch ( phdr->spi_speed ) {
    case ESP_IMAGE_SPI_SPEED_40M:
        str = "40MHz";
        break;
    case ESP_IMAGE_SPI_SPEED_26M:
        str = "26.7MHz";
        break;
    case ESP_IMAGE_SPI_SPEED_20M:
        str = "20MHz";
        break;
    case ESP_IMAGE_SPI_SPEED_80M:
        str = "80MHz";
        break;
    default:
        str = "20MHz";
        break;
    }
    ESP_LOGI(TAG, "SPI Speed      : %s", str );

    /* SPI mode could have been set to QIO during boot already,
       so test the SPI registers not the flash header */
#if CONFIG_IDF_TARGET_ESP32
    uint32_t spi_ctrl = REG_READ(SPI_CTRL_REG(0));
    if (spi_ctrl & SPI_FREAD_QIO) {
        str = "QIO";
    } else if (spi_ctrl & SPI_FREAD_QUAD) {
        str = "QOUT";
    } else if (spi_ctrl & SPI_FREAD_DIO) {
        str = "DIO";
    } else if (spi_ctrl & SPI_FREAD_DUAL) {
        str = "DOUT";
    } else if (spi_ctrl & SPI_FASTRD_MODE) {
        str = "FAST READ";
    } else {
        str = "SLOW READ";
    }
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    uint32_t spi_ctrl = REG_READ(SPI_MEM_CTRL_REG(0));
    if (spi_ctrl & SPI_MEM_FREAD_QIO) {
        str = "QIO";
    } else if (spi_ctrl & SPI_MEM_FREAD_QUAD) {
        str = "QOUT";
    } else if (spi_ctrl & SPI_MEM_FREAD_DIO) {
        str = "DIO";
    } else if (spi_ctrl & SPI_MEM_FREAD_DUAL) {
        str = "DOUT";
    } else if (spi_ctrl & SPI_MEM_FASTRD_MODE) {
        str = "FAST READ";
    } else {
        str = "SLOW READ";
    }
#endif
    ESP_LOGI(TAG, "SPI Mode       : %s", str );

    switch ( phdr->spi_size ) {
    case ESP_IMAGE_FLASH_SIZE_1MB:
        str = "1MB";
        break;
    case ESP_IMAGE_FLASH_SIZE_2MB:
        str = "2MB";
        break;
    case ESP_IMAGE_FLASH_SIZE_4MB:
        str = "4MB";
        break;
    case ESP_IMAGE_FLASH_SIZE_8MB:
        str = "8MB";
        break;
    case ESP_IMAGE_FLASH_SIZE_16MB:
        str = "16MB";
        break;
    default:
        str = "2MB";
        break;
    }
    ESP_LOGI(TAG, "SPI Flash Size : %s", str );
#endif
}

static void vddsdio_configure()
{
#if CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V
    rtc_vddsdio_config_t cfg = rtc_vddsdio_get_config();
    if (cfg.enable == 1 && cfg.tieh == RTC_VDDSDIO_TIEH_1_8V) {    // VDDSDIO regulator is enabled @ 1.8V
        cfg.drefh = 3;
        cfg.drefm = 3;
        cfg.drefl = 3;
        cfg.force = 1;
        rtc_vddsdio_set_config(cfg);
        ets_delay_us(10); // wait for regulator to become stable
    }
#endif // CONFIG_BOOTLOADER_VDDSDIO_BOOST
}

#if CONFIG_IDF_TARGET_ESP32
#define FLASH_CLK_IO      6
#define FLASH_CS_IO       11
#define FLASH_SPIQ_IO     7
#define FLASH_SPID_IO     8
#define FLASH_SPIWP_IO    10
#define FLASH_SPIHD_IO    9
#endif

#if CONFIG_IDF_TARGET_ESP32
#define FLASH_IO_MATRIX_DUMMY_40M   1
#define FLASH_IO_MATRIX_DUMMY_80M   2
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#define FLASH_IO_MATRIX_DUMMY_40M   0
#define FLASH_IO_MATRIX_DUMMY_80M   0
#endif
#define FLASH_IO_DRIVE_GD_WITH_1V8PSRAM    3

/*
 * Bootloader reads SPI configuration from bin header, so that
 * the burning configuration can be different with compiling configuration.
 */
static void IRAM_ATTR flash_gpio_configure(const esp_image_header_t *pfhdr)
{
    int spi_cache_dummy = 0;
    int drv = 2;
    switch (pfhdr->spi_mode) {
    case ESP_IMAGE_SPI_MODE_QIO:
        spi_cache_dummy = SPI0_R_DIO_DUMMY_CYCLELEN;
        break;
    case ESP_IMAGE_SPI_MODE_DIO:
        spi_cache_dummy = SPI0_R_DIO_DUMMY_CYCLELEN;   //qio 3
        break;
    case ESP_IMAGE_SPI_MODE_QOUT:
    case ESP_IMAGE_SPI_MODE_DOUT:
    default:
        spi_cache_dummy = SPI0_R_FAST_DUMMY_CYCLELEN;
        break;
    }

    /* dummy_len_plus values defined in ROM for SPI flash configuration */
    extern uint8_t g_rom_spiflash_dummy_len_plus[];
    switch (pfhdr->spi_speed) {
    case ESP_IMAGE_SPI_SPEED_80M:
        g_rom_spiflash_dummy_len_plus[0] = FLASH_IO_MATRIX_DUMMY_80M;
        g_rom_spiflash_dummy_len_plus[1] = FLASH_IO_MATRIX_DUMMY_80M;
#if CONFIG_IDF_TARGET_ESP32
        SET_PERI_REG_BITS(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + FLASH_IO_MATRIX_DUMMY_80M,
                          SPI_USR_DUMMY_CYCLELEN_S);  //DUMMY
#elif CONFIG_IDF_TARGET_ESP32S2BETA
        SET_PERI_REG_BITS(SPI_MEM_USER1_REG(0), SPI_MEM_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + FLASH_IO_MATRIX_DUMMY_80M,
                          SPI_MEM_USR_DUMMY_CYCLELEN_S);  //DUMMY
#endif
        drv = 3;
        break;
    case ESP_IMAGE_SPI_SPEED_40M:
        g_rom_spiflash_dummy_len_plus[0] = FLASH_IO_MATRIX_DUMMY_40M;
        g_rom_spiflash_dummy_len_plus[1] = FLASH_IO_MATRIX_DUMMY_40M;
#if CONFIG_IDF_TARGET_ESP32
        SET_PERI_REG_BITS(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + FLASH_IO_MATRIX_DUMMY_40M,
                          SPI_USR_DUMMY_CYCLELEN_S);  //DUMMY
#elif CONFIG_IDF_TARGET_ESP32S2BETA
        SET_PERI_REG_BITS(SPI_MEM_USER1_REG(0), SPI_MEM_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + FLASH_IO_MATRIX_DUMMY_40M,
                          SPI_MEM_USR_DUMMY_CYCLELEN_S);  //DUMMY
#endif
        break;
    default:
        break;
    }
#if CONFIG_IDF_TARGET_ESP32
    uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
    uint32_t pkg_ver = chip_ver & 0x7;

    if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5) {
        // For ESP32D2WD the SPI pins are already configured
        // flash clock signal should come from IO MUX.
        PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
        SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
    } else if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2) {
        // For ESP32PICOD2 the SPI pins are already configured
        // flash clock signal should come from IO MUX.
        PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
        SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
    } else if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
        // For ESP32PICOD4 the SPI pins are already configured
        // flash clock signal should come from IO MUX.
        PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
        SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
    } else {
        const uint32_t spiconfig = ets_efuse_get_spiconfig();
        if (spiconfig == EFUSE_SPICONFIG_SPI_DEFAULTS) {
            gpio_matrix_out(FLASH_CS_IO, SPICS0_OUT_IDX, 0, 0);
            gpio_matrix_out(FLASH_SPIQ_IO, SPIQ_OUT_IDX, 0, 0);
            gpio_matrix_in(FLASH_SPIQ_IO, SPIQ_IN_IDX, 0);
            gpio_matrix_out(FLASH_SPID_IO, SPID_OUT_IDX, 0, 0);
            gpio_matrix_in(FLASH_SPID_IO, SPID_IN_IDX, 0);
            gpio_matrix_out(FLASH_SPIWP_IO, SPIWP_OUT_IDX, 0, 0);
            gpio_matrix_in(FLASH_SPIWP_IO, SPIWP_IN_IDX, 0);
            gpio_matrix_out(FLASH_SPIHD_IO, SPIHD_OUT_IDX, 0, 0);
            gpio_matrix_in(FLASH_SPIHD_IO, SPIHD_IN_IDX, 0);
            //select pin function gpio
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA0_U, PIN_FUNC_GPIO);
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA1_U, PIN_FUNC_GPIO);
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA2_U, PIN_FUNC_GPIO);
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA3_U, PIN_FUNC_GPIO);
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CMD_U, PIN_FUNC_GPIO);
            // flash clock signal should come from IO MUX.
            // set drive ability for clock
            PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
            SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);

#if CONFIG_SPIRAM_TYPE_ESPPSRAM32
            uint32_t flash_id = g_rom_flashchip.device_id;
            if (flash_id == FLASH_ID_GD25LQ32C) {
                // Set drive ability for 1.8v flash in 80Mhz.
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA0_U, FUN_DRV, 3, FUN_DRV_S);
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA1_U, FUN_DRV, 3, FUN_DRV_S);
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA2_U, FUN_DRV, 3, FUN_DRV_S);
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA3_U, FUN_DRV, 3, FUN_DRV_S);
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CMD_U, FUN_DRV, 3, FUN_DRV_S);
                SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, 3, FUN_DRV_S);
            }
#endif
        }
    }
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    bootloader_configure_spi_pins(drv);
#endif
}

static void uart_console_configure(void)
{
#if CONFIG_ESP_CONSOLE_UART_NONE
    ets_install_putc1(NULL);
    ets_install_putc2(NULL);
#else // CONFIG_ESP_CONSOLE_UART_NONE
    const int uart_num = CONFIG_ESP_CONSOLE_UART_NUM;

    uartAttach();
    ets_install_uart_printf();

    // Wait for UART FIFO to be empty.
    uart_tx_wait_idle(0);

#if CONFIG_ESP_CONSOLE_UART_CUSTOM
    // Some constants to make the following code less upper-case
    const int uart_tx_gpio = CONFIG_ESP_CONSOLE_UART_TX_GPIO;
    const int uart_rx_gpio = CONFIG_ESP_CONSOLE_UART_RX_GPIO;
    // Switch to the new UART (this just changes UART number used for
    // ets_printf in ROM code).
    uart_tx_switch(uart_num);
    // If console is attached to UART1 or if non-default pins are used,
    // need to reconfigure pins using GPIO matrix
    if (uart_num != 0 || uart_tx_gpio != 1 || uart_rx_gpio != 3) {
        // Change pin mode for GPIO1/3 from UART to GPIO
        PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_GPIO3);
        PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_GPIO1);
        // Route GPIO signals to/from pins
        // (arrays should be optimized away by the compiler)
        const uint32_t tx_idx_list[3] = { U0TXD_OUT_IDX, U1TXD_OUT_IDX, U2TXD_OUT_IDX };
        const uint32_t rx_idx_list[3] = { U0RXD_IN_IDX, U1RXD_IN_IDX, U2RXD_IN_IDX };
        const uint32_t uart_reset[3] = { DPORT_UART_RST, DPORT_UART1_RST, DPORT_UART2_RST };
        const uint32_t tx_idx = tx_idx_list[uart_num];
        const uint32_t rx_idx = rx_idx_list[uart_num];

        PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[uart_rx_gpio]);
        gpio_pad_pullup(uart_rx_gpio);

        gpio_matrix_out(uart_tx_gpio, tx_idx, 0, 0);
        gpio_matrix_in(uart_rx_gpio, rx_idx, 0);

        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, uart_reset[uart_num]);
        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, uart_reset[uart_num]);
    }
#endif // CONFIG_ESP_CONSOLE_UART_CUSTOM

    // Set configured UART console baud rate
    const int uart_baud = CONFIG_ESP_CONSOLE_UART_BAUDRATE;
    uart_div_modify(uart_num, (rtc_clk_apb_freq_get() << 4) / uart_baud);

#endif // CONFIG_ESP_CONSOLE_UART_NONE
}

static void wdt_reset_cpu0_info_enable(void)
{
#if CONFIG_IDF_TARGET_ESP32
    //We do not reset core1 info here because it didn't work before cpu1 was up. So we put it into call_start_cpu1.
    DPORT_REG_SET_BIT(DPORT_PRO_CPU_RECORD_CTRL_REG, DPORT_PRO_CPU_PDEBUG_ENABLE | DPORT_PRO_CPU_RECORD_ENABLE);
    DPORT_REG_CLR_BIT(DPORT_PRO_CPU_RECORD_CTRL_REG, DPORT_PRO_CPU_RECORD_ENABLE);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    DPORT_REG_SET_BIT(DPORT_PERI_CLK_EN_REG, DPORT_PERI_EN_ASSIST_DEBUG);
    DPORT_REG_CLR_BIT(DPORT_PERI_RST_EN_REG, DPORT_PERI_EN_ASSIST_DEBUG);
    REG_WRITE(ASSIST_DEBUG_PRO_PDEBUGENABLE, 1);
    REG_WRITE(ASSIST_DEBUG_PRO_RCD_RECORDING, 1);
#endif
}

static void wdt_reset_info_dump(int cpu)
{
    uint32_t inst = 0, pid = 0, stat = 0, data = 0, pc = 0,
             lsstat = 0, lsaddr = 0, lsdata = 0, dstat = 0;
    const char *cpu_name = cpu ? "APP" : "PRO";

#if CONFIG_IDF_TARGET_ESP32
    if (cpu == 0) {
        stat    = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_STATUS_REG);
        pid     = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PID_REG);
        inst    = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGINST_REG);
        dstat   = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGSTATUS_REG);
        data    = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGDATA_REG);
        pc      = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGPC_REG);
        lsstat  = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGLS0STAT_REG);
        lsaddr  = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGLS0ADDR_REG);
        lsdata  = DPORT_REG_READ(DPORT_PRO_CPU_RECORD_PDEBUGLS0DATA_REG);

    } else {
#if !CONFIG_FREERTOS_UNICORE
        stat    = DPORT_REG_READ(DPORT_APP_CPU_RECORD_STATUS_REG);
        pid     = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PID_REG);
        inst    = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGINST_REG);
        dstat   = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGSTATUS_REG);
        data    = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGDATA_REG);
        pc      = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGPC_REG);
        lsstat  = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGLS0STAT_REG);
        lsaddr  = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGLS0ADDR_REG);
        lsdata  = DPORT_REG_READ(DPORT_APP_CPU_RECORD_PDEBUGLS0DATA_REG);
#else
        ESP_LOGE(TAG, "WDT reset info: &s CPU not support!\n", cpu_name);
        return;
#endif
    }
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    stat    = 0xdeadbeef;
    pid     = 0;
    inst    = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGINST);
    dstat   = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGSTATUS);
    data    = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGDATA);
    pc      = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGPC);
    lsstat  = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGLS0STAT);
    lsaddr  = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGLS0ADDR);
    lsdata  = REG_READ(ASSIST_DEBUG_PRO_RCD_PDEBUGLS0DATA);
#endif

    if (DPORT_RECORD_PDEBUGINST_SZ(inst) == 0 &&
            DPORT_RECORD_PDEBUGSTATUS_BBCAUSE(dstat) == DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_WAITI) {
        ESP_LOGW(TAG, "WDT reset info: %s CPU PC=0x%x (waiti mode)", cpu_name, pc);
    } else {
        ESP_LOGW(TAG, "WDT reset info: %s CPU PC=0x%x", cpu_name, pc);
    }
    ESP_LOGD(TAG, "WDT reset info: %s CPU STATUS        0x%08x", cpu_name, stat);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PID           0x%08x", cpu_name, pid);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGINST    0x%08x", cpu_name, inst);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGSTATUS  0x%08x", cpu_name, dstat);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGDATA    0x%08x", cpu_name, data);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGPC      0x%08x", cpu_name, pc);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGLS0STAT 0x%08x", cpu_name, lsstat);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGLS0ADDR 0x%08x", cpu_name, lsaddr);
    ESP_LOGD(TAG, "WDT reset info: %s CPU PDEBUGLS0DATA 0x%08x", cpu_name, lsdata);
}

static void wdt_reset_check(void)
{
    int wdt_rst = 0;
    RESET_REASON rst_reas[2];

    rst_reas[0] = rtc_get_reset_reason(0);
#if CONFIG_IDF_TARGET_ESP32
    rst_reas[1] = rtc_get_reset_reason(1);
    if (rst_reas[0] == RTCWDT_SYS_RESET || rst_reas[0] == TG0WDT_SYS_RESET || rst_reas[0] == TG1WDT_SYS_RESET ||
            rst_reas[0] == TGWDT_CPU_RESET  || rst_reas[0] == RTCWDT_CPU_RESET) {
        ESP_LOGW(TAG, "PRO CPU has been reset by WDT.");
        wdt_rst = 1;
    }
    if (rst_reas[1] == RTCWDT_SYS_RESET || rst_reas[1] == TG0WDT_SYS_RESET || rst_reas[1] == TG1WDT_SYS_RESET ||
            rst_reas[1] == TGWDT_CPU_RESET  || rst_reas[1] == RTCWDT_CPU_RESET) {
        ESP_LOGW(TAG, "APP CPU has been reset by WDT.");
        wdt_rst = 1;
    }
#elif CONFIG_IDF_TARGET_ESP32S2BETA
    if (rst_reas[0] == RTCWDT_SYS_RESET || rst_reas[0] == TG0WDT_SYS_RESET || rst_reas[0] == TG1WDT_SYS_RESET ||
            rst_reas[0] == TG0WDT_CPU_RESET || rst_reas[0] == TG1WDT_CPU_RESET || rst_reas[0] == RTCWDT_CPU_RESET) {
        ESP_LOGW(TAG, "PRO CPU has been reset by WDT.");
        wdt_rst = 1;
    }
#endif
    if (wdt_rst) {
        // if reset by WDT dump info from trace port
        wdt_reset_info_dump(0);
#if CONFIG_IDF_TARGET_ESP32
        wdt_reset_info_dump(1);
#endif
    }
    wdt_reset_cpu0_info_enable();
}

void __assert_func(const char *file, int line, const char *func, const char *expr)
{
    ESP_LOGE(TAG, "Assert failed in %s, %s:%d (%s)", func, file, line, expr);
    while (1) {}
}

void abort()
{
#if !(CONFIG_ESP32_PANIC_SILENT_REBOOT || CONFIG_ESP32S2_PANIC_SILENT_REBOOT)
    ets_printf("abort() was called at PC 0x%08x\r\n", (intptr_t)__builtin_return_address(0) - 3);
#endif
    if (esp_cpu_in_ocd_debug_mode()) {
        __asm__ ("break 0,0");
    }
    while (1) {}
}