710 lines
26 KiB
C
710 lines
26 KiB
C
|
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
||
|
|
//
|
||
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
||
|
|
// you may not use this file except in compliance with the License.
|
||
|
|
// You may obtain a copy of the License at
|
||
|
|
|
||
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
||
|
|
//
|
||
|
|
// Unless required by applicable law or agreed to in writing, software
|
||
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
// See the License for the specific language governing permissions and
|
||
|
|
// limitations under the License.
|
||
|
|
|
||
|
|
#ifndef _DRIVER_MCPWM_H_
|
||
|
|
#define _DRIVER_MCPWM_H_
|
||
|
|
|
||
|
|
#include "esp_err.h"
|
||
|
|
#include "soc/soc.h"
|
||
|
|
#include "driver/gpio.h"
|
||
|
|
#include "driver/periph_ctrl.h"
|
||
|
|
#include "esp_intr.h"
|
||
|
|
#include "esp_intr_alloc.h"
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief IO signals for MCPWM
|
||
|
|
* 6 MCPWM output pins that generate PWM signals
|
||
|
|
* 3 MCPWM fault input pins to detect faults like overcurrent, overvoltage, etc
|
||
|
|
* 3 MCPWM sync input pins to synchronize MCPWM outputs signals
|
||
|
|
* 3 MCPWM capture input pin to capture hall sell signal to measure time
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM0A = 0, /*!<PWM0A output pin*/
|
||
|
|
MCPWM0B, /*!<PWM0B output pin*/
|
||
|
|
MCPWM1A, /*!<PWM1A output pin*/
|
||
|
|
MCPWM1B, /*!<PWM1B output pin*/
|
||
|
|
MCPWM2A, /*!<PWM2A output pin*/
|
||
|
|
MCPWM2B, /*!<PWM2B output pin*/
|
||
|
|
MCPWM_SYNC_0, /*!<SYNC0 input pin*/
|
||
|
|
MCPWM_SYNC_1, /*!<SYNC1 input pin*/
|
||
|
|
MCPWM_SYNC_2, /*!<SYNC2 input pin*/
|
||
|
|
MCPWM_FAULT_0, /*!<FAULT0 input pin*/
|
||
|
|
MCPWM_FAULT_1, /*!<FAULT1 input pin*/
|
||
|
|
MCPWM_FAULT_2, /*!<FAULT2 input pin*/
|
||
|
|
MCPWM_CAP_0 = 84, /*!<CAP0 input pin*/
|
||
|
|
MCPWM_CAP_1, /*!<CAP1 input pin*/
|
||
|
|
MCPWM_CAP_2, /*!<CAP2 input pin*/
|
||
|
|
} mcpwm_io_signals_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM pin number for
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
int mcpwm0a_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm0b_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm1a_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm1b_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm2a_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm2b_out_num; /*!<MCPWM0A out pin*/
|
||
|
|
int mcpwm_sync0_in_num; /*!<SYNC0 in pin*/
|
||
|
|
int mcpwm_sync1_in_num; /*!<SYNC1 in pin*/
|
||
|
|
int mcpwm_sync2_in_num; /*!<SYNC2 in pin*/
|
||
|
|
int mcpwm_fault0_in_num; /*!<FAULT0 in pin*/
|
||
|
|
int mcpwm_fault1_in_num; /*!<FAULT1 in pin*/
|
||
|
|
int mcpwm_fault2_in_num; /*!<FAULT2 in pin*/
|
||
|
|
int mcpwm_cap0_in_num; /*!<CAP0 in pin*/
|
||
|
|
int mcpwm_cap1_in_num; /*!<CAP1 in pin*/
|
||
|
|
int mcpwm_cap2_in_num; /*!<CAP2 in pin*/
|
||
|
|
} mcpwm_pin_config_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Select MCPWM unit
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_UNIT_0 = 0, /*!<MCPWM unit0 selected*/
|
||
|
|
MCPWM_UNIT_1, /*!<MCPWM unit1 selected*/
|
||
|
|
MCPWM_UNIT_MAX, /*!<Num of MCPWM units on ESP32*/
|
||
|
|
} mcpwm_unit_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Select MCPWM timer
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_TIMER_0 = 0, /*!<Select MCPWM timer0*/
|
||
|
|
MCPWM_TIMER_1, /*!<Select MCPWM timer1*/
|
||
|
|
MCPWM_TIMER_2, /*!<Select MCPWM timer2*/
|
||
|
|
MCPWM_TIMER_MAX, /*!<Num of MCPWM timers on ESP32*/
|
||
|
|
} mcpwm_timer_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Select MCPWM operator
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_OPR_A = 0, /*!<Select MCPWMXA, where 'X' is timer number*/
|
||
|
|
MCPWM_OPR_B, /*!<Select MCPWMXB, where 'X' is timer number*/
|
||
|
|
MCPWM_OPR_MAX, /*!<Num of operators to each timer of MCPWM*/
|
||
|
|
} mcpwm_operator_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Select type of MCPWM counter
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_UP_COUNTER = 1, /*!<For asymmetric MCPWM*/
|
||
|
|
MCPWM_DOWN_COUNTER, /*!<For asymmetric MCPWM*/
|
||
|
|
MCPWM_UP_DOWN_COUNTER, /*!<For symmetric MCPWM, frequency is half of MCPWM frequency set*/
|
||
|
|
MCPWM_COUNTER_MAX, /*!<Maximum counter mode*/
|
||
|
|
} mcpwm_counter_type_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Select type of MCPWM duty cycle mode
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_DUTY_MODE_0 = 0, /*!<Active high duty, i.e. duty cycle proportional to high time for asymmetric MCPWM*/
|
||
|
|
MCPWM_DUTY_MODE_1, /*!<Active low duty, i.e. duty cycle proportional to low time for asymmetric MCPWM, out of phase(inverted) MCPWM*/
|
||
|
|
MCPWM_DUTY_MODE_MAX, /*!<Num of duty cycle modes*/
|
||
|
|
} mcpwm_duty_type_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM carrier oneshot mode, in this mode the width of the first pulse of carrier can be programmed
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_ONESHOT_MODE_DIS = 0, /*!<Enable oneshot mode*/
|
||
|
|
MCPWM_ONESHOT_MODE_EN, /*!<Disable oneshot mode*/
|
||
|
|
} mcpwm_carrier_os_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM carrier output inversion, high frequency carrier signal active with MCPWM signal is high
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_CARRIER_OUT_IVT_DIS = 0, /*!<Enable carrier output inversion*/
|
||
|
|
MCPWM_CARRIER_OUT_IVT_EN, /*!<Disable carrier output inversion*/
|
||
|
|
} mcpwm_carrier_out_ivt_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select sync signal input
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_SELECT_SYNC0 = 4, /*!<Select SYNC0 as input*/
|
||
|
|
MCPWM_SELECT_SYNC1, /*!<Select SYNC1 as input*/
|
||
|
|
MCPWM_SELECT_SYNC2, /*!<Select SYNC2 as input*/
|
||
|
|
} mcpwm_sync_signal_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select fault signal input
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_SELECT_F0 = 0, /*!<Select F0 as input*/
|
||
|
|
MCPWM_SELECT_F1, /*!<Select F1 as input*/
|
||
|
|
MCPWM_SELECT_F2, /*!<Select F2 as input*/
|
||
|
|
} mcpwm_fault_signal_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select triggering level of fault signal
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_LOW_LEVEL_TGR = 0, /*!<Fault condition occurs when fault input signal goes from high to low, currently not supported*/
|
||
|
|
MCPWM_HIGH_LEVEL_TGR, /*!<Fault condition occurs when fault input signal goes low to high*/
|
||
|
|
} mcpwm_fault_input_level_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select action to be taken on MCPWMXA when fault occurs
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_NO_CHANGE_IN_MCPWMXA = 0, /*!<No change in MCPWMXA output*/
|
||
|
|
MCPWM_FORCE_MCPWMXA_LOW, /*!<Make MCPWMXA output low*/
|
||
|
|
MCPWM_FORCE_MCPWMXA_HIGH, /*!<Make MCPWMXA output high*/
|
||
|
|
MCPWM_TOG_MCPWMXA, /*!<Make MCPWMXA output toggle*/
|
||
|
|
} mcpwm_action_on_pwmxa_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select action to be taken on MCPWMxB when fault occurs
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_NO_CHANGE_IN_MCPWMXB = 0, /*!<No change in MCPWMXB output*/
|
||
|
|
MCPWM_FORCE_MCPWMXB_LOW, /*!<Make MCPWMXB output low*/
|
||
|
|
MCPWM_FORCE_MCPWMXB_HIGH, /*!<Make MCPWMXB output high*/
|
||
|
|
MCPWM_TOG_MCPWMXB, /*!<Make MCPWMXB output toggle*/
|
||
|
|
} mcpwm_action_on_pwmxb_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select capture signal input
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_SELECT_CAP0 = 0, /*!<Select CAP0 as input*/
|
||
|
|
MCPWM_SELECT_CAP1, /*!<Select CAP1 as input*/
|
||
|
|
MCPWM_SELECT_CAP2, /*!<Select CAP2 as input*/
|
||
|
|
} mcpwm_capture_signal_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM select capture starts from which edge
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_NEG_EDGE = 0, /*!<Capture starts from negative edge*/
|
||
|
|
MCPWM_POS_EDGE, /*!<Capture starts from positive edge*/
|
||
|
|
} mcpwm_capture_on_edge_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM deadtime types, used to generate deadtime, RED refers to rising edge delay and FED refers to falling edge delay
|
||
|
|
*/
|
||
|
|
typedef enum {
|
||
|
|
MCPWM_BYPASS_RED = 0, /*!<MCPWMXA = no change, MCPWMXB = falling edge delay*/
|
||
|
|
MCPWM_BYPASS_FED, /*!<MCPWMXA = rising edge delay, MCPWMXB = no change*/
|
||
|
|
MCPWM_ACTIVE_HIGH_MODE, /*!<MCPWMXA = rising edge delay, MCPWMXB = falling edge delay*/
|
||
|
|
MCPWM_ACTIVE_LOW_MODE, /*!<MCPWMXA = compliment of rising edge delay, MCPWMXB = compliment of falling edge delay*/
|
||
|
|
MCPWM_ACTIVE_HIGH_COMPLIMENT_MODE, /*!<MCPWMXA = rising edge delay, MCPWMXB = compliment of falling edge delay*/
|
||
|
|
MCPWM_ACTIVE_LOW_COMPLIMENT_MODE, /*!<MCPWMXA = compliment of rising edge delay, MCPWMXB = falling edge delay*/
|
||
|
|
MCPWM_ACTIVE_RED_FED_FROM_PWMXA, /*!<MCPWMXA = MCPWMXB = rising edge delay as well as falling edge delay, generated from MCPWMXA*/
|
||
|
|
MCPWM_ACTIVE_RED_FED_FROM_PWMXB, /*!<MCPWMXA = MCPWMXB = rising edge delay as well as falling edge delay, generated from MCPWMXB*/
|
||
|
|
MCPWM_DEADTIME_TYPE_MAX,
|
||
|
|
} mcpwm_deadtime_type_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM config structure
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
uint32_t frequency; /*!<Set frequency of MCPWM in Hz*/
|
||
|
|
float cmpr_a; /*!<Set % duty cycle for operator a(MCPWMXA), i.e for 62.3% duty cycle, duty_a = 62.3*/
|
||
|
|
float cmpr_b; /*!<Set % duty cycle for operator b(MCPWMXB), i.e for 48% duty cycle, duty_b = 48.0*/
|
||
|
|
mcpwm_duty_type_t duty_mode; /*!<Set type of duty cycle*/
|
||
|
|
mcpwm_counter_type_t counter_mode; /*!<Set type of MCPWM counter*/
|
||
|
|
} mcpwm_config_t;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief MCPWM config carrier structure
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
uint8_t carrier_period; /*!<Set carrier period = (carrier_period + 1)*800ns, carrier_period should be < 16*/
|
||
|
|
uint8_t carrier_duty; /*!<Set carrier duty cycle, carrier_duty should be less then 8(increment every 12.5%)*/
|
||
|
|
uint8_t pulse_width_in_os; /*!<Set pulse width of first pulse in one shot mode = (carrier period)*(pulse_width_in_os + 1), should be less then 16*/
|
||
|
|
mcpwm_carrier_os_t carrier_os_mode; /*!<Enable or disable carrier oneshot mode*/
|
||
|
|
mcpwm_carrier_out_ivt_t carrier_ivt_mode; /*!<Invert output of carrier*/
|
||
|
|
} mcpwm_carrier_config_t;
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This function initializes each gpio signal for MCPWM
|
||
|
|
* @note
|
||
|
|
* This function initializes one gpio at a time.
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM Channel(0-1)
|
||
|
|
* @param io_signal set MCPWM signals, each MCPWM unit has 6 output(MCPWMXA, MCPWMXB) and 9 input(SYNC_X, FAULT_X, CAP_X)
|
||
|
|
* 'X' is timer_num(0-2)
|
||
|
|
* @param gpio_num set this to configure gpio for MCPWM, if you want to use gpio16, gpio_num = 16
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_gpio_init(mcpwm_unit_t mcpwm_num, mcpwm_io_signals_t io_signal, int gpio_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize MCPWM gpio structure
|
||
|
|
* @note
|
||
|
|
* This function can be used to initialize more then one gpio at a time.
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM Channel(0-1)
|
||
|
|
* @param mcpwm_pin MCPWM pin structure
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_pin(mcpwm_unit_t mcpwm_num, const mcpwm_pin_config_t *mcpwm_pin);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize MCPWM parameters
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM Channel(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param mcpwm_conf configure structure mcpwm_config_t
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_init( mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, const mcpwm_config_t *mcpwm_conf);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set frequency(in Hz) of MCPWM timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param frequency set the frequency in Hz of each timer
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_frequency(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, uint32_t frequency);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set duty cycle of each operator(MCPWMXA/MCPWMXB)
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'X' is timer number selected
|
||
|
|
* @param duty set duty cycle in %(i.e for 62.3% duty cycle, duty = 62.3) of each operator
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_duty(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num, float duty);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set duty cycle of each operator(MCPWMXA/MCPWMXB) in us
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'x' is timer number selected
|
||
|
|
* @param duty set duty value in microseconds of each operator
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_duty_in_us(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num, uint32_t duty);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set duty either active high or active low(out of phase/inverted)
|
||
|
|
* @note
|
||
|
|
* Call this function every time after mcpwm_set_signal_high or mcpwm_set_signal_low to resume with previously set duty cycle
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'x' is timer number selected
|
||
|
|
* @param duty_num set active low or active high duty type
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_duty_type(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num, mcpwm_duty_type_t duty_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get frequency of timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - frequency of timer
|
||
|
|
*/
|
||
|
|
uint32_t mcpwm_get_frequency(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get duty cycle of each operator
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'x' is timer number selected
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - duty cycle in % of each operator(56.7 means duty is 56.7%)
|
||
|
|
*/
|
||
|
|
float mcpwm_get_duty(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Use this function to set MCPWM signal high
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'x' is timer number selected
|
||
|
|
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_signal_high(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Use this function to set MCPWM signal low
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param op_num set the operator(MCPWMXA/MCPWMXB), 'x' is timer number selected
|
||
|
|
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_set_signal_low(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_operator_t op_num);
|
||
|
|
/**
|
||
|
|
* @brief Start MCPWM signal on timer 'x'
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_start(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Start MCPWM signal on timer 'x'
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_stop(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize carrier configuration
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param carrier_conf configure structure mcpwm_carrier_config_t
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_init(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, const mcpwm_carrier_config_t *carrier_conf);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable MCPWM carrier submodule, for respective timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_enable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable MCPWM carrier submodule, for respective timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_disable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set period of carrier
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param carrier_period set the carrier period of each timer, carrier period = (carrier_period + 1)*800ns
|
||
|
|
* (carrier_period <= 15)
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_set_period(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, uint8_t carrier_period);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set duty_cycle of carrier
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param carrier_duty set duty_cycle of carrier , carrier duty cycle = carrier_duty*12.5%
|
||
|
|
* (chop_duty <= 7)
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_set_duty_cycle(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, uint8_t carrier_duty);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable and set width of first pulse in carrier oneshot mode
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param pulse_width set pulse width of first pulse in oneshot mode, width = (carrier period)*(pulse_width +1)
|
||
|
|
* (pulse_width <= 15)
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_oneshot_mode_enable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, uint8_t pulse_width);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable oneshot mode, width of first pulse = carrier period
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_oneshot_mode_disable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable or disable carrier output inversion
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param carrier_ivt_mode enable or disable carrier output inversion
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_carrier_output_invert(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num,
|
||
|
|
mcpwm_carrier_out_ivt_t carrier_ivt_mode);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable and initialize deadtime for each MCPWM timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param dt_mode set deadtime mode
|
||
|
|
* @param red set rising edge delay = red*100ns
|
||
|
|
* @param fed set rising edge delay = fed*100ns
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_deadtime_enable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_deadtime_type_t dt_mode,
|
||
|
|
uint32_t red, uint32_t fed);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable deadtime on MCPWM timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_deadtime_disable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize fault submodule, currently low level triggering not supported
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param intput_level set fault signal level, which will cause fault to occur
|
||
|
|
* @param fault_sig set the fault Pin, which needs to be enabled
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_fault_init(mcpwm_unit_t mcpwm_num, mcpwm_fault_input_level_t intput_level, mcpwm_fault_signal_t fault_sig);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set oneshot mode on fault detection, once fault occur in oneshot mode reset is required to resume MCPWM signals
|
||
|
|
* @note
|
||
|
|
* currently low level triggering not supported
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param fault_sig set the fault Pin, which needs to be enabled for oneshot mode
|
||
|
|
* @param action_on_pwmxa action to be taken on MCPWMXA when fault occurs, either no change or high or low or toggle
|
||
|
|
* @param action_on_pwmxb action to be taken on MCPWMXB when fault occurs, either no change or high or low or toggle
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_fault_set_oneshot_mode(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_fault_signal_t fault_sig,
|
||
|
|
mcpwm_action_on_pwmxa_t action_on_pwmxa, mcpwm_action_on_pwmxb_t action_on_pwmxb);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set cycle-by-cycle mode on fault detection, once fault occur in cyc mode MCPWM signal resumes as soon as fault signal becomes inactive
|
||
|
|
* @note
|
||
|
|
* currently low level triggering not supported
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param fault_sig set the fault Pin, which needs to be enabled for cyc mode
|
||
|
|
* @param action_on_pwmxa action to be taken on MCPWMXA when fault occurs, either no change or high or low or toggle
|
||
|
|
* @param action_on_pwmxb action to be taken on MCPWMXB when fault occurs, either no change or high or low or toggle
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_fault_set_cyc_mode(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_fault_signal_t fault_sig,
|
||
|
|
mcpwm_action_on_pwmxa_t action_on_pwmxa, mcpwm_action_on_pwmxb_t action_on_pwmxb);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable fault signal
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param fault_sig fault pin, which needs to be disabled
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_fault_deinit(mcpwm_unit_t mcpwm_num, mcpwm_fault_signal_t fault_sig);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize capture submodule
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param cap_edge set capture edge, BIT(0) - negative edge, BIT(1) - positive edge
|
||
|
|
* @param cap_sig capture Pin, which needs to be enabled
|
||
|
|
* @param num_of_pulse count time between rising/falling edge between 2 *(pulses mentioned), counter uses APB_CLK
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
|
||
|
|
esp_err_t mcpwm_capture_enable(mcpwm_unit_t mcpwm_num, mcpwm_capture_signal_t cap_sig, mcpwm_capture_on_edge_t cap_edge,
|
||
|
|
uint32_t num_of_pulse);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable capture signal
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param cap_sig capture Pin, which needs to be disabled
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_capture_disable(mcpwm_unit_t mcpwm_num, mcpwm_capture_signal_t cap_sig);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get capture value
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param cap_sig capture pin on which value is to be measured
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* Captured value
|
||
|
|
*/
|
||
|
|
uint32_t mcpwm_capture_signal_get_value(mcpwm_unit_t mcpwm_num, mcpwm_capture_signal_t cap_sig);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get edge of capture signal
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM Channel(0-1)
|
||
|
|
* @param cap_sig capture pin of whose edge is to be determined
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* Capture signal edge: 1 - positive edge, 2 - negtive edge
|
||
|
|
*/
|
||
|
|
uint32_t mcpwm_capture_signal_get_edge(mcpwm_unit_t mcpwm_num, mcpwm_capture_signal_t cap_sig);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize sync submodule
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
* @param sync_sig set the fault Pin, which needs to be enabled
|
||
|
|
* @param phase_val phase value in 1/1000(for 86.7%, phase_val = 867) which timer moves to on sync signal
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_sync_enable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num, mcpwm_sync_signal_t sync_sig,
|
||
|
|
uint32_t phase_val);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable sync submodule on given timer
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param timer_num set timer number(0-2) of MCPWM, each MCPWM unit has 3 timers
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_sync_disable(mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Register MCPWM interrupt handler, the handler is an ISR.
|
||
|
|
* the handler will be attached to the same CPU core that this function is running on.
|
||
|
|
*
|
||
|
|
* @param mcpwm_num set MCPWM unit(0-1)
|
||
|
|
* @param fn interrupt handler function.
|
||
|
|
* @param arg user-supplied argument passed to the handler function.
|
||
|
|
* @param intr_alloc_flags flags used to allocate the interrupt. One or multiple (ORred)
|
||
|
|
* ESP_INTR_FLAG_* values. see esp_intr_alloc.h for more info.
|
||
|
|
* @param arg parameter for handler function
|
||
|
|
* @param handle pointer to return handle. If non-NULL, a handle for the interrupt will
|
||
|
|
* be returned here.
|
||
|
|
*
|
||
|
|
* @return
|
||
|
|
* - ESP_OK Success
|
||
|
|
* - ESP_ERR_INVALID_ARG Function pointer error.
|
||
|
|
*/
|
||
|
|
esp_err_t mcpwm_isr_register(mcpwm_unit_t mcpwm_num, void (*fn)(void *), void *arg, int intr_alloc_flags, intr_handle_t *handle);
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /*_DRIVER_MCPWM_H_*/
|