OVMS3-idf/components/esp_rom/include/esp32s2/rom/opi_flash.h

/*
 * copyright (c) Espressif System 2019
 *
 */

#ifndef _ROM_OPI_FLASH_H_
#define _ROM_OPI_FLASH_H_
#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include "spi_flash.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef struct {
    uint16_t cmd;                /*!< Command value */
    uint16_t cmdBitLen;          /*!< Command byte length*/
    uint32_t *addr;              /*!< Point to address value*/
    uint32_t addrBitLen;         /*!< Address byte length*/
    uint32_t *txData;            /*!< Point to send data buffer*/
    uint32_t txDataBitLen;       /*!< Send data byte length.*/
    uint32_t *rxData;            /*!< Point to recevie data buffer*/
    uint32_t rxDataBitLen;       /*!< Recevie Data byte length.*/
    uint32_t dummyBitLen;
} esp_rom_spi_cmd_t;

#define ESP_ROM_OPIFLASH_MUX_TAKE()
#define ESP_ROM_OPIFLASH_MUX_GIVE()
#define ESP_ROM_OPIFLASH_SEL_CS0     (BIT(0))
#define ESP_ROM_OPIFLASH_SEL_CS1     (BIT(1))

// Definition of MX25UM25645G Octa Flash
// SPI status register
#define ESP_ROM_SPIFLASH_BUSY_FLAG     BIT0
#define ESP_ROM_SPIFLASH_WRENABLE_FLAG BIT1
#define ESP_ROM_SPIFLASH_BP0           BIT2
#define ESP_ROM_SPIFLASH_BP1           BIT3
#define ESP_ROM_SPIFLASH_BP2           BIT4
#define ESP_ROM_SPIFLASH_WR_PROTECT    (ESP_ROM_SPIFLASH_BP0|ESP_ROM_SPIFLASH_BP1|ESP_ROM_SPIFLASH_BP2)
#define ESP_ROM_SPIFLASH_QE            BIT9

#define FLASH_OP_MODE_RDCMD_DOUT       0x3B
#define ESP_ROM_FLASH_SECTOR_SIZE      0x1000
#define ESP_ROM_FLASH_BLOCK_SIZE_64K   0x10000
#define ESP_ROM_FLASH_PAGE_SIZE        256

// FLASH commands
#define ROM_FLASH_CMD_RDID             0x9F
#define ROM_FLASH_CMD_WRSR             0x01
#define ROM_FLASH_CMD_WRSR2            0x31 /* Not all SPI flash uses this command */
#define ROM_FLASH_CMD_WREN             0x06
#define ROM_FLASH_CMD_WRDI             0x04
#define ROM_FLASH_CMD_RDSR             0x05
#define ROM_FLASH_CMD_RDSR2            0x35 /* Not all SPI flash uses this command */
#define ROM_FLASH_CMD_ERASE_SEC        0x20
#define ROM_FLASH_CMD_ERASE_BLK_32K    0x52
#define ROM_FLASH_CMD_ERASE_BLK_64K    0xD8
#define ROM_FLASH_CMD_OTPEN            0x3A /* Enable OTP mode, not all SPI flash uses this command */
#define ROM_FLASH_CMD_RSTEN            0x66
#define ROM_FLASH_CMD_RST              0x99

#define ROM_FLASH_CMD_SE4B             0x21
#define ROM_FLASH_CMD_SE4B_OCT         0xDE21
#define ROM_FLASH_CMD_BE4B             0xDC
#define ROM_FLASH_CMD_BE4B_OCT         0x23DC
#define ROM_FLASH_CMD_RSTEN_OCT        0x9966
#define ROM_FLASH_CMD_RST_OCT          0x6699

#define ROM_FLASH_CMD_FSTRD4B_STR      0x13EC
#define ROM_FLASH_CMD_FSTRD4B_DTR      0x11EE
#define ROM_FLASH_CMD_FSTRD4B          0x0C
#define ROM_FLASH_CMD_PP4B             0x12
#define ROM_FLASH_CMD_PP4B_OCT         0xED12

#define ROM_FLASH_CMD_RDID_OCT         0x609F
#define ROM_FLASH_CMD_WREN_OCT         0xF906
#define ROM_FLASH_CMD_RDSR_OCT         0xFA05
#define ROM_FLASH_CMD_RDCR2            0x71
#define ROM_FLASH_CMD_RDCR2_OCT        0x8E71
#define ROM_FLASH_CMD_WRCR2            0x72
#define ROM_FLASH_CMD_WRCR2_OCT        0x8D72

// Definitions for GigaDevice GD25LX256E Flash
#define ROM_FLASH_CMD_RDFSR_GD            0x70
#define ROM_FLASH_CMD_RD_GD               0x03
#define ROM_FLASH_CMD_RD4B_GD             0x13
#define ROM_FLASH_CMD_FSTRD_GD            0x0B
#define ROM_FLASH_CMD_FSTRD4B_GD          0x0C
#define ROM_FLASH_CMD_FSTRD_OOUT_GD       0x8B
#define ROM_FLASH_CMD_FSTRD4B_OOUT_GD     0x7C
#define ROM_FLASH_CMD_FSTRD_OIOSTR_GD     0xCB
#define ROM_FLASH_CMD_FSTRD4B_OIOSTR_GD   0xCC
#define ROM_FLASH_CMD_FSTRD4B_OIODTR_GD   0xFD

#define ROM_FLASH_CMD_PP_GD               0x02
#define ROM_FLASH_CMD_PP4B_GD             0x12
#define ROM_FLASH_CMD_PP_OOUT_GD          0x82
#define ROM_FLASH_CMD_PP4B_OOUT_GD        0x84
#define ROM_FLASH_CMD_PP_OIO_GD           0xC2
#define ROM_FLASH_CMD_PP4B_OIOSTR_GD      0x8E

#define ROM_FLASH_CMD_SE_GD               0x20
#define ROM_FLASH_CMD_SE4B_GD             0x21
#define ROM_FLASH_CMD_BE32K_GD            0x52
#define ROM_FLASH_CMD_BE32K4B_GD          0x5C
#define ROM_FLASH_CMD_BE64K_GD            0xD8
#define ROM_FLASH_CMD_BE64K4B_GD          0xDC

#define ROM_FLASH_CMD_EN4B_GD             0xB7
#define ROM_FLASH_CMD_DIS4B_GD            0xE9

// spi user mode command config

/**
 * @brief Config the spi user command
 * @param spi_num spi port
 * @param pcmd pointer to accept the spi command struct
 */
void esp_rom_spi_cmd_config(int spi_num, esp_rom_spi_cmd_t* pcmd);

/**
 * @brief Start a spi user command sequence
 * @param spi_num spi port
 * @param rx_buf buffer pointer to receive data
 * @param rx_len receive data length in byte
 * @param cs_en_mask decide which cs to use, 0 for cs0, 1 for cs1
 * @param is_write_erase to indicate whether this is a write or erase operation, since the CPU would check permission
 */
void esp_rom_spi_cmd_start(int spi_num, uint8_t* rx_buf, uint16_t rx_len, uint8_t cs_en_mask, bool is_write_erase);

/**
 * @brief Config opi flash pads according to efuse settings.
 */
void esp_rom_opiflash_pin_config(void);

// set SPI read/write mode
/**
 * @brief Set SPI operation mode
 * @param spi_num spi port
 * @param mode Flash Read Mode
 */
void esp_rom_spi_set_op_mode(int spi_num, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief Set data swap mode in DTR(DDR) mode
 * @param spi_num spi port
 * @param wr_swap to decide whether to swap fifo data in dtr write operation
 * @param rd_swap to decide whether to swap fifo data in dtr read operation
 */
void esp_rom_spi_set_dtr_swap_mode(int spi, bool wr_swap, bool rd_swap);


/**
 * @brief to send reset command in spi/opi-str/opi-dtr mode(for MX25UM25645G)
 * @param spi_num spi port
 */
void esp_rom_opiflash_mode_reset(int spi_num);

#if 0
// MX25UM25645G opi flash interface
/**
 * @brief To execute a flash operation command
 * @param spi_num spi port
 * @param mode Flash Read Mode
 * @param cmd data to send in command field
 * @param cmd_bit_len bit length of command field
 * @param addr data to send in address field
 * @param addr_bit_len bit length of address field
 * @param dummy_bits bit length of dummy field
 * @param mosi_data data buffer to be sent in mosi field
 * @param mosi_bit_len bit length of data buffer to be sent in mosi field
 * @param miso_data data buffer to accept data in miso field
 * @param miso_bit_len bit length of data buffer to accept data in miso field
 * @param cs_mark decide which cs pin to use. 0: cs0, 1: cs1
 * @param is_write_erase_operation to indicate whether this a write or erase flash operation
 */
void esp_rom_opiflash_exec_cmd(int spi_num, esp_rom_spiflash_read_mode_t mode,
                                  uint32_t cmd, int cmd_bit_len,
                                  uint32_t addr, int addr_bit_len,
                                  int dummy_bits,
                                  uint8_t* mosi_data, int mosi_bit_len,
                                  uint8_t* miso_data, int miso_bit_len,
                                  uint32_t cs_mask,
                                  bool is_write_erase_operation);

/**
 * @brief send reset command to opi flash
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 */
void esp_rom_opiflash_soft_reset(int spi_num, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to read opi flash ID(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 * @return opi flash id
 */
uint32_t esp_rom_opiflash_read_id(int spi_num, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to read opi flash status register(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 * @return opi flash status value
 */
uint8_t esp_rom_opiflash_rdsr(int spi_num, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief wait opi flash status register to be idle
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 */
void esp_rom_opiflash_wait_idle(int spi_num, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to read the config register2(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 * @param addr the address of configure register
 * @return value of config register2
 */
uint8_t esp_rom_opiflash_rdcr2(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t addr);

/**
 * @brief to write the config register2(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode Flash Operation Mode
 * @param addr the address of config register
 * @param val the value to write
 */
void esp_rom_opiflash_wrcr2(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t addr, uint8_t val);

/**
 * @brief to erase flash sector(for MX25UM25645G)
 * @param spi_num spi port
 * @param address the sector address to be erased
 * @param mode Flash operation mode
 * @return flash operation result
 */
esp_rom_spiflash_result_t esp_rom_opiflash_erase_sector(int spi_num, uint32_t address, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to erase flash block(for MX25UM25645G)
 * @param spi_num spi port
 * @param address the block address to be erased
 * @param mode Flash operation mode
 * @return flash operation result
 */
esp_rom_spiflash_result_t esp_rom_opiflash_erase_block_64k(int spi_num, uint32_t address, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to erase a flash area define by start address and length(for MX25UM25645G)
 * @param spi_num spi port
 * @param start_addr the start address to be erased
 * @param area_len the erea length to be erased
 * @param mode flash operation mode
 * @return flash operation result
 */
esp_rom_spiflash_result_t esp_rom_opiflash_erase_area(int spi_num, uint32_t start_addr, uint32_t area_len, esp_rom_spiflash_read_mode_t mode);

/**
 * @brief to read data from opi flash(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode flash operation mode
 * @param flash_addr flash address to read data from
 * @param data_addr data buffer to accept the data
 * @param len data length to be read
 * @return flash operation result
 */
esp_rom_spiflash_result_t esp_rom_opiflash_read(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t flash_addr, uint8_t *data_addr, int len);

/**
 * @brief to write data to opi flash(for MX25UM25645G)
 * @param spi_num spi port
 * @param mode flash operation mode
 * @param flash_addr flash address to write data to
 * @param data_addr data buffer to write to flash
 * @param len data length to write
 * @return flash operation result
 */
esp_rom_spiflash_result_t esp_rom_opiflash_write(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t flash_addr, uint8_t *data_addr, uint32_t len);

/**
 * @brief to set opi flash operation mode(for MX25UM25645G)
 * @param spi_num spi port
 * @param cur_mode current operation mode
 * @param target the target operation mode to be set
 */
void esp_rom_opiflash_set_mode(int spi_num, esp_rom_spiflash_read_mode_t cur_mode, esp_rom_spiflash_read_mode_t target_mode);
#endif

#ifdef __cplusplus
}
#endif

#endif