OVMS3-idf/components/freemodbus/port/porttimer.c

137 lines
5.9 KiB
C
Raw Normal View History

/*
* FreeModbus Libary: ESP32 Port Demo Application
* Copyright (C) 2010 Christian Walter <cwalter@embedded-solutions.at>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* IF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: portother.c,v 1.1 2010/06/06 13:07:20 wolti Exp $
*/
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbport.h"
#include "driver/timer.h"
#include "sdkconfig.h"
#ifdef CONFIG_MB_TIMER_PORT_ENABLED
#define MB_US50_FREQ (20000) // 20kHz 1/20000 = 50mks
#define MB_DISCR_TIME_US (50) // 50uS = one discreet for timer
#define MB_TIMER_PRESCALLER ((TIMER_BASE_CLK / MB_US50_FREQ) - 1);
#define MB_TIMER_SCALE (TIMER_BASE_CLK / TIMER_DIVIDER) // convert counter value to seconds
#define MB_TIMER_DIVIDER ((TIMER_BASE_CLK / 1000000UL) * MB_DISCR_TIME_US - 1) // divider for 50uS
#define MB_TIMER_WITH_RELOAD (1)
static const USHORT usTimerIndex = CONFIG_MB_TIMER_INDEX; // Modbus Timer index used by stack
static const USHORT usTimerGroupIndex = CONFIG_MB_TIMER_GROUP; // Modbus Timer group index used by stack
static timg_dev_t *MB_TG[2] = {&TIMERG0, &TIMERG1};
/* ----------------------- Start implementation -----------------------------*/
static void IRAM_ATTR vTimerGroupIsr(void *param)
{
// Retrieve the interrupt status and the counter value
// from the timer that reported the interrupt
uint32_t intr_status = MB_TG[usTimerGroupIndex]->int_st_timers.val;
if (intr_status & BIT(usTimerIndex)) {
MB_TG[usTimerGroupIndex]->int_clr_timers.val |= BIT(usTimerIndex);
(void)pxMBPortCBTimerExpired(); // Timer callback function
MB_TG[usTimerGroupIndex]->hw_timer[usTimerIndex].config.alarm_en = TIMER_ALARM_EN;
}
}
#endif
BOOL xMBPortTimersInit(USHORT usTim1Timerout50us)
{
#ifdef CONFIG_MB_TIMER_PORT_ENABLED
MB_PORT_CHECK((usTim1Timerout50us > 0), FALSE,
"Modbus timeout discreet is incorrect.");
esp_err_t xErr;
timer_config_t config;
config.alarm_en = TIMER_ALARM_EN;
config.auto_reload = MB_TIMER_WITH_RELOAD;
config.counter_dir = TIMER_COUNT_UP;
config.divider = MB_TIMER_PRESCALLER;
config.intr_type = TIMER_INTR_LEVEL;
config.counter_en = TIMER_PAUSE;
// Configure timer
xErr = timer_init(usTimerGroupIndex, usTimerIndex, &config);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"timer init failure, timer_init() returned (0x%x).", (uint32_t)xErr);
// Stop timer counter
xErr = timer_pause(usTimerGroupIndex, usTimerIndex);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"stop timer failure, timer_pause() returned (0x%x).", (uint32_t)xErr);
// Reset counter value
xErr = timer_set_counter_value(usTimerGroupIndex, usTimerIndex, 0x00000000ULL);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"timer set value failure, timer_set_counter_value() returned (0x%x).",
(uint32_t)xErr);
// wait3T5_us = 35 * 11 * 100000 / baud; // the 3.5T symbol time for baudrate
// Set alarm value for usTim1Timerout50us * 50uS
xErr = timer_set_alarm_value(usTimerGroupIndex, usTimerIndex, (uint32_t)(usTim1Timerout50us));
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"failure to set alarm failure, timer_set_alarm_value() returned (0x%x).",
(uint32_t)xErr);
// Register ISR for timer
xErr = timer_isr_register(usTimerGroupIndex, usTimerIndex, vTimerGroupIsr, NULL, ESP_INTR_FLAG_IRAM, NULL);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"timer set value failure, timer_isr_register() returned (0x%x).",
(uint32_t)xErr);
#endif
return TRUE;
}
void vMBPortTimersEnable()
{
#ifdef CONFIG_MB_TIMER_PORT_ENABLED
ESP_ERROR_CHECK(timer_pause(usTimerGroupIndex, usTimerIndex));
ESP_ERROR_CHECK(timer_set_counter_value(usTimerGroupIndex, usTimerIndex, 0ULL));
ESP_ERROR_CHECK(timer_enable_intr(usTimerGroupIndex, usTimerIndex));
ESP_ERROR_CHECK(timer_start(usTimerGroupIndex, usTimerIndex));
#endif
}
void vMBPortTimersDisable()
{
#ifdef CONFIG_MB_TIMER_PORT_ENABLED
ESP_ERROR_CHECK(timer_pause(usTimerGroupIndex, usTimerIndex));
ESP_ERROR_CHECK(timer_set_counter_value(usTimerGroupIndex, usTimerIndex, 0ULL));
// Disable timer interrupt
ESP_ERROR_CHECK(timer_disable_intr(usTimerGroupIndex, usTimerIndex));
#endif
}
void vMBPortTimerClose()
{
#ifdef CONFIG_MB_TIMER_PORT_ENABLED
ESP_ERROR_CHECK(timer_pause(usTimerGroupIndex, usTimerIndex));
ESP_ERROR_CHECK(timer_disable_intr(usTimerGroupIndex, usTimerIndex));
#endif
}