Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/freemodbus/modbus/include/mbframe.h

96 lines
4 KiB
C
Raw Normal View History

examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_FRAME_H
#define _MB_FRAME_H
freemodbus: fix long buffer failure check master read write functions with array of registers) fix master serial processing code and modbus controller to work with register array modbus_master: add reading and writing of test value array (58 registers) to check failure is gone remove parameter temporary buffer from modbus controller to allow more than 24 byte writes driver: fix issue with TOUT feature driver: fix uart_rx_timeout issue driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly examples: update examples to use tout feature driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c driver: change conditions to trigger workaround for tout feature in uart.c driver: change uart_set_always_rx_timeout() freemodbus: fix tabs, remove commented code driver: remove uart_ll_is_rx_idle()
2020-03-30 14:05:48 +00:00
#include "port.h"
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/*!
* Constants which defines the format of a modbus frame. The example is
* shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not
* dependent on the underlying transport.
*
* <code>
* <------------------------ MODBUS SERIAL LINE PDU (1) ------------------->
* <----------- MODBUS PDU (1') ---------------->
* +-----------+---------------+----------------------------+-------------+
* | Address | Function Code | Data | CRC/LRC |
* +-----------+---------------+----------------------------+-------------+
* | | | |
* (2) (3/2') (3') (4)
*
* (1) ... MB_SER_PDU_SIZE_MAX = 256
* (2) ... MB_SER_PDU_ADDR_OFF = 0
* (3) ... MB_SER_PDU_PDU_OFF = 1
* (4) ... MB_SER_PDU_SIZE_CRC = 2
*
* (1') ... MB_PDU_SIZE_MAX = 253
* (2') ... MB_PDU_FUNC_OFF = 0
* (3') ... MB_PDU_DATA_OFF = 1
* </code>
*/
/* ----------------------- Defines ------------------------------------------*/
freemodbus: fix long buffer failure check master read write functions with array of registers) fix master serial processing code and modbus controller to work with register array modbus_master: add reading and writing of test value array (58 registers) to check failure is gone remove parameter temporary buffer from modbus controller to allow more than 24 byte writes driver: fix issue with TOUT feature driver: fix uart_rx_timeout issue driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly examples: update examples to use tout feature driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c driver: change conditions to trigger workaround for tout feature in uart.c driver: change uart_set_always_rx_timeout() freemodbus: fix tabs, remove commented code driver: remove uart_ll_is_rx_idle()
2020-03-30 14:05:48 +00:00
#define MB_PDU_SIZE_MAX ( 253 ) /*!< Maximum size of a PDU. */
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
#define MB_PDU_SIZE_MIN 1 /*!< Function Code */
#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */
#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */
freemodbus: fix long buffer failure check master read write functions with array of registers) fix master serial processing code and modbus controller to work with register array modbus_master: add reading and writing of test value array (58 registers) to check failure is gone remove parameter temporary buffer from modbus controller to allow more than 24 byte writes driver: fix issue with TOUT feature driver: fix uart_rx_timeout issue driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly examples: update examples to use tout feature driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c driver: change conditions to trigger workaround for tout feature in uart.c driver: change uart_set_always_rx_timeout() freemodbus: fix tabs, remove commented code driver: remove uart_ll_is_rx_idle()
2020-03-30 14:05:48 +00:00
#define MB_SER_PDU_SIZE_MAX ( MB_SERIAL_BUF_SIZE ) /*!< Maximum size of a Modbus frame. */
freemodbus: add modbus master ascii add support of modbus master ascii rename base dir name of master and slave example to be mb_slave, mb_master to avoid conflict with sdio/slave example test add Kconfig option to enable ASCII and RTU mode separately update ASCII options + remove cast for errors added baudrate for examples into Kconfig updated magic numbers for timer timeout put ascii private definitions into one file
2019-11-26 05:16:25 +00:00
#define MB_SER_PDU_SIZE_LRC 1 /*!< Size of LRC field in PDU. */
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
/* ----------------------- Prototypes 0-------------------------------------*/
typedef void ( *pvMBFrameStart ) ( void );
typedef void ( *pvMBFrameStop ) ( void );
typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress,
UCHAR ** pucFrame,
USHORT * pusLength );
typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress,
const UCHAR * pucFrame,
USHORT usLength );
typedef void( *pvMBFrameClose ) ( void );
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
Reference in a new issue Copy permalink