OVMS3-idf/docs/en/get-started/add-idf_path-to-profile.rst

65 lines
2.3 KiB
ReStructuredText
Raw Normal View History

2017-03-26 22:01:52 +00:00
Add IDF_PATH to User Profile
============================
To preserve setting of ``IDF_PATH`` environment variable between system restarts, add it to the user profile, following instructions below.
.. _add-idf_path-to-profile-windows:
Windows
-------
The user profile scripts are contained in ``C:/msys32/etc/profile.d/`` directory. They are executed every time you open an MSYS2 window.
#. Create a new script file in ``C:/msys32/etc/profile.d/`` directory. Name it ``export_idf_path.sh``.
#. Identify the path to ESP-IDF directory. It is specific to your system configuration and may look something like ``C:\msys32\home\user-name\esp\esp-idf``
2017-03-26 22:01:52 +00:00
#. Add the ``export`` command to the script file, e.g.::
export IDF_PATH="C:/msys32/home/user-name/esp/esp-idf"
2017-03-26 22:01:52 +00:00
Remember to replace back-slashes with forward-slashes in the original Windows path.
#. Save the script file.
#. Close MSYS2 window and open it again. Check if ``IDF_PATH`` is set, by typing::
printenv IDF_PATH
The path previusly entered in the script file should be printed out.
If you do not like to have ``IDF_PATH`` set up permanently in user profile, you should enter it manually on opening of an MSYS2 window::
export IDF_PATH="C:/msys32/home/user-name/esp/esp-idf"
2017-03-26 22:01:52 +00:00
If you got here from section :ref:`get-started-setup-path`, while installing s/w for ESP32 development, then go back to section :ref:`get-started-start-project`.
.. _add-idf_path-to-profile-linux-macos:
Linux and MacOS
---------------
Set up ``IDF_PATH`` by adding the following line to ``~/.profile`` file::
2017-03-26 22:01:52 +00:00
export IDF_PATH=~/esp/esp-idf
Log off and log in back to make this change effective.
.. note::
If you have ``/bin/bash`` set as login shell, and both ``.bash_profile`` and ``.profile`` exist, then update ``.bash_profile`` instead.
2017-03-26 22:01:52 +00:00
Run the following command to check if ``IDF_PATH`` is set::
printenv IDF_PATH
The path previously entered in ``~/.profile`` file (or set manually) should be printed out.
If you do not like to have ``IDF_PATH`` set up permanently, you should enter it manually in terminal window on each restart or logout::
2017-03-26 22:01:52 +00:00
export IDF_PATH=~/esp/esp-idf
2017-03-26 22:01:52 +00:00
If you got here from section :ref:`get-started-setup-path`, while installing s/w for ESP32 development, then go back to section :ref:`get-started-start-project`.