282 lines
11 KiB
C
282 lines
11 KiB
C
|
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
||
|
|
//
|
||
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
||
|
|
// you may not use this file except in compliance with the License.
|
||
|
|
// You may obtain a copy of the License at
|
||
|
|
|
||
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
||
|
|
//
|
||
|
|
// Unless required by applicable law or agreed to in writing, software
|
||
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
// See the License for the specific language governing permissions and
|
||
|
|
// limitations under the License.
|
||
|
|
|
||
|
|
#ifndef _DRIVER_LEDC_PWM_H_
|
||
|
|
#define _DRIVER_LEDC_PWM_H_
|
||
|
|
|
||
|
|
#include "soc/soc.h"
|
||
|
|
#include "soc/ledc_reg.h"
|
||
|
|
#include "driver/gpio.h"
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*--------------------------------------------------
|
||
|
|
HSCHX_LEDC_PWM
|
||
|
|
---------------------------------------------------*/
|
||
|
|
#define LEDC_HSCHX_CONF0_REG(CHANNEL) (LEDC_HSCH0_CONF0_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_HSCHX_HPOINT_REG(CHANNEL) (LEDC_HSCH0_HPOINT_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_HSCHX_DUTY_REG(CHANNEL) (LEDC_HSCH0_DUTY_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_HSCHX_CONF1_REG(CHANNEL) (LEDC_HSCH0_CONF1_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_HSCHX_DUTY_R_REG(CHANNEL) (LEDC_HSCH0_DUTY_R_REG+0X14*(CHANNEL))
|
||
|
|
/*-------------------------------------------------
|
||
|
|
LSCHX_LEDC_PWM
|
||
|
|
--------------------------------------------------*/
|
||
|
|
#define LEDC_LSCHX_CONF0_REG(CHANNEL) (LEDC_LSCH0_CONF0_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_LSCHX_HPOINT_REG(CHANNEL) (LEDC_LSCH0_HPOINT_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_LSCHX_DUTY_REG(CHANNEL) (LEDC_LSCH0_DUTY_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_LSCHX_CONF1_REG(CHANNEL) (LEDC_LSCH0_CONF1_REG+0X14*(CHANNEL))
|
||
|
|
#define LEDC_LSCHX_DUTY_R_REG(CHANNEL) (LEDC_LSCH0_DUTY_R_REG+0X14*(CHANNEL))
|
||
|
|
|
||
|
|
/*---------------------------------------------------
|
||
|
|
HTIMERX_LEDC_PWM
|
||
|
|
---------------------------------------------------*/
|
||
|
|
#define LEDC_HSTIMERX_CONF_REG(TIME) (LEDC_HSTIMER0_CONF_REG+0X08*(TIME))
|
||
|
|
#define LEDC_HSTIMERX_VALUE_REG(TIME) (LEDC_HSTIMER0_VALUE_REG+0X08*(TIME))
|
||
|
|
/*----------------------------------------------
|
||
|
|
LTIMERX_LEDC_PWM
|
||
|
|
-----------------------------------------------*/
|
||
|
|
#define LEDC_LSTIMERX_CONF_REG(TIME) (LEDC_LSTIMER0_CONF_REG+0X08*(TIME))
|
||
|
|
#define LEDC_LSTIMERX_VALUE_REG(TIME) (LEDC_LSTIMER0_VALUE_REG+0X08*(TIME))
|
||
|
|
|
||
|
|
enum ledc_pwm_mode{
|
||
|
|
LEDC_HIGH_SPEED_MODE=0, /**< Ledc high speed mode */
|
||
|
|
LEDC_LOW_SPEED_MODE, /**< Ledc low speed mode */
|
||
|
|
};
|
||
|
|
enum ledc_pwm_intr_type{
|
||
|
|
LEDC_INTR_DISABLE=0,/**< Disable ledc interrupt */
|
||
|
|
LEDC_INTR_CHANGE_END, /**< Enable ledc interrupt */
|
||
|
|
};
|
||
|
|
enum ledc_pwm_increase_direction{
|
||
|
|
LEDC_DIR_DECREASE=0,/**<ledc change decrease direction */
|
||
|
|
LEDC_DIR_INCREASE=1,/**<ledc change increase direction */
|
||
|
|
};
|
||
|
|
enum ledc_timer_source{
|
||
|
|
LEDC_TIMER0=0,/**<ledc source time TIME0 */
|
||
|
|
LEDC_TIMER1, /**<ledc source time TIME1 */
|
||
|
|
LEDC_TIMER2, /**<ledc source time TIME2 */
|
||
|
|
LEDC_TIMER3, /**<ledc source time TIME3 */
|
||
|
|
};
|
||
|
|
enum ledc_pwm_channel{
|
||
|
|
LEDC_PWM_CHANNEL0=0,/**<ledc channel 0 */
|
||
|
|
LEDC_PWM_CHANNEL1, /**<ledc channel 1 */
|
||
|
|
LEDC_PWM_CHANNEL2, /**<ledc channel 2 */
|
||
|
|
LEDC_PWM_CHANNEL3, /**<ledc channel 3 */
|
||
|
|
LEDC_PWM_CHANNEL4, /**<ledc channel 4 */
|
||
|
|
LEDC_PWM_CHANNEL5, /**<ledc channel 5 */
|
||
|
|
LEDC_PWM_CHANNEL6, /**<ledc channel 6 */
|
||
|
|
LEDC_PWM_CHANNEL7, /**<ledc channel 7 */
|
||
|
|
};
|
||
|
|
enum ledc_pwm_duty_depth{
|
||
|
|
LEDC_PWM_DUTY_DEPTH_10_BIT=10, /**<ledc pwm depth 10Bit */
|
||
|
|
LEDC_PWM_DUTY_DEPTH_11_BIT=11, /**<ledc pwm depth 11Bit */
|
||
|
|
LEDC_PWM_DUTY_DEPTH_12_BIT=12, /**<ledc pwm depth 12Bit */
|
||
|
|
LEDC_PWM_DUTY_DEPTH_13_BIT=13, /**<ledc pwm depth 13Bit */
|
||
|
|
LEDC_PWM_DUTY_DEPTH_14_BIT=14, /**<ledc pwm depth 14Bit */
|
||
|
|
LEDC_PWM_DUTY_DEPTH_15_BIT=15, /**<ledc pwm depth 15Bit */
|
||
|
|
};
|
||
|
|
typedef struct ledc_event_message{
|
||
|
|
enum ledc_pwm_mode mode;
|
||
|
|
enum ledc_pwm_channel channel;
|
||
|
|
}ledc_event_msg_t;
|
||
|
|
|
||
|
|
typedef void (*ledc_event_callback)(ledc_event_msg_t ledc_mes);
|
||
|
|
|
||
|
|
typedef struct ledc_pwm_channel_config{
|
||
|
|
gpio_num_t gpio_num;
|
||
|
|
enum ledc_pwm_channel channel;
|
||
|
|
enum ledc_pwm_intr_type intr_enable;
|
||
|
|
/*if selet same time,the fre and the ledc_depth must be same*/
|
||
|
|
enum ledc_timer_source time;
|
||
|
|
uint32_t fre_hz;
|
||
|
|
uint16_t duty;
|
||
|
|
enum ledc_pwm_duty_depth ledc_pre_depth;
|
||
|
|
}ledc_channel_config_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc common configuration
|
||
|
|
*
|
||
|
|
* User this Function,config ledc the channel output gpio_num,interrupt,source time,frequench(Hz),start duty,ledc depth
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] ledc_channel_config_t ledc_channel_config_t.gpio_num : the ledc output gpio_num,if you want to use gpio16,
|
||
|
|
* ledc_channel_config_t.gpio_num=GPIO_NUM_16
|
||
|
|
*
|
||
|
|
* ledc_channel_config_t.channel : current configuration channel
|
||
|
|
* ledc_channel_config_t.intr_enable : config interrupe ,Gradient interrupt enable or Gradient interrupt disable
|
||
|
|
* ledc_channel_config_t.time : select the time of channel, when different channel ,select same time ,their
|
||
|
|
* fre_hz and ledc_pre_depth must be same
|
||
|
|
* ledc_channel_config_t.fre_hz : ledc channel frequech(Hz),when different channel ,select same time ,their
|
||
|
|
* fre_hz and ledc_pre_depth must be same
|
||
|
|
* ledc_channel_config_t.duty : ledc channel duty,if the ledc_pre_depth = 10,the duty range is [0,2**10],
|
||
|
|
* ledc_channel_config_t.ledc_pre_depth : ledc channel duty depth when different channel ,select same time ,their
|
||
|
|
* fre_hz and ledc_pre_depth must be same
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_channel_config(enum ledc_pwm_mode mode,ledc_channel_config_t* ledc_channel_config);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc start
|
||
|
|
*
|
||
|
|
* After call ledc_pwm_set_fre,ledc_pwm_set_duty,ledc_pwm_set_gradient need to call this function
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_start(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc stop
|
||
|
|
*
|
||
|
|
* Disable ledc output,and set idle level
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_stop(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel,uint8_t idle_level);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc set fre
|
||
|
|
*
|
||
|
|
* Set ledc fre ,the unit is Hz,After the function calls the ledc_pwm_start function, the function can take effect.
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @param[in] fre_hz : set the ledc fre
|
||
|
|
*
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_set_fre(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel,uint32_t fre_hz);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc set duty
|
||
|
|
*
|
||
|
|
* Set ledc duty ,After the function calls the ledc_pwm_start function, the function can take effect.
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @param[in] duty : set the ledc duty ,if the ledc_pre_depth = 10,the duty range is [0,2**10]
|
||
|
|
*
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_set_duty(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel,uint16_t duty);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc get duty
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
*
|
||
|
|
* @return current ledc duty
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
uint32_t ledc_pwm_get_duty(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc get fre
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @return current ledc fre
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
uint32_t ledc_pwm_get_fre_hz(enum ledc_pwm_mode mode,enum ledc_pwm_channel channel);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief register ledc interrupt occur callback function
|
||
|
|
*
|
||
|
|
* User this Function,register interrupt event callback . when ledc interrupt is triggered , the event callback
|
||
|
|
* will give appliacation .ledc_event_callback is called by ledc interrupt , so the ledc_event_callback
|
||
|
|
* should be completed in a very short period of time. If you want to deal with a lot of things,Please Creat
|
||
|
|
* a task ,and post message from the gpio_event_callback to the task.
|
||
|
|
*
|
||
|
|
* @param[in] func : the func will be called,when ledc interrupt is triggered ,and the param of func is the
|
||
|
|
* ledc interrupt channl and the mode
|
||
|
|
*
|
||
|
|
*
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_register_event_callback(ledc_event_callback func);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief ledc set gradient
|
||
|
|
*
|
||
|
|
* Set ledc gradient , After the function calls the ledc_pwm_start function , the function can take effect.
|
||
|
|
*
|
||
|
|
* @param[in] mode : select the ledc mode,high mode and low mode,now we only support high mode ,next will add low mode
|
||
|
|
*
|
||
|
|
* @param[in] channel : current configuration channel
|
||
|
|
*
|
||
|
|
* @param[in] duty : set the start of the gradient duty , if the ledc_pre_depth = 10,the duty range is [0,2**10]
|
||
|
|
*
|
||
|
|
* @param[in] gradule_direction : set the direction of the gradient
|
||
|
|
*
|
||
|
|
* @param[in] gradule_num : set the number of the gradient
|
||
|
|
*
|
||
|
|
* @param[in] duty_cyle_num : set how many ledc pwm tick each time the gradient lasts
|
||
|
|
*
|
||
|
|
* @param[in] duty_scale : set gradient change amplitude
|
||
|
|
|
||
|
|
* @return None
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ledc_pwm_set_gradient(enum ledc_pwm_mode mode,uint8_t channel,uint32_t duty,enum ledc_pwm_increase_direction gradule_direction,
|
||
|
|
uint16_t gradule_num,uint16_t duty_cyle_num,uint16_t duty_scale);
|
||
|
|
/**
|
||
|
|
* @brief register ledc interrupt handler
|
||
|
|
*
|
||
|
|
* @param uint8_t ledc_intr_num : ledc interrupt num,check the info in soc.h, and please see the core-isa.h for more details
|
||
|
|
* @param void (* fn)(void* ) : intr handler function
|
||
|
|
* @param void * arg : parameter for handler
|
||
|
|
*
|
||
|
|
* @return null
|
||
|
|
*/
|
||
|
|
void ledc_intr_handler_register(uint8_t ledc_intr_num,void (* fn)(void* ),void * arg);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief default ledc interrupt init function to initialize the ledc intrrupt parameters.
|
||
|
|
*
|
||
|
|
* @param uint8_t pcnt_intr_num : ledc interrupt num,check the info in soc.h, and please see the core-isa.h for more details
|
||
|
|
*
|
||
|
|
* @return null
|
||
|
|
*/
|
||
|
|
void ledc_intr_init_default(uint8_t ledc_intr_num);
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* _DRIVER_LEDC_PWM_H_ */
|