OVMS3-idf/examples/bluetooth/ble_mesh/ble_mesh_node/README.md

17 lines
1.2 KiB
Markdown
Raw Normal View History

component/ble_mesh: ESP BLE Mesh release 1. BLE Mesh Core * Provisioning: Node Role * Advertising and GATT bearer * Authentication OOB * Provisioning: Provisioner Role * Advertising and GATT bearer * Authentication OOB * Networking * Relay * Segmentation and Reassembly * Key Refresh * IV Update * Proxy Support * Multiple Client Models Run Simultaneously * Support multiple client models send packets to different nodes simultaneously * No blocking between client model and server * NVS Storage * Store Provisioning Data of BLE Mesh Nodes in Flash 2. BLE Mesh Applications * BLE Mesh Node & Provisioner * Node Example * Provisioner Example * Node + Generic OnOff Client Example * Fast Provisioning * Vendor Fast Prov Server Model * Vendor Fast Prov Client Model * Examples * Wi-Fi & BLE Mesh Coexistence * Example * BLE Mesh Console Commands * Example 3. BLE Mesh Models * Foundation Models * Configuration Server Model * Configuration Client Model * Health Server Model * Health Client Model * Generic Client Models * Generic OnOff Client * Generic Level Client * Generic Location Client * Generic Default Transition Timer Client * Generic Power OnOff Client * Generic Power Level Client * Generic Battery Client * Generic Property Client * Generic Server Models * Generic OnOff Server (Example) * Lighting Client Models * Light Lightness Client * Light CTL Client * Light HSL Client * Light xyL Client * Light LC Client * Sensor Client Model * Sensor Client * Time and Scenes Client Models * Time Client * Scene Client * Scheduler Client
2019-01-07 07:16:47 +00:00
ESP BLE Mesh Node demo
==========================
This demo shows how BLE Mesh device can be set up as a node with the following features:
- One element
- Two SIG models
- **Configuration Server model**: The role of this model is mainly to configure Provisioner devices AppKey and set up its relay function, TTL size, subscription, etc.
- **OnOff Server model**: This model implements the most basic function of turning the lights on and off.
The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: `make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...`
For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO\_NUM\_25, GPIO\_NUM\_26, GPIO\_NUM\_27. Then you need to select the following option in menuconfig:
`make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32`
Please check the [tutorial](tutorial/Ble_Mesh_Node_Example_Walkthrough.md) for more information about this example.