Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/mbedtls/Kconfig

514 lines
15 KiB
Text
Raw Normal View History

mbedtls: Add some initial menuconfig options
2016-09-21 06:36:30 +00:00
menu "mbedTLS"
config MBEDTLS_SSL_MAX_CONTENT_LEN
int "TLS maximum message content length"
Kconfig: use 4 spaces to instead 1 tab In some Kconfig file, both 4 spaces and 1 tab are used mix, let's just use 4 space, it will be clean in some editor.
2016-09-28 05:24:58 +00:00
default 16384
mbedtls: Add some initial menuconfig options
2016-09-21 06:36:30 +00:00
range 512 16384
help
Maximum TLS message length (in bytes) supported by mbedTLS.
16384 is the default and this value is required to comply
fully with TLS standards.
However you can set a lower value in order to save RAM. This
is safe if the other end of the connection supports Maximum
Fragment Length Negotiation Extension (max_fragment_length,
see RFC6066) or you know for certain that it will never send a
message longer than a certain number of bytes.
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
mbedtls: Add some initial menuconfig options
2016-09-21 06:36:30 +00:00
If the value is set too low, symptoms are a failed TLS
handshake or a return value of MBEDTLS_ERR_SSL_INVALID_RECORD
(-0x7200).
config MBEDTLS_DEBUG
bool "Enable mbedTLS debugging"
mbedtls hardware RSA: Put into menuconfig, squash warnings All combinations of enabling/disabling hardware acceleration no longer show unused warnings.
2016-11-18 03:26:02 +00:00
default n
mbedtls: Add some initial menuconfig options
2016-09-21 06:36:30 +00:00
help
mbedTLS: Add generic support for mbedTLS debug output via the esp_log functionality
2016-11-26 00:58:50 +00:00
Enable mbedTLS debugging functions at compile time.
If this option is enabled, you can include
"mbedtls/esp_debug.h" and call mbedtls_esp_enable_debug_log()
at runtime in order to enable mbedTLS debug output via the ESP
log mechanism.
mbedtls: Add some initial menuconfig options
2016-09-21 06:36:30 +00:00
mbedtls: Temporarily disable hardware acceleration in dual-core mode Temporary fix, until DPORT bugs in crypto accelerators are completely fixed.
2017-07-05 04:03:00 +00:00
config MBEDTLS_UNSAFE_ACCELERATION
bool "Allow buggy hardware acceleration features"
depends on !FREERTOS_UNICORE
default n
help
A bug currently prevents dual cores & crypto hardware acceleration from being used together.
Enable this option to allow hardware acceleration anyhow (note that invalid results or crashes may occur.)
mbedtls hardware RSA: Put into menuconfig, squash warnings All combinations of enabling/disabling hardware acceleration no longer show unused warnings.
2016-11-18 03:26:02 +00:00
config MBEDTLS_HARDWARE_AES
bool "Enable hardware AES acceleration"
mbedtls: Temporarily disable hardware acceleration in dual-core mode Temporary fix, until DPORT bugs in crypto accelerators are completely fixed.
2017-07-05 04:03:00 +00:00
depends on MBEDTLS_UNSAFE_ACCELERATION || FREERTOS_UNICORE
mbedtls hardware RSA: Put into menuconfig, squash warnings All combinations of enabling/disabling hardware acceleration no longer show unused warnings.
2016-11-18 03:26:02 +00:00
default y
help
Enable hardware accelerated AES encryption & decryption.
config MBEDTLS_HARDWARE_MPI
bool "Enable hardware MPI (bignum) acceleration"
mbedtls: Temporarily disable hardware acceleration in dual-core mode Temporary fix, until DPORT bugs in crypto accelerators are completely fixed.
2017-07-05 04:03:00 +00:00
depends on MBEDTLS_UNSAFE_ACCELERATION || FREERTOS_UNICORE
mbedtls hardware RSA: Put into menuconfig, squash warnings All combinations of enabling/disabling hardware acceleration no longer show unused warnings.
2016-11-18 03:26:02 +00:00
default y
help
Enable hardware accelerated multiple precision integer operations.
Hardware accelerated multiplication, modulo multiplication,
and modular exponentiation for up to 4096 bit results.
These operations are used by RSA.
mbedtls hardware bignum: Support "RSA" interrupt for end of operation Allows CPU to do other things which bignum operation is in progress.
2016-11-18 04:53:00 +00:00
config MBEDTLS_MPI_USE_INTERRUPT
bool "Use interrupt for MPI operations"
depends on MBEDTLS_HARDWARE_MPI
default y
help
Use an interrupt to coordinate MPI operations.
This allows other code to run on the CPU while an MPI operation is pending.
Otherwise the CPU busy-waits.
mbedtls hardware RSA: Put into menuconfig, squash warnings All combinations of enabling/disabling hardware acceleration no longer show unused warnings.
2016-11-18 03:26:02 +00:00
mbedTLS SHA acceleration: Allow concurrent digest calculation, works with TLS SHA hardware allows each of SHA1, SHA256, SHA384&SHA512 to calculate digests concurrently. Currently incompatible with AES acceleration due to a hardware reset problem. Ref TW7111.
2016-11-20 05:29:29 +00:00
config MBEDTLS_HARDWARE_SHA
bool "Enable hardware SHA acceleration"
mbedtls: Temporarily disable hardware acceleration in dual-core mode Temporary fix, until DPORT bugs in crypto accelerators are completely fixed.
2017-07-05 04:03:00 +00:00
depends on MBEDTLS_UNSAFE_ACCELERATION || FREERTOS_UNICORE
mbedTLS SHA acceleration: Allow concurrent digest calculation, works with TLS SHA hardware allows each of SHA1, SHA256, SHA384&SHA512 to calculate digests concurrently. Currently incompatible with AES acceleration due to a hardware reset problem. Ref TW7111.
2016-11-20 05:29:29 +00:00
default y
help
Enable hardware accelerated SHA1, SHA256, SHA384 & SHA512 in mbedTLS.
Due to a hardware limitation, hardware acceleration is only
guaranteed if SHA digests are calculated one at a time. If more
than one SHA digest is calculated at the same time, only will
be calculated fully in hardware and the rest will be calculated
(at least partially calculated) in software.
components/mbedtls: add time and time data configuration at menuconfig
2016-12-01 08:25:44 +00:00
config MBEDTLS_HAVE_TIME
bool "Enable mbedtls time"
depends on !ESP32_TIME_SYSCALL_USE_NONE
default y
help
System has time.h and time().
The time does not need to be correct, only time differences are used,
config MBEDTLS_HAVE_TIME_DATE
bool "Enable mbedtls time data"
depends on MBEDTLS_HAVE_TIME
default n
help
System has time.h and time(), gmtime() and the clock is correct.
The time needs to be correct (not necesarily very accurate, but at least
the date should be correct). This is used to verify the validity period of
X.509 certificates.
It is suggested that you should get the real time by "SNTP".
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
choice MBEDTLS_TLS_MODE
bool "TLS Protocol Role"
default MBEDTLS_TLS_SERVER_AND_CLIENT
help
mbedTLS can be compiled with protocol support for the TLS
server, TLS client, or both server and client.
Reducing the number of TLS roles supported saves code size.
config MBEDTLS_TLS_SERVER_AND_CLIENT
bool "Server & Client"
select MBEDTLS_TLS_SERVER
select MBEDTLS_TLS_CLIENT
config MBEDTLS_TLS_SERVER_ONLY
bool "Server"
select MBEDTLS_TLS_SERVER
config MBEDTLS_TLS_CLIENT_ONLY
bool "Client"
select MBEDTLS_TLS_CLIENT
config MBEDTLS_TLS_DISABLED
bool "None"
endchoice
config MBEDTLS_TLS_SERVER
bool
select MBEDTLS_TLS_ENABLED
config MBEDTLS_TLS_CLIENT
bool
select MBEDTLS_TLS_ENABLED
config MBEDTLS_TLS_ENABLED
bool
menu "TLS Key Exchange Methods"
depends on MBEDTLS_TLS_ENABLED
config MBEDTLS_PSK_MODES
bool "Enable pre-shared-key ciphersuites"
default n
help
Enable to show configuration for different types of pre-shared-key TLS authentatication methods.
Leaving this options disabled will save code size if they are not used.
config MBEDTLS_KEY_EXCHANGE_PSK
bool "Enable PSK based ciphersuite modes"
depends on MBEDTLS_PSK_MODES
default n
help
Enable to support symmetric key PSK (pre-shared-key) TLS key exchange modes.
config MBEDTLS_KEY_EXCHANGE_DHE_PSK
bool "Enable DHE-PSK based ciphersuite modes"
depends on MBEDTLS_PSK_MODES
default y
help
Enable to support Diffie-Hellman PSK (pre-shared-key) TLS authentication modes.
config MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
bool "Enable ECDHE-PSK based ciphersuite modes"
depends on MBEDTLS_PSK_MODES
default y
help
Enable to support Elliptic-Curve-Diffie-Hellman PSK (pre-shared-key) TLS authentication modes.
config MBEDTLS_KEY_EXCHANGE_RSA_PSK
bool "Enable RSA-PSK based ciphersuite modes"
depends on MBEDTLS_PSK_MODES
default y
help
Enable to support RSA PSK (pre-shared-key) TLS authentication modes.
config MBEDTLS_KEY_EXCHANGE_RSA
bool "Enable RSA-only based ciphersuite modes"
default y
help
Enable to support ciphersuites with prefix TLS-RSA-WITH-
config MBEDTLS_KEY_EXCHANGE_DHE_RSA
bool "Enable DHE-RSA based ciphersuite modes"
default y
help
Enable to support ciphersuites with prefix TLS-DHE-RSA-WITH-
config MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
bool "Support Elliptic Curve based ciphersuites"
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
depends on MBEDTLS_ECP_C
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
default y
help
Enable to show Elliptic Curve based ciphersuite mode options.
Disabling all Elliptic Curve ciphersuites saves code size and
can give slightly faster TLS handshakes, provided the server supports
RSA-only ciphersuite modes.
config MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
bool "Enable ECDHE-RSA based ciphersuite modes"
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
depends on MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE && MBEDTLS_ECDH_C
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
default y
help
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
config MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
bool "Enable ECDHE-ECDSA based ciphersuite modes"
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
depends on MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE && MBEDTLS_ECDH_C && MBEDTLS_ECDSA_C
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
default y
help
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
config MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
bool "Enable ECDH-ECDSA based ciphersuite modes"
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
depends on MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE && MBEDTLS_ECDH_C && MBEDTLS_ECDSA_C
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
default y
help
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
config MBEDTLS_KEY_EXCHANGE_ECDH_RSA
bool "Enable ECDH-RSA based ciphersuite modes"
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
depends on MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE && MBEDTLS_ECDH_C
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
default y
help
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
endmenu # TLS key exchange modes
config MBEDTLS_SSL_RENEGOTIATION
bool "Support TLS renegotiation"
depends on MBEDTLS_TLS_ENABLED
default y
help
The two main uses of renegotiation are (1) refresh keys on long-lived
connections and (2) client authentication after the initial handshake.
If you don't need renegotiation, disabling it will save code size and
reduce the possibility of abuse/vulnerability.
config MBEDTLS_SSL_PROTO_SSL3
bool "Legacy SSL 3.0 support"
depends on MBEDTLS_TLS_ENABLED
default n
help
Support the legacy SSL 3.0 protocol. Most servers will speak a newer
TLS protocol these days.
config MBEDTLS_SSL_PROTO_TLS1
bool "Support TLS 1.0 protocol"
depends on MBEDTLS_TLS_ENABLED
default y
config MBEDTLS_SSL_PROTO_TLS1_1
bool "Support TLS 1.1 protocol"
depends on MBEDTLS_TLS_ENABLED
default y
config MBEDTLS_SSL_PROTO_TLS1_2
bool "Support TLS 1.2 protocol"
depends on MBEDTLS_TLS_ENABLED
default y
config MBEDTLS_SSL_PROTO_DTLS
bool "Support DTLS protocol (all versions)"
default n
depends on MBEDTLS_SSL_PROTO_TLS1_1 || MBEDTLS_SSL_PROTO_TLS1_2
help
Requires TLS 1.1 to be enabled for DTLS 1.0
Requires TLS 1.2 to be enabled for DTLS 1.2
config MBEDTLS_SSL_ALPN
bool "Support ALPN (Application Layer Protocol Negotiation)"
depends on MBEDTLS_TLS_ENABLED
default y
help
Disabling this option will save some code size if it is not needed.
config MBEDTLS_SSL_SESSION_TICKETS
bool "TLS: Support RFC 5077 SSL session tickets"
default y
depends on MBEDTLS_TLS_ENABLED
help
Support RFC 5077 session tickets. See mbedTLS documentation for more details.
Disabling this option will save some code size.
menu "Symmetric Ciphers"
config MBEDTLS_AES_C
bool "AES block cipher"
default y
config MBEDTLS_CAMELLIA_C
bool "Camellia block cipher"
default n
config MBEDTLS_DES_C
bool "DES block cipher (legacy, insecure)"
default n
help
Enables the DES block cipher to support 3DES-based TLS ciphersuites.
3DES is vulnerable to the Sweet32 attack and should only be enabled
if absolutely necessary.
choice MBEDTLS_RC4_MODE
prompt "RC4 Stream Cipher (legacy, insecure)"
default MBEDTLS_RC4_DISABLED
help
ARCFOUR (RC4) stream cipher can be disabled entirely, enabled but not
added to default ciphersuites, or enabled completely.
Please consider the security implications before enabling RC4.
config MBEDTLS_RC4_DISABLED
bool "Disabled"
config MBEDTLS_RC4_ENABLED_NO_DEFAULT
bool "Enabled, not in default ciphersuites"
config MBEDTLS_RC4_ENABLED
bool "Enabled"
endchoice
config MBEDTLS_BLOWFISH_C
bool "Blowfish block cipher (read help)"
default n
help
Enables the Blowfish block cipher (not used for TLS sessions.)
The Blowfish cipher is not used for mbedTLS TLS sessions but can be
used for other purposes. Read up on the limitations of Blowfish (including
Sweet32) before enabling.
config MBEDTLS_XTEA_C
bool "XTEA block cipher"
default n
help
Enables the XTEA block cipher.
config MBEDTLS_CCM_C
bool "CCM (Counter with CBC-MAC) block cipher modes"
default y
depends on MBEDTLS_AES_C || MBEDTLS_CAMELLIA_C
help
Enable Counter with CBC-MAC (CCM) modes for AES and/or Camellia ciphers.
Disabling this option saves some code size.
config MBEDTLS_GCM_C
bool "GCM (Galois/Counter) block cipher modes"
default y
depends on MBEDTLS_AES_C || MBEDTLS_CAMELLIA_C
help
Enable Galois/Counter Mode for AES and/or Camellia ciphers.
This option is generally faster than CCM.
endmenu # Symmetric Ciphers
config MBEDTLS_RIPEMD160_C
bool "Enable RIPEMD-160 hash algorithm"
default n
help
Enable the RIPEMD-160 hash algorithm.
menu "Certificates"
config MBEDTLS_PEM_PARSE_C
bool "Read & Parse PEM formatted certificates"
default y
help
Enable decoding/parsing of PEM formatted certificates.
If your certificates are all in the simpler DER format, disabling
this option will save some code size.
config MBEDTLS_PEM_WRITE_C
bool "Write PEM formatted certificates"
default y
help
Enable writing of PEM formatted certificates.
If writing certificate data only in DER format, disabling this
option will save some code size.
config MBEDTLS_X509_CRL_PARSE_C
bool "X.509 CRL parsing"
default y
help
Support for parsing X.509 Certifificate Revocation Lists.
config MBEDTLS_X509_CSR_PARSE_C
bool "X.509 CSR parsing"
default y
help
Support for parsing X.509 Certifificate Signing Requests
endmenu # Certificates
mbedtls: Add more config options to disable Elliptic Curve features Can save up to an additional 20KB when not using EC in TLS, or disable unwanted features as needed.
2017-08-18 07:44:33 +00:00
menuconfig MBEDTLS_ECP_C
bool "Elliptic Curve Ciphers"
default y
config MBEDTLS_ECDH_C
bool "Elliptic Curve Diffie-Hellman (ECDH)"
depends on MBEDTLS_ECP_C
default y
help
Enable ECDH. Needed to use ECDHE-xxx TLS ciphersuites.
config MBEDTLS_ECDSA_C
bool "Elliptic Curve DSA"
depends on MBEDTLS_ECDH_C
default y
help
Enable ECDSA. Needed to use ECDSA-xxx TLS ciphersuites.
config MBEDTLS_ECP_DP_SECP192R1_ENABLED
bool "Enable SECP192R1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP192R1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP224R1_ENABLED
bool "Enable SECP224R1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP224R1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP256R1_ENABLED
bool "Enable SECP256R1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP256R1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP384R1_ENABLED
bool "Enable SECP384R1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP384R1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP521R1_ENABLED
bool "Enable SECP521R1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP521R1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP192K1_ENABLED
bool "Enable SECP192K1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP192K1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP224K1_ENABLED
bool "Enable SECP224K1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP224K1 Elliptic Curve.
config MBEDTLS_ECP_DP_SECP256K1_ENABLED
bool "Enable SECP256K1 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for SECP256K1 Elliptic Curve.
config MBEDTLS_ECP_DP_BP256R1_ENABLED
bool "Enable BP256R1 curve"
depends on MBEDTLS_ECP_C
default y
help
support for DP Elliptic Curve.
config MBEDTLS_ECP_DP_BP384R1_ENABLED
bool "Enable BP384R1 curve"
depends on MBEDTLS_ECP_C
default y
help
support for DP Elliptic Curve.
config MBEDTLS_ECP_DP_BP512R1_ENABLED
bool "Enable BP512R1 curve"
depends on MBEDTLS_ECP_C
default y
help
support for DP Elliptic Curve.
config MBEDTLS_ECP_DP_CURVE25519_ENABLED
bool "Enable CURVE25519 curve"
depends on MBEDTLS_ECP_C
default y
help
Enable support for CURVE25519 Elliptic Curve.
config MBEDTLS_ECP_NIST_OPTIM
bool "NIST 'modulo p' optimisations"
depends on MBEDTLS_ECP_C
default y
help
NIST 'modulo p' optimisations increase Elliptic Curve operation performance.
Disabling this option saves some code size.
# end of Elliptic Curve options
mbedtls: Expose compile-time config, disable some things by default * Disables 3DES, Camellia, Blowfish, RC4, RIPEMD160, SSLv3, TLS-PSK modes, DTLS by default * Saves about 40KB from the default TLS client code size * Defaults no longer get "Bad" howsmyssl.com rating (no more vulnerable 3DES) (ping https://github.com/espressif/arduino-esp32/issues/575 ) * Allows up to another 20-30KB code size to be trimmed without security implications if using DER formatted certificates, RSA ciphersuites only, etc. * Can save up to another 8KB by setting the TLS Role to Server or Client only.
2017-08-17 07:15:04 +00:00
endmenu # mbedTLS
Reference in a new issue Copy permalink