2016-11-04 07:08:30 +00:00
/******************************************************************************
*
* Copyright ( C ) 2014 The Android Open Source Project
* Copyright 2002 - 2004 Open Interface North America , Inc . All rights reserved .
*
* Licensed under the Apache License , Version 2.0 ( the " License " ) ;
* you may not use this file except in compliance with the License .
* You may obtain a copy of the License at :
*
* http : //www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing , software
* distributed under the License is distributed on an " AS IS " BASIS ,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND , either express or implied .
* See the License for the specific language governing permissions and
* limitations under the License .
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# ifndef _OI_STATUS_H
# define _OI_STATUS_H
/**
* @ file
* This file contains status codes for BLUEmagic 3.0 software .
*/
# include "oi_stddefs.h"
/** \addtogroup Misc Miscellaneous APIs */
/**@{*/
# ifdef __cplusplus
extern " C " {
# endif
2016-11-26 05:09:55 +00:00
/** test it **/
2016-11-04 07:08:30 +00:00
/**
* OI_STATUS must fit in 16 bits , so status codes can range from 0 to 66535 , inclusive .
*/
typedef enum {
OI_STATUS_SUCCESS = 0 , /**< function call succeeded alias for #OI_OK */
OI_OK = 0 , /**< function call succeeded alias for #OI_STATUS_SUCCESS */
OI_STATUS_INVALID_PARAMETERS = 101 , /**< invalid function input parameters */
OI_STATUS_NOT_IMPLEMENTED = 102 , /**< attempt to use an unimplemented function */
OI_STATUS_NOT_INITIALIZED = 103 , /**< data not initialized */
OI_STATUS_NO_RESOURCES = 104 , /**< generic resource allocation failure status */
OI_STATUS_INTERNAL_ERROR = 105 , /**< internal inconsistency */
OI_STATUS_OUT_OF_MEMORY = 106 , /**< generally, OI_Malloc failed */
OI_ILLEGAL_REENTRANT_CALL = 107 , /**< violation of non-reentrant module policy */
OI_STATUS_INITIALIZATION_FAILED = 108 , /**< module initialization failed */
OI_STATUS_INITIALIZATION_PENDING = 109 , /**< inititialization not yet complete */
OI_STATUS_NO_SCO_SUPPORT = 110 , /**< SCO operation rejected; system not configured for SCO */
OI_STATUS_OUT_OF_STATIC_MEMORY = 111 , /**< static malloc failed */
OI_TIMEOUT = 112 , /**< generic timeout */
OI_OS_ERROR = 113 , /**< some operating system error */
OI_FAIL = 114 , /**< generic failure */
OI_STRING_FORMAT_ERROR = 115 , /**< error in VarString formatting string */
OI_STATUS_PENDING = 116 , /**< The operation is pending. */
OI_STATUS_INVALID_COMMAND = 117 , /**< The command was invalid. */
OI_BUSY_FAIL = 118 , /**< command rejected due to busy */
OI_STATUS_ALREADY_REGISTERED = 119 , /**< The registration has already been performed. */
OI_STATUS_NOT_FOUND = 120 , /**< The referenced resource was not found. */
OI_STATUS_NOT_REGISTERED = 121 , /**< not registered */
OI_STATUS_NOT_CONNECTED = 122 , /**< not connected */
OI_CALLBACK_FUNCTION_REQUIRED = 123 , /**< A callback function parameter was required. */
OI_STATUS_MBUF_OVERFLOW = 124 , /**< There is no room to add another buffer to an mbuf. */
OI_STATUS_MBUF_UNDERFLOW = 125 , /**< There was an attempt to pull too many bytes from an mbuf. */
OI_STATUS_CONNECTION_EXISTS = 126 , /**< connection exists */
OI_STATUS_NOT_CONFIGURED = 127 , /**< module not configured */
OI_LOWER_STACK_ERROR = 128 , /**< An error was reported by lower stack API. This is used for embedded platforms. */
OI_STATUS_RESET_IN_PROGRESS = 129 , /**< Request failed/rejected because we're busy resetting. */
OI_STATUS_ACCESS_DENIED = 130 , /**< Generic access denied error. */
OI_STATUS_DATA_ERROR = 131 , /**< Generic data error. */
OI_STATUS_INVALID_ROLE = 132 , /**< The requested role was invalid. */
OI_STATUS_ALREADY_CONNECTED = 133 , /**< The requested connection is already established. */
OI_STATUS_PARSE_ERROR = 134 , /**< Parse error */
OI_STATUS_END_OF_FILE = 135 , /**< End of file */
OI_STATUS_READ_ERROR = 136 , /**< Generic read error */
OI_STATUS_WRITE_ERROR = 137 , /**< Generic write error */
OI_STATUS_NEGOTIATION_FAILURE = 138 , /**< Error in negotiation */
OI_STATUS_READ_IN_PROGRESS = 139 , /**< A read is already in progress */
OI_STATUS_ALREADY_INITIALIZED = 140 , /**< Initialization has already been done */
OI_STATUS_STILL_CONNECTED = 141 , /**< The service cannot be shutdown because there are still active connections. */
OI_STATUS_MTU_EXCEEDED = 142 , /**< The packet is too big */
OI_STATUS_LINK_TERMINATED = 143 , /**< The link was terminated */
OI_STATUS_PIN_CODE_TOO_LONG = 144 , /**< Application gave us a pin code that is too long */
OI_STATUS_STILL_REGISTERED = 145 , /**< The service cannot be shutdown because there are still active registrations. */
OI_STATUS_SPEC_VIOLATION = 146 , /**< Some application behavior contrary to BT specifications */
OI_STATUS_PSM_ALREADY_REGISTERED = 402 , /**< L2CAP: The specified PSM has already been registered. */
OI_STATUS_INVALID_CID = 403 , /**< L2CAP: CID is invalid or no longer valid (connection terminated) */
OI_STATUS_CID_NOT_FOUND = 404 , /**< L2CAP: CID does not represent a current connection */
OI_STATUS_CHANNEL_NOT_FOUND = 406 , /**< L2CAP: CID does not represent a current connection */
OI_STATUS_PSM_NOT_FOUND = 407 , /**< L2CAP: PSM not found */
OI_STATUS_INVALID_STATE = 408 , /**< L2CAP: invalid state */
OI_STATUS_WRITE_IN_PROGRESS = 410 , /**< L2CAP: write in progress */
OI_STATUS_INVALID_PACKET = 411 , /**< L2CAP: invalid packet */
OI_STATUS_SEND_COMPLETE = 412 , /**< L2CAP: send is complete */
OI_STATUS_INVALID_HANDLE = 414 , /**< L2CAP: handle is invalid */
OI_STATUS_GROUP_FULL = 418 , /**< L2CAP: No more members can be added to the specified group. */
OI_STATUS_DEVICE_ALREADY_IN_GROUP = 423 , /**< L2CAP: The device already exists in the group. */
OI_STATUS_DUPLICATE_GROUP = 425 , /**< L2CAP: attempt to add more than one group */
OI_STATUS_EMPTY_GROUP = 426 , /**< L2CAP: group is empty */
OI_STATUS_PACKET_NOT_FOUND = 427 , /**< L2CAP: packet not found */
OI_STATUS_BUFFER_TOO_SMALL = 428 , /**< L2CAP: The buffer size is too small. */
OI_STATUS_IDENTIFIER_NOT_FOUND = 429 , /**< L2CAP: identifier not found */
OI_L2CAP_DISCONNECT_LOWER_LAYER = 430 , /**< L2CAP: The lower level forced a disconnect. */
OI_L2CAP_DISCONNECT_REMOTE_REQUEST = 431 , /**< L2CAP: The remote device requested a disconnect. */
OI_L2CAP_GROUP_ADD_CONNECT_FAIL = 433 , /**< L2CAP: Group add connect faiL */
OI_L2CAP_GROUP_REMOVE_FAILURE = 434 , /**< L2CAP: Group remove failure */
OI_L2CAP_DATA_WRITE_ERROR_LINK_TERM = 435 , /**< L2CAP: Data write error LINK_TERM */
OI_L2CAP_DISCONNECT_LOCAL_REQUEST = 436 , /**< L2CAP: Disconnect local request */
OI_L2CAP_CONNECT_TIMEOUT = 437 , /**< L2CAP: Connect timeout */
OI_L2CAP_DISCONNECT_TIMEOUT = 439 , /**< L2CAP: Disconnect timeout */
OI_L2CAP_PING_TIMEOUT = 440 , /**< L2CAP: Ping timeout */
OI_L2CAP_GET_INFO_TIMEOUT = 441 , /**< L2CAP: Get info timeout */
OI_L2CAP_INVALID_ADDRESS = 444 , /**< L2CAP: Invalid address */
OI_L2CAP_CMD_REJECT_RCVD = 445 , /**< L2CAP: remote sent us 'command reject' response */
OI_L2CAP_CONNECT_BASE = 450 , /**< L2CAP: Connect base */
OI_L2CAP_CONNECT_PENDING = 451 , /**< L2CAP: Connect pending */
OI_L2CAP_CONNECT_REFUSED_INVALID_PSM = 452 , /**< L2CAP: Connect refused invalid PSM */
OI_L2CAP_CONNECT_REFUSED_SECURITY = 453 , /**< L2CAP: Connect refused security */
OI_L2CAP_CONNECT_REFUSED_NO_RESOURCES = 454 , /**< L2CAP: Connect refused no resources */
OI_L2CAP_CONFIG_BASE = 460 , /**< L2CAP: Config base */
2016-11-26 05:09:55 +00:00
OI_L2CAP_CONFIG_FAIL_INVALID_PARAMETERS = 461 , /**< L2CAP: Config fail invalid parameters */
2016-11-04 07:08:30 +00:00
OI_L2CAP_CONFIG_FAIL_NO_REASON = 462 , /**< L2CAP: Config fail no reason */
OI_L2CAP_CONFIG_FAIL_UNKNOWN_OPTIONS = 463 , /**< L2CAP: Config fail unknown options */
OI_L2CAP_GET_INFO_BASE = 470 , /**< L2CAP: Get info base */
OI_L2CAP_GET_INFO_NOT_SUPPORTED = 471 , /**< L2CAP: Get info not supported */
OI_L2CAP_MTU_EXCEEDED = 472 , /**< L2CAP: The MTU of the channel was exceeded */
OI_L2CAP_INVALID_PSM = 482 , /**< L2CAP: Invalid PSM */
OI_L2CAP_INVALID_MTU = 483 , /**< L2CAP: Invalid MTU */
OI_L2CAP_INVALID_FLUSHTO = 484 , /**< L2CAP: Invalid flush timeout */
OI_HCI_NO_SUCH_CONNECTION = 601 , /**< HCI: caller specified a non-existent connection handle */
OI_HCI_CB_LIST_FULL = 603 , /**< HCI: callback list is full, cannot attempt to send command */
OI_HCI_EVENT_UNDERRUN = 605 , /**< HCI: parsing event packet, premature end-of-parameters */
OI_HCI_UNKNOWN_EVENT_CODE = 607 , /**< HCI: event received - event code is unknown */
OI_HCI_BAD_EVENT_PARM_LEN = 608 , /**< HCI: event - parameter length is incorrect */
OI_HCI_CMD_QUEUE_FULL = 611 , /**< HCI: command queue is full */
OI_HCI_SHORT_EVENT = 612 , /**< HCI: event received, missing event code and/or parm len */
OI_HCI_TRANSMIT_NOT_READY = 613 , /**< HCI: ACL/SCO transmit request failed - busy or no buffers available */
OI_HCI_ORPHAN_SENT_EVENT = 614 , /**< HCI: got spurious 'sent' event from transport layer */
OI_HCI_CMD_TABLE_ERROR = 615 , /**< HCI: inconsistency in the internal command table */
OI_HCI_UNKNOWN_CMD_ID = 616 , /**< HCI: HciApi Command - unknown command id */
OI_HCI_UNEXPECTED_EVENT = 619 , /**< HCI: event received which only occurs in response to our cmd */
OI_HCI_EVENT_TABLE_ERROR = 620 , /**< HCI: inconsistency in the internal event table */
OI_HCI_EXPECTED_EVENT_TIMOUT = 621 , /**< HCI: timed out waiting for an expected event */
OI_HCI_NO_CMD_DESC_FOR_OPCODE = 622 , /**< HCI: event opcode is not known */
OI_HCI_INVALID_OPCODE_ERROR = 623 , /**< HCI: command opcode is invalid */
OI_HCI_FLOW_CONTROL_DISABLED = 624 , /**< HCI: can not use host flow control APIs if disabled in configuration */
OI_HCI_TX_COMPLETE = 625 , /**< HCI: packet delivery to Host Controler complete */
OI_HCI_TX_ERROR = 626 , /**< HCI: failed to deliver packet to Host Controler */
OI_HCI_DEVICE_NOT_INITIALIZED = 627 , /**< HCI: commands from upper layers disallowed until device is up and running */
OI_HCI_UNSUPPORTED_COMMAND = 628 , /**< HCI: command requested is not supported by local device */
OI_HCI_PASSTHROUGH_ERROR = 629 , /**< HCI: Error processing passthrough command */
OI_HCI_PASSTHROUGH_ALREADY_SET = 630 , /**< HCI: Passthrough mode already enabled */
OI_HCI_RESET_FAILURE = 631 , /**< HCI: failed to reset the device/baseband */
OI_HCI_TRANSPORT_RESET = 632 , /**< HCI: some operation failed because of a reset in the transport */
OI_HCIERR_HCIIFC_INIT_FAILURE = 633 , /**< HCI: failed to initialize transport layer interface */
OI_HCIERR_FIRST_ERROR_VALUE = 701 , /**< marker for first HCI protocol error */
OI_HCIERR_UNKNOWN_HCI_COMMAND = 701 , /**< HCI: protocol error 0x01 */
OI_HCIERR_NO_CONNECTION = 702 , /**< HCI: protocol error 0x02 */
OI_HCIERR_HARDWARE_FAILURE = 703 , /**< HCI: protocol error 0x03 */
OI_HCIERR_PAGE_TIMEOUT = 704 , /**< HCI: protocol error 0x04 */
OI_HCIERR_AUTHENTICATION_FAILURE = 705 , /**< HCI: protocol error 0x05 */
OI_HCIERR_KEY_MISSING = 706 , /**< HCI: protocol error 0x06 */
OI_HCIERR_MEMORY_FULL = 707 , /**< HCI: protocol error 0x07 */
OI_HCIERR_CONNECTION_TIMEOUT = 708 , /**< HCI: protocol error 0x08 */
OI_HCIERR_MAX_NUM_OF_CONNECTIONS = 709 , /**< HCI: protocol error 0x09 */
OI_HCIERR_MAX_NUM_OF_SCO_CONNECTIONS = 710 , /**< HCI: protocol error 0x0A */
OI_HCIERR_ACL_CONNECTION_ALREADY_EXISTS = 711 , /**< HCI: protocol error 0x0B */
OI_HCIERR_COMMAND_DISALLOWED = 712 , /**< HCI: protocol error 0x0C */
OI_HCIERR_HOST_REJECTED_RESOURCES = 713 , /**< HCI: protocol error 0x0D */
OI_HCIERR_HOST_REJECTED_SECURITY = 714 , /**< HCI: protocol error 0x0E */
OI_HCIERR_HOST_REJECTED_PERSONAL_DEVICE = 715 , /**< HCI: protocol error 0x0F */
OI_HCIERR_HOST_TIMEOUT = 716 , /**< HCI: protocol error 0x10 */
OI_HCIERR_UNSUPPORTED = 717 , /**< HCI: protocol error 0x11 */
OI_HCIERR_INVALID_PARAMETERS = 718 , /**< HCI: protocol error 0x12 */
OI_HCIERR_OTHER_END_USER_DISCONNECT = 719 , /**< HCI: protocol error 0x13 */
OI_HCIERR_OTHER_END_LOW_RESOURCES = 720 , /**< HCI: protocol error 0x14 */
OI_HCIERR_OTHER_END_POWERING_OFF = 721 , /**< HCI: protocol error 0x15 */
OI_HCIERR_CONNECTION_TERMINATED_LOCALLY = 722 , /**< HCI: protocol error 0x16 */
OI_HCIERR_REPEATED_ATTEMPTS = 723 , /**< HCI: protocol error 0x17 */
OI_HCIERR_PAIRING_NOT_ALLOWED = 724 , /**< HCI: protocol error 0x18 */
OI_HCIERR_UNKNOWN_LMP_PDU = 725 , /**< HCI: protocol error 0x19 */
OI_HCIERR_UNSUPPORTED_REMOTE_FEATURE = 726 , /**< HCI: protocol error 0x1A */
OI_HCIERR_SCO_OFFSET_REJECTED = 727 , /**< HCI: protocol error 0x1B */
OI_HCIERR_SCO_INTERVAL_REJECTED = 728 , /**< HCI: protocol error 0x1C */
OI_HCIERR_SCO_AIR_MODE_REJECTED = 729 , /**< HCI: protocol error 0x1D */
OI_HCIERR_INVALID_LMP_PARMS = 730 , /**< HCI: protocol error 0x1E */
OI_HCIERR_UNSPECIFIED_ERROR = 731 , /**< HCI: protocol error 0x1F */
OI_HCIERR_UNSUPPORTED_LMP_PARAMETERS = 732 , /**< HCI: protocol error 0x20 */
OI_HCIERR_ROLE_CHANGE_NOT_ALLOWED = 733 , /**< HCI: protocol error 0x21 */
OI_HCIERR_LMP_RESPONSE_TIMEOUT = 734 , /**< HCI: protocol error 0x22 */
OI_HCIERR_LMP_ERROR_TRANS_COLLISION = 735 , /**< HCI: protocol error 0x23 */
OI_HCIERR_LMP_PDU_NOT_ALLOWED = 736 , /**< HCI: protocol error 0x24 */
OI_HCIERR_ENCRYPTION_MODE_NOT_ACCEPTABLE = 737 , /**< HCI: protocol error 0x25 */
OI_HCIERR_UNIT_KEY_USED = 738 , /**< HCI: protocol error 0x26 */
OI_HCIERR_QOS_NOT_SUPPORTED = 739 , /**< HCI: protocol error 0x27 */
OI_HCIERR_INSTANT_PASSED = 740 , /**< HCI: protocol error 0x28 */
OI_HCIERR_UNIT_KEY_PAIRING_UNSUPPORTED = 741 , /**< HCI: protocol error 0x29 */
OI_HCIERR_DIFFERENT_TRANS_COLLISION = 742 , /**< HCI: protocol error 0x2A */
OI_HCIERR_RESERVED_2B = 743 , /**< HCI: protocol error 0x2B */
OI_HCIERR_QOS_UNACCEPTABLE_PARAMETER = 744 , /**< HCI: protocol error 0x2C */
OI_HCIERR_QOS_REJECTED = 745 , /**< HCI: protocol error 0x2D */
OI_HCIERR_CHANNEL_CLASSIFICATION_NS = 746 , /**< HCI: protocol error 0x2E */
OI_HCIERR_INSUFFICIENT_SECURITY = 747 , /**< HCI: protocol error 0x2F */
OI_HCIERR_PARM_OUT_OF_MANDATORY_RANGE = 748 , /**< HCI: protocol error 0x30 */
OI_HCIERR_RESERVED_31 = 749 , /**< HCI: protocol error 0x31 */
OI_HCIERR_ROLE_SWITCH_PENDING = 750 , /**< HCI: protocol error 0x32 */
OI_HCIERR_RESERVED_33 = 751 , /**< HCI: protocol error 0x33 */
OI_HCIERR_RESERVED_SLOT_VIOLATION = 752 , /**< HCI: protocol error 0x34 */
OI_HCIERR_ROLE_SWITCH_FAILED = 753 , /**< HCI: protocol error 0x35 */
OI_HCIERR_EIR_TOO_LARGE = 754 , /**< HCI: protocol error 0x36 */
OI_HCIERR_SSP_NOT_SUPPORTED_BY_HOST = 755 , /**< HCI: protocol error 0x37 */
OI_HCIERR_HOST_BUSY_PAIRING = 756 , /**< HCI: protocol error 0x38 */
OI_HCIERR_UNKNOWN_ERROR = 757 , /**< HCI: unknown error code */
OI_HCIERR_LAST_ERROR_VALUE = 757 , /**< marker for last HCI protocol error */
OI_SDP_SPEC_ERROR = 800 , /**< SDP: Base error status for mapping OI_STATUS codes to SDP errors */
OI_SDP_INVALID_SERVICE_RECORD_HANDLE = ( OI_SDP_SPEC_ERROR + 2 ) , /**< SDP: protocol error Invalid Service Record Handle */
OI_SDP_INVALID_REQUEST_SYNTAX = ( OI_SDP_SPEC_ERROR + 3 ) , /**< SDP: protocol error Invalid Request Syntax */
OI_SDP_INVALID_PDU_SIZE = ( OI_SDP_SPEC_ERROR + 4 ) , /**< SDP: protocol error Invalid PDU Size */
OI_SDP_INVALID_CONTINUATION_STATE = ( OI_SDP_SPEC_ERROR + 5 ) , /**< SDP: protocol error Invalid Continuation State */
OI_SDP_INSUFFICIENT_RESOURCES = ( OI_SDP_SPEC_ERROR + 6 ) , /**< SDP: protocol error Insufficient Resources */
OI_SDP_ERROR = 807 , /**< SDP: server returned an error code */
OI_SDP_CORRUPT_DATA_ELEMENT = 808 , /**< SDP: Invalid or corrupt data element representation */
OI_SDP_SERVER_NOT_CONNECTED = 810 , /**< SDP: Attempt to disconnect from an unconnected server */
OI_SDP_ACCESS_DENIED = 811 , /**< SDP: Server denied access to server */
OI_SDP_ATTRIBUTES_OUT_OF_ORDER = 812 , /**< SDP: Attributes in attribute list not in ascending order */
OI_SDP_DEVICE_DOES_NOT_SUPPORT_SDP = 813 , /**< SDP: Tried to connect to a device that does not support SDP */
OI_SDP_NO_MORE_DATA = 815 , /**< SDP: Server does not have more continuation data */
OI_SDP_REQUEST_PARAMS_TOO_LONG = 816 , /**< SDP: Parameters for a request exceed the L2CAP buffer size */
OI_SDP_REQUEST_PENDING = 817 , /**< SDP: Cannot make a request when another request is being processed */
OI_SDP_SERVER_CONNECT_FAILED = 819 , /**< SDP: Failed attempt to connect to an SDP server */
OI_SDP_SERVER_TOO_MANY_CONNECTIONS = 821 , /**< SDP: Exceeded maximum number of simultaneous server connections */
OI_SDP_NO_MATCHING_SERVICE_RECORD = 823 , /**< SDP: No service record matched the UUID list */
OI_SDP_PARTIAL_RESPONSE = 824 , /**< SDP: Internal use only */
OI_SDP_ILLEGAL_ARGUMENT = 825 , /**< SDP: Illegal argument passed to an SDP function */
OI_SDP_ATTRIBUTE_NOT_FOUND = 826 , /**< SDP: A requested attribute was not found in a service record */
OI_SDP_DATABASE_OUT_OF_RESOURCES = 827 , /**< SDP: server database is out of memory */
OI_SDP_SHORT_PDU = 829 , /**< SDP: Not enough bytes in the packet */
OI_SDP_TRANSACTION_ID_MISMATCH = 830 , /**< SDP: Transaction Id was not as expected */
OI_SDP_UNEXPECTED_RESPONSE_PDU_ID = 831 , /**< SDP: Did not expect this response PDU */
OI_SDP_REQUEST_TIMEOUT = 832 , /**< SDP: Did not get a response within the timeout period */
OI_SDP_INVALID_RESPONSE_SYNTAX = 833 , /**< SDP: Response is not correctly formatted */
OI_SDP_CONNECTION_TIMEOUT = 834 , /**< SDP: Connection attempt timed out at a lower layer */
OI_SDP_RESPONSE_DATA_ERROR = 835 , /**< SDP: Response to a service request appears to be corrupt */
OI_SDP_TOO_MANY_ATTRIBUTE_BYTES = 836 , /**< SDP: Response contained more bytes than requested. */
OI_SDP_TOO_MANY_SERVICE_RECORDS = 837 , /**< SDP: Response contained more service records than requested. */
OI_SDP_INVALID_CONNECTION_ID = 838 , /**< SDP: Invalid connection ID in an SDP request */
OI_SDP_CANNOT_SET_ATTRIBUTE = 839 , /**< SDP: Attempt to set a dynamic attribute value failed */
OI_SDP_BADLY_FORMED_ATTRIBUTE_VALUE = 840 , /**< SDP: An attribute value has the wrong type or structure */
OI_SDP_NO_ATTRIBUTE_LIST_TO_REMOVE = 841 , /**< SDP: Attempt to remove a non-existent attribute list from a service record */
OI_SDP_ATTRIBUTE_LIST_ALREADY_ADDED = 842 , /**< SDP: An attribute list has already been added to the service record */
OI_SDP_DATA_ELEMENT_TRUNCATED = 843 , /**< SDP: Data element truncated (too few bytes) */
OI_RFCOMM_WRITE_IN_PROGRESS = 901 , /**< RFCOMM: Write in progress */
OI_RFCOMM_INVALID_BAUDRATE = 903 , /**< RFCOMM: Invalid baudrate */
OI_RFCOMM_INVALID_DATABIT = 904 , /**< RFCOMM: Invalid databit */
OI_RFCOMM_INVALID_STOPBIT = 905 , /**< RFCOMM: Invalid stopbit */
OI_RFCOMM_INVALID_PARITY = 906 , /**< RFCOMM: Invalid parity */
OI_RFCOMM_INVALID_PARITYTYPE = 907 , /**< RFCOMM: Invalid paritytype */
OI_RFCOMM_INVALID_FLOWCONTROL = 908 , /**< RFCOMM: Invalid flowcontrol */
OI_RFCOMM_SESSION_EXISTS = 909 , /**< RFCOMM: Session exists */
OI_RFCOMM_INVALID_CHANNEL = 910 , /**< RFCOMM: Invalid channel */
OI_RFCOMM_DLCI_EXISTS = 911 , /**< RFCOMM: DLCI exists */
OI_RFCOMM_LINK_NOT_FOUND = 912 , /**< RFCOMM: Link not found */
OI_RFCOMM_REMOTE_REJECT = 913 , /**< RFCOMM: Remote reject */
OI_RFCOMM_TEST_IN_PROGRESS = 915 , /**< RFCOMM: Test in progress */
OI_RFCOMM_SESSION_NOT_FOUND = 916 , /**< RFCOMM: Session not found */
OI_RFCOMM_INVALID_PACKET = 917 , /**< RFCOMM: Invalid packet */
OI_RFCOMM_FRAMESIZE_EXCEEDED = 918 , /**< RFCOMM: Framesize exceeded */
OI_RFCOMM_INVALID_DLCI = 920 , /**< RFCOMM: Invalid dlci */
OI_RFCOMM_SERVER_NOT_REGISTERED = 921 , /**< RFCOMM: Server not registered */
OI_RFCOMM_CREDIT_ERROR = 922 , /**< RFCOMM: Credit error */
OI_RFCOMM_NO_CHANNEL_NUMBER = 923 , /**< RFCOMM: No channel number */
OI_RFCOMM_QUERY_IN_PROGRESS = 924 , /**< RFCOMM: Query in progress */
OI_RFCOMM_SESSION_SHUTDOWN = 925 , /**< RFCOMM: Session shutdown */
OI_RFCOMM_LOCAL_DEVICE_DISCONNECTED = 926 , /**< RFCOMM: Local device disconnected */
OI_RFCOMM_REMOTE_DEVICE_DISCONNECTED = 927 , /**< RFCOMM: Remote device disconnected */
OI_RFCOMM_OUT_OF_SERVER_CHANNELS = 928 , /**< RFCOMM: Out of server channels */
OI_DISPATCH_INVALID_CB_HANDLE = 1001 , /**< Dispatcher was handed an invalid callback handle */
OI_DISPATCH_TABLE_OVERFLOW = 1002 , /**< Dispatcher table is full */
OI_TEST_UNKNOWN_TEST = 1101 , /**< TEST: Unknown test */
OI_TEST_FAIL = 1102 , /**< TEST: Fail */
OI_HCITRANS_CANNOT_CONNECT_TO_DEVICE = 1201 , /**< TRANSPORT: Cannot connect to device */
OI_HCITRANS_BUFFER_TOO_SMALL = 1203 , /**< TRANSPORT: Buffer too small */
OI_HCITRANS_NULL_DEVICE_HANDLE = 1204 , /**< TRANSPORT: Null device handle */
OI_HCITRANS_IO_ERROR = 1205 , /**< TRANSPORT: IO error */
OI_HCITRANS_DEVICE_NOT_READY = 1206 , /**< TRANSPORT: Device not ready */
OI_HCITRANS_FUNCTION_NOT_SUPPORTED = 1207 , /**< TRANSPORT: Function not supporteD */
OI_HCITRANS_ACCESS_DENIED = 1209 , /**< TRANSPORT: win32 */
OI_HCITRANS_ACL_DATA_ERROR = 1210 , /**< TRANSPORT: ACL data error */
OI_HCITRANS_SCO_DATA_ERROR = 1211 , /**< TRANSPORT: SCO data error */
OI_HCITRANS_EVENT_DATA_ERROR = 1212 , /**< TRANSPORT: HCI event data error */
OI_HCITRANS_INTERNAL_ERROR = 1214 , /**< TRANSPORT: Internal error in the transport */
OI_HCITRANS_LINK_NOT_ACTIVE = 1215 , /**< TRANSPORT: Link to the device is not currently active */
OI_HCITRANS_INITIALIZING = 1216 , /**< TRANSPORT: Transport is initializing */
OI_DEVMGR_NO_CONNECTION = 1301 , /**< DEVMGR: No connection */
OI_DEVMGR_HARDWARE_ERROR = 1305 , /**< DEVMGR: error reported by HCI */
OI_DEVMGR_PENDING_CONNECT_LIST_FULL = 1307 , /**< DEVMGR: Pending connect list full */
OI_DEVMGR_CONNECTION_LIST_FULL = 1309 , /**< DEVMGR: Connection list full */
OI_DEVMGR_NO_SUCH_CONNECTION = 1310 , /**< DEVMGR: No such connection */
OI_DEVMGR_INQUIRY_IN_PROGRESS = 1311 , /**< DEVMGR: Inquiry in progress */
OI_DEVMGR_PERIODIC_INQUIRY_ACTIVE = 1312 , /**< DEVMGR: Periodic inquiry active */
OI_DEVMGR_NO_INQUIRIES_ACTIVE = 1313 , /**< DEVMGR: can not cancel/exit if not active */
OI_DEVMGR_DUPLICATE_CONNECTION = 1314 , /**< DEVMGR: internal error */
OI_DEVMGR_DUPLICATE_EVENT_CALLBACK = 1316 , /**< DEVMGR: attempt to register same callback twice */
OI_DEVMGR_EVENT_CALLBACK_LIST_FULL = 1317 , /**< DEVMGR: can not register event callback, list is full */
OI_DEVMGR_EVENT_CALLBACK_NOT_FOUND = 1318 , /**< DEVMGR: attempt to unregister callback failed */
OI_DEVMGR_BUSY = 1319 , /**< DEVMGR: some operations can only execute one at a time */
OI_DEVMGR_ENUM_UNEXPECTED_INQ_COMPLETE = 1320 , /**< DEVMGR: inquiry complete event in inappropriate enumeration state */
OI_DEVMGR_ENUM_UNEXPECTED_INQ_RESULT = 1321 , /**< DEVMGR: inquiry result event in inappropriate enumeration state */
OI_DEVMGR_ENUM_DATABASE_FULL = 1322 , /**< DEVMGR: device enumeration, database is full, couldn't add a new device */
OI_DEVMGR_ENUM_INQUIRIES_OVERLAP = 1323 , /**< DEVMGR: device enumeration, periodic inquiries occurring too close together */
OI_DEVMGR_UNKNOWN_LINK_TYPE = 1324 , /**< DEVMGR: HCI connect request with unkown link type */
OI_DEVMGR_PARAM_IO_ACTIVE = 1325 , /**< DEVMGR: request for parameter read/write while param read/write active */
O I_DEVMGR_UNKNOWN_IAC_LAP = 1326 , /**< DEVMGR: unrecognized IAC LAP */
OI_DEVMGR_SCO_ALREADY_REGISTERED = 1327 , /**< DEVMGR: only one application can use SCO */
OI_DEVMGR_SCO_NOT_REGISTERED = 1328 , /**< DEVMGR: SCO applications must register before using the API */
OI_DEVMGR_SCO_WITHOUT_ACL = 1329 , /**< DEVMGR: Got SCO connection but there is no underlying ACL connection */
OI_DEVMGR_NO_SUPPORT = 1330 , /**< DEVMGR: Request is not supported by the device */
OI_DEVMGR_WRITE_POLICY_FAILED = 1331 , /**< DEVMGR: connection attempt failed - unable to write link policy */
OI_DEVMGR_NOT_IN_MASTER_MODE = 1332 , /**< DEVMGR: OI_DEVMGR EndMasterMode without prior OI_DEVMGR_BeginMasterMode */
OI_DEVMGR_POLICY_VIOLATION = 1333 , /**< DEVMGR: low-power request is rejected - link policy does not allow it */
OI_DEVMGR_BUSY_TIMEOUT = 1334 , /**< DEVMGR: queued operation timed out while in the queue; \n
timeout configurable via @ ref OI_CONFIG_DEVMGR : : connectQueueTimeoutSecs " connectQueueTimeoutSecs " */
OI_DEVMGR_REENCRYPT_FAILED = 1335 , /**< DEVMGR: failed to re-encrypt link after role switch */
OI_DEVMGR_ROLE_POLICY_CONFLICT = 1336 , /**< DEVMGR: requested role conflicts with current policy */
OI_DEVMGR_BAD_INTERVAL = 1337 , /**< DEVMGR: current linkTO outside range of requested min/max interval */
OI_DEVMGR_INVALID_SCO_HANDLE = 1338 , /**< DEVMGR: HCI SCO event, invalid handle */
OI_DEVMGR_CONNECTION_OVERLAP = 1339 , /**< DEVMGR: Connection failed due to race condition with remote side */
OI_DEVMGR_ORPHAN_SUBRATE_COMPLETE = 1340 , /**< DEVMGR: sniff subrate complete, but no callback */
OI_DEVMGR_EIR_RESPONSE_2_LARGE = 1341 , /**< DEVMGR: eir builder, response length would exceed spec max */
OI_SECMGR_NO_POLICY = 1401 , /**< SECMGR: no security policy has been established */
OI_SECMGR_INTERNAL_ERROR = 1402 , /**< SECMGR: internal inconsistency */
OI_SECMGR_ORPHANED_CALLBACK = 1403 , /**< SECMGR: we've been called back, but CB context is gone */
OI_SECMGR_BUSY = 1404 , /**< SECMGR: configure and access request cannot be concurrent */
OI_SECMGR_DEVICE_NOT_TRUSTED = 1405 , /**< SECMGR: l2cap access denied - device is not trusted */
OI_SECMGR_DEVICE_ENCRYPT_FAIL = 1407 , /**< SECMGR: l2cap access denied - failed to start encryption */
OI_SECMGR_DISCONNECTED_FAIL = 1408 , /**< SECMGR: l2cap access denied - disconnected */
OI_SECMGR_ACCESS_PENDING = 1409 , /**< SECMGR: l2cap access request is still pending */
OI_SECMGR_PIN_CODE_TOO_SHORT = 1410 , /**< SECMGR: Higher-layer process gave us a pin code that is too short */
OI_SECMGR_UNKNOWN_ENCRYPT_VALUE = 1411 , /**< SECMGR: got EncryptionChange event, unknown encryption enable value */
OI_SECMGR_INVALID_POLICY = 1412 , /**< SECMGR: the specified security policy is not valid for security mode */
OI_SECMGR_AUTHORIZATION_FAILED = 1413 , /**< SECMGR: device authorization failed */
OI_SECMGR_ENCRYPTION_FAILED = 1414 , /**< SECMGR: device encryption failed */
OI_SECMGR_UNIT_KEY_UNSUPPORTED = 1415 , /**< SECMGR: authentication failed due to non-support of unit keys */
OI_SECMGR_NOT_REGISTERED = 1416 , /**< SECMGR: required registrations have not yet occurred */
OI_SECMGR_ILLEGAL_WRITE_SSP_MODE = 1417 , /**< SECMGR: 2.1 HCI spec does not allow SSP mode to be disabled */
OI_SECMGR_INVALID_SEC_LEVEL = 1418 , /**< SECMGR: security level for a service is not a valid value */
OI_SECMGR_INSUFFICIENT_LINK_KEY = 1419 , /**< SECMGR: link key type is not sufficient to meet service requirements */
OI_SECMGR_INVALID_KEY_TYPE = 1420 , /**< SECMGR: link key type is not a valid value */
OI_SECMGR_SSP_NOT_ENCRYPTED = 1421 , /**< SECMGR: ssp required encryption on incoming link */
OI_SECMGR_ORPHAN_EVENT = 1422 , /**< SECMGR: some HCI security event unrelated to current processes */
OI_SECMGR_NOT_BONDABLE = 1423 , /**< SECMGR: not in bondable mode */
OI_TCS_INVALID_ELEMENT_TYPE = 1602 , /**< TCS: element type is invalid */
OI_TCS_INVALID_PACKET = 1603 , /**< TCS: packet is invalide */
OI_TCS_CALL_IN_PROGRESS = 1604 , /**< TCS: call is in progress */
OI_TCS_NO_CALL_IN_PROGRESS = 1605 , /**< TCS: no call in progress */
OI_OBEX_CONTINUE = 1701 , /**< OBEX: Continue processing OBEX request */
OI_OBEX_COMMAND_ERROR = 1702 , /**< OBEX: An unrecognized OBEX command opcode */
OI_OBEX_CONNECTION_TIMEOUT = 1703 , /**< OBEX: Timeout waiting for a response to a request */
OI_OBEX_CONNECT_FAILED = 1704 , /**< OBEX: An OBEX connection request did not succeed */
OI_OBEX_DISCONNECT_FAILED = 1705 , /**< OBEX: A disconnect failed probably because the connection did not exist */
OI_OBEX_ERROR = 1706 , /**< OBEX: Unspecified OBEX error */
OI_OBEX_INCOMPLETE_PACKET = 1707 , /**< OBEX: Packet too short or corrupt */
OI_OBEX_LENGTH_REQUIRED = 1708 , /**< OBEX: Length header required in OBEX command */
OI_OBEX_NOT_CONNECTED = 1709 , /**< OBEX: No connection to OBEX server */
OI_OBEX_NO_MORE_CONNECTIONS = 1710 , /**< OBEX: Reached max connections limit */
OI_OBEX_OPERATION_IN_PROGRESS = 1711 , /**< OBEX: Another operation is still in progress on a connection */
OI_OBEX_PUT_RESPONSE_ERROR = 1712 , /**< OBEX: An error in the response to a PUT command */
OI_OBEX_GET_RESPONSE_ERROR = 1713 , /**< OBEX: An error in the response to a GET command */
OI_OBEX_REQUIRED_HEADER_NOT_FOUND = 1714 , /**< OBEX: packet was missing a required header */
OI_OBEX_SERVICE_UNAVAILABLE = 1715 , /**< OBEX: Unown OBEX target or required service */
OI_OBEX_TOO_MANY_HEADER_BYTES = 1716 , /**< OBEX: Headers will not fit in single OBEX packet */
OI_OBEX_UNKNOWN_COMMAND = 1717 , /**< OBEX: Unrecognized OBEX command */
OI_OBEX_UNSUPPORTED_VERSION = 1718 , /**< OBEX: Version mismatch */
OI_OBEX_CLIENT_ABORTED_COMMAND = 1719 , /**< OBEX: server received abort command */
OI_OBEX_BAD_PACKET = 1720 , /**< OBEX: Any malformed OBEX packet */
OI_OBEX_BAD_REQUEST = 1721 , /**< OBEX: Maps to OBEX response of the same name */
OI_OBEX_OBJECT_OVERFLOW = 1723 , /**< OBEX: Too many bytes received. */
OI_OBEX_NOT_FOUND = 1724 , /**< OBEX: Maps to obex response of same name */
OI_OBEX_ACCESS_DENIED = 1735 , /**< OBEX: Object could not be read or written. */
OI_OBEX_VALUE_NOT_ACCEPTABLE = 1736 , /**< OBEX: Value in a command was not in the acceptable range. */
OI_OBEX_PACKET_OVERFLOW = 1737 , /**< OBEX: Buffer will not fit in a single OBEX packet. */
OI_OBEX_NO_SUCH_FOLDER = 1738 , /**< OBEX: Error returned by a setpath operation. */
OI_OBEX_NAME_REQUIRED = 1739 , /**< OBEX: Name must be non-null and non-empty. */
OI_OBEX_PASSWORD_TOO_LONG = 1740 , /**< OBEX: Password exceeds implementation imposed length limit. */
OI_OBEX_PRECONDITION_FAILED = 1741 , /**< OBEX: response Precondition Failed */
OI_OBEX_UNAUTHORIZED = 1742 , /**< OBEX: authentication was not successful. */
OI_OBEX_NOT_IMPLEMENTED = 1743 , /**< OBEX: Unimplemented feature. */
OI_OBEX_INVALID_AUTH_DIGEST = 1744 , /**< OBEX: An authentication digest was bad. */
OI_OBEX_INVALID_OPERATION = 1745 , /**< OBEX: Operation not allowed at this time. */
OI_OBEX_DATABASE_FULL = 1746 , /**< OBEX: Sync database full. */
OI_OBEX_DATABASE_LOCKED = 1747 , /**< OBEX: Sync database locked. */
OI_OBEX_INTERNAL_SERVER_ERROR = 1748 , /**< OBEX: response Internal Server Error */
OI_OBEX_UNSUPPORTED_MEDIA_TYPE = 1749 , /**< OBEX: response Unsupported Media Type */
OI_OBEX_PARTIAL_CONTENT = 1750 , /**< OBEX: response Partial Content */
OI_OBEX_METHOD_NOT_ALLOWED = 1751 , /**< OBEX: response Method Not Allowed */
OI_OBEXSRV_INCOMPLETE_GET = 1752 , /**< OBEX: Indicates to a GET handler that the request phase is still in progress */
OI_OBEX_FOLDER_BROWSING_NOT_ALLOWED = 1753 , /**< OBEX: Indicates that an FTP server does not allow folder browsing */
OI_OBEX_SERVER_FORCED_DISCONNECT = 1754 , /**< OBEX: connection was forcibly terminated by the server */
OI_OBEX_OFS_ERROR = 1755 , /**< OBEX: OPP object file system error occurred */
OI_OBEX_FILEOP_ERROR = 1756 , /**< OBEX: FTP/PBAP file operation system error occurred */
OI_OBEX_USERID_TOO_LONG = 1757 , /**< OBEX: User Id exceeds spec limited length limit. */
OI_HANDSFREE_EVENT_REPORTING_DISABLED = 1801 , /**< HANDSFREE: Event reporting disabled */
OI_HANDSFREE_NOT_CONNECTED = 1802 , /**< HANDSFREE: Not connected */
OI_HANDSFREE_SERVICE_NOT_STARTED = 1803 , /**< HANDSFREE: Cannot connect to handsfree AG if handsfree service not started */
OI_HANDSFREE_AG_SERVICE_NOT_STARTED = 1804 , /**< HANDSFREE: Cannot connect to handsfree device if handsfree AG service not started */
OI_HANDSFREE_COMMAND_IN_PROGRESS = 1805 , /**< HANDSFREE: Cannot accept a command at this time */
OI_HANDSFREE_AUDIO_ALREADY_CONNECTED = 1806 , /**< HANDSFREE: Audio is already connected */
OI_HANDSFREE_AUDIO_NOT_CONNECTED = 1807 , /**< HANDSFREE: Audio is not connected */
OI_HANDSFREE_FEATURE_NOT_SUPPORTED = 1808 , /**< HANDSFREE: Local or remote feature not supported for requested command */
OI_HEADSET_SERVICE_NOT_STARTED = 1901 , /**< HEADSET: Cannot connect to headset AG if headset service not started */
OI_HEADSET_AG_SERVICE_NOT_STARTED = 1902 , /**< HEADSET: Cannot connect to headset device if headset AG service not started */
OI_HEADSET_COMMAND_IN_PROGRESS = 1903 , /**< HEADSET: Cannot accept a command at this time */
OI_BNEP_INVALID_MTU = 2001 , /**< BNEP: The remote device cannot support the minimum BNEP MTU */
OI_BNEP_SETUP_TIMEOUT = 2002 , /**< BNEP: The setup request timed out. */
OI_BNEP_SERVICE_NOT_REGISTERED = 2003 , /**< BNEP: The requested service was not found. */
OI_BNEP_INVALID_HANDLE = 2004 , /**< BNEP: The specified connection handle is not valid. */
OI_BNEP_RESPONSE_TIMEOUT = 2005 , /**< BNEP: The timer for receiving a response has expired. */
OI_BNEP_INVALID_CONNECTION = 2006 , /**< BNEP: Invalid connection */
OI_BNEP_INVALID_FILTER = 2007 , /**< BNEP: The supplied filter was invalid. */
OI_BNEP_CONNECTION_EXISTS = 2008 , /**< BNEP: An attempt was made to create a duplicate connection. */
OI_BNEP_NOT_INITIALIZED = 2009 , /**< BNEP: Init has not been called */
OI_BNEP_CONNECT_BASE = 2010 , /**< BNEP: connection response codes */
OI_BNEP_CONNECT_FAILED_INVALID_DEST_UUID = 2011 , /**< BNEP: connect response code Invalid Dest UUID */
OI_BNEP_CONNECT_FAILED_INVALID_SOURCE_UUID = 2012 , /**< BNEP: connect response code Invalid Source UUID */
OI_BNEP_CONNECT_FAILED_INVALID_UUID_SIZE = 2013 , /**< BNEP: connect response code Invalid UUID Size */
OI_BNEP_CONNECT_FAILED_NOT_ALLOWED = 2014 , /**< BNEP: connect response code Not Allowed */
OI_BNEP_FILTER_NET_BASE = 2020 , /**< BNEP: filter response codes */
OI_BNEP_FILTER_NET_UNSUPPORTED_REQUEST = 2021 , /**< BNEP: filter response code Unsupported Request */
OI_BNEP_FILTER_NET_FAILED_INVALID_PROTOCOL_TYPE = 2022 , /**< BNEP: filter response code Invalid Protocol Type */
OI_BNEP_FILTER_NET_FAILED_MAX_LIMIT_REACHED = 2023 , /**< BNEP: filter response code Max Limit Reached */
OI_BNEP_FILTER_NET_FAILED_SECURITY = 2024 , /**< BNEP: filter response code Security */
OI_BNEP_FILTER_MULTI_BASE = 2030 , /**< BNEP: multicast response codes */
OI_BNEP_FILTER_MULTI_UNSUPPORTED_REQUEST = 2031 , /**< BNEP: multicast response code Unsupported Request */
OI_BNEP_FILTER_MULTI_FAILED_INVALID_ADDRESS = 2032 , /**< BNEP: multicast response code Invalid Address */
OI_BNEP_FILTER_MULTI_FAILED_MAX_LIMIT_REACHED = 2033 , /**< BNEP: multicast response code Max Limit Reached */
OI_BNEP_FILTER_MULTI_FAILED_SECURITY = 2034 , /**< BNEP: multicast response code Security */
OI_BNEP_LOCAL_DEVICE_MUST_BE_MASTER = 2040 , /**< BNEP: Device must be master of the piconet for this function */
OI_BNEP_PACKET_FILTERED_OUT = 2041 , /**< BNEP: Packet did not pass current filters */
OI_NETIFC_UP_FAILED = 2101 , /**< NETIFC: Could not bring up network interface */
OI_NETIFC_COULD_NOT_CREATE_THREAD = 2102 , /**< NETIFC: Network interface could not create a read thread */
OI_NETIFC_INITIALIZATION_FAILED = 2103 , /**< NETIFC: Error in network interface initialization */
OI_NETIFC_INTERFACE_ALREADY_UP = 2104 , /**< NETIFC: Network interface is already up */
OI_NETIFC_INTERFACE_NOT_UP = 2105 , /**< NETIFC: Network interface is not up */
OI_NETIFC_PACKET_TOO_BIG = 2106 , /**< NETIFC: The packet is too big */
OI_PAN_ROLE_ALREADY_REGISTERED = 2201 , /**< PAN: This PAN role was already registered */
OI_PAN_ROLE_NOT_ALLOWED = 2202 , /**< PAN: The PAN role is not currently allowed */
OI_PAN_INCOMPATIBLE_ROLES = 2203 , /**< PAN: Only certain local and remote role combinations are permitted */
OI_PAN_INVALID_ROLE = 2204 , /**< PAN: Role specified is not one the defined PAN roles */
OI_PAN_CONNECTION_IN_PROGRESS = 2205 , /**< PAN: A PAN connection is currently being established */
OI_PAN_USER_ALREADY_CONNECTED = 2206 , /**< PAN: PAN user role only allows a single connection */
OI_PAN_DEVICE_CONNECTED = 2207 , /**< PAN: A PAN connection already exists to specified device */
OI_CODEC_SBC_NO_SYNCWORD = 2301 , /**< CODEC: Couldn't find an SBC SYNCWORD */
OI_CODEC_SBC_NOT_ENOUGH_HEADER_DATA = 2302 , /**< CODEC: Not enough data provided to decode an SBC header */
OI_CODEC_SBC_NOT_ENOUGH_BODY_DATA = 2303 , /**< CODEC: Decoded the header, but not enough data to contain the rest of the frame */
OI_CODEC_SBC_NOT_ENOUGH_AUDIO_DATA = 2304 , /**< CODEC: Not enough audio data for this frame */
OI_CODEC_SBC_CHECKSUM_MISMATCH = 2305 , /**< CODEC: The frame header didn't match the checksum */
OI_CODEC_SBC_PARTIAL_DECODE = 2306 , /**< CODEC: Decoding was successful, but frame data still remains. Next call will provide audio without consuming input data. */
OI_FIFOQ_QUEUE_NOT_ALIGNED = 2401 , /**< FIFOQ: queue must be 32-bit aligned */
OI_FIFOQ_INVALID_Q = 2402 , /**< FIFOQ: queue parameter is not a valid queue */
OI_FIFOQ_BUF_TOO_LARGE = 2403 , /**< FIFOQ: attempt to queue a buffer which is too large */
OI_FIFOQ_FULL = 2404 , /**< FIFOQ: enqueue() failed, queue is full */
OI_FIFOQ_NOT_ALLOCATED = 2405 , /**< FIFOQ: Enqueue QBuf() failed, buffer not allocated */
OI_FIFOQ_INVALID_DATA_PTR = 2406 , /**< FIFOQ: Enqueue QBuf() failed, data pointer does not match */
OI_HID_HOST_SERVICE_NOT_STARTED = 2601 , /**< HID: Cannot connect to a HID device unless HID host is started */
OI_HID_DEVICE_SERVICE_NOT_STARTED = 2602 , /**< HID: Cannot connect to a HID host unless HID device is started */
OI_AT_ERROR = 2701 , /**< AT: ERROR response */
OI_AT_NO_CARRIER = 2702 , /**< AT: NO CARRIER response */
OI_AT_BUSY = 2703 , /**< AT: BUSY response */
OI_AT_NO_ANSWER = 2704 , /**< AT: NO ANSWER response */
OI_AT_DELAYED = 2705 , /**< AT: DELAYED response */
OI_AT_BLACKLISTED = 2706 , /**< AT: BLACKLISTED response */
OI_AT_CME_ERROR = 2707 , /**< AT: +CME ERROR response */
OI_AT_CMS_ERROR = 2708 , /**< AT: +CMS ERROR response */
OI_BLST_CHARACTER_TIMEOUT = 2801 , /**< BLST: Timeout expired while waiting for a character from the client. */
OI_BLST_ACKNOWLDGE_TIMEOUT = 2802 , /**< BLST: Timeout expired while waiting for event acknowledgment from the client */
OI_BLST_TX_NOT_READY = 2803 , /**< BLST: BLST is not ready to send a BHAPI message to the client. */
OI_BLST_TX_BUSY = 2804 , /**< BLST: BLST transmit buffer is in use. */
OI_AVDTP_CONNECTION_SEQ_ERROR = 2901 , /**< AVDTP: sequencing of signalling/media channel connections broken. */
OI_AVDTP_OUT_OF_RESOURCES = 2902 , /**< AVDTP: Tried to allocate too many endpoints or signalling channels. */
OI_PBAP_REPOSITORY_NOT_SET = 3001 , /**< PBAP: Phonebook repository must be set for operation to complete. */
OI_PBAP_PHONEBOOK_NOT_SET = 3002 , /**< PBAP: Phonebook be set for operation to complete. */
OI_AADP_BAD_ENDPOINT = 3101 , /**< AADP: Invalid local endpoint specified */
OI_AADP_BAD_STATE = 3102 , /**< AADP: AADP State is not correct for this operation. */
OI_UNICODE_INVALID_SOURCE = 3200 , /**< Unicode Conversion: Source string has invalid character encoding. */
OI_UNICODE_SOURCE_EXHAUSTED = 3201 , /**< Unicode Conversion: Incomplete Unicode character at end of source buffer. */
OI_UNICODE_DESTINATION_EXHAUSTED = 3202 , /**< Unicode Conversion: Destination buffer not large enough to hold resulting Unicode string. */
OI_AVRCP_TOO_MANY_CONNECTIONS = 3300 , /**< AVRCP: Exceeded maximum number of simultaneous AVCTP connections. */
OI_AVRCP_NOT_IMPLEMENTED = 3301 , /**< AVRCP: The target does not implement the command specified by the opcode and operand. */
OI_AVRCP_REJECTED = 3302 , /**< AVRCP: The target cannot respond because of invalid operands in command packet. */
OI_AVRCP_INVALID_RESPONSE = 3303 , /**< AVRCP: The controller received the response with invalid parameters */
OI_AVRCP_RESPONSE_PACKET_OVERFLOW = 3304 , /**< AVRCP: The response message does not fir in one AVRCP packet (512 bytes), has to be fragmented. */
OI_AVRCP_RESPONSE_INVALID_PDU = 3305 , /**< AVRCP: Command rejected: target received a PDU that it did not understand. */
OI_AVRCP_RESPONSE_INVALID_PARAMETER = 3306 , /**< AVRCP: Command rejected: target received a PDU with a parameter ID that it did not understand. */
OI_AVRCP_RESPONSE_PARAMETER_NOT_FOUND = 3307 , /**< AVRCP: Command rejected: specified parameter not found, sent if the parameter ID is understood, but content is wrong or corrupted.*/
OI_AVRCP_RESPONSE_INTERNAL_ERROR = 3308 , /**< AVRCP: Command rejected: target detected other error conditions. */
OI_MAX_BM3_STATUS_VAL , /* Maximum BM3 status code */
/* Status code values reserved for BM3 SDK platform-specific implementations */
OI_STATUS_RESERVED_FOR_BCOT = 9000 ,
/* Status code values reserved for BHAPI products */
OI_STATUS_RESERVED_FOR_BHAPI = 9200 ,
/* Status code values reserved for Soundabout products */
2016-11-26 05:09:55 +00:00
OI_STATUS_RESERVED_FOR_SOUNDABOUT = 9400 ,
2016-11-04 07:08:30 +00:00
/*
* Status code values greater than or equal to this value are reserved for use by applications .
* However , because of differences between compilers , and differences between 16 - bit and 32 - bit
* platforms custom status codes should be in the 16 - bit range , so status codes can range from 0
* to 65534 , inclusive ( 65535 is reserved )
*/
OI_STATUS_RESERVED_FOR_APPS = 10000 ,
OI_STATUS_NONE = 0xffff /**< Special status code to indicate that there is no status. (Only to be used for special cases involving OI_SLOG_ERROR() and OI_SLOG_WARNING().) */
} OI_STATUS ;
/* Remeber to update the #define below when new reserved blocks are added to
* the list above . */
# define OI_NUM_RESERVED_STATUS_BLOCKS 4 /**< Number of status code blocks reserved, including user apps */
/**
* Test for success
*/
# define OI_SUCCESS(x) ((x) == OI_OK)
/*****************************************************************************/
# ifdef __cplusplus
}
# endif
/**@}*/
# endif /* _OI_STATUS_H */