OVMS3-idf/components/esp_common/Kconfig

231 lines
8.8 KiB
Text
Raw Normal View History

menu "Common ESP-related"
config ESP_ERR_TO_NAME_LOOKUP
bool "Enable lookup of error code strings"
default "y"
help
Functions esp_err_to_name() and esp_err_to_name_r() return string representations of error codes from a
pre-generated lookup table. This option can be used to turn off the use of the look-up table in order to
save memory but this comes at the price of sacrificing distinguishable (meaningful) output string
representations.
config ESP_SYSTEM_EVENT_QUEUE_SIZE
int "System event queue size"
default 32
help
Config system event queue size in different application.
config ESP_SYSTEM_EVENT_TASK_STACK_SIZE
int "Event loop task stack size"
default 2304
help
Config system event task stack size in different application.
config ESP_MAIN_TASK_STACK_SIZE
int "Main task stack size"
default 3584
help
Configure the "main task" stack size. This is the stack of the task
which calls app_main(). If app_main() returns then this task is deleted
and its stack memory is freed.
config ESP_IPC_TASK_STACK_SIZE
int "Inter-Processor Call (IPC) task stack size"
2019-09-13 12:49:11 +00:00
range 512 65536 if !APPTRACE_ENABLE
range 2048 65536 if APPTRACE_ENABLE
default 2048 if APPTRACE_ENABLE
2019-10-04 10:14:05 +00:00
default 1024
help
Configure the IPC tasks stack size. One IPC task runs on each core
(in dual core mode), and allows for cross-core function calls.
See IPC documentation for more details.
The default stack size should be enough for most common use cases.
It can be shrunk if you are sure that you do not use any custom
IPC functionality.
config ESP_IPC_USES_CALLERS_PRIORITY
bool "IPC runs at caller's priority"
default y
depends on !FREERTOS_UNICORE
help
If this option is not enabled then the IPC task will keep behavior
same as prior to that of ESP-IDF v4.0, and hence IPC task will run
at (configMAX_PRIORITIES - 1) priority.
config ESP_MINIMAL_SHARED_STACK_SIZE
int "Minimal allowed size for shared stack"
default 2048
help
Minimal value of size, in bytes, accepted to execute a expression
with shared stack.
choice ESP_CONSOLE_UART
prompt "UART for console output"
default ESP_CONSOLE_UART_DEFAULT
help
Select whether to use UART for console output (through stdout and stderr).
- Default is to use UART0 on pins GPIO1(TX) and GPIO3(RX).
- If "Custom" is selected, UART0 or UART1 can be chosen,
and any pins can be selected.
- If "None" is selected, there will be no console output on any UART, except
for initial output from ROM bootloader. This output can be further suppressed by
bootstrapping GPIO13 pin to low logic level.
config ESP_CONSOLE_UART_DEFAULT
bool "Default: UART0, TX=GPIO1, RX=GPIO3"
config ESP_CONSOLE_UART_CUSTOM
bool "Custom"
config ESP_CONSOLE_UART_NONE
bool "None"
endchoice
choice ESP_CONSOLE_UART_NUM
prompt "UART peripheral to use for console output (0-1)"
depends on ESP_CONSOLE_UART_CUSTOM
default ESP_CONSOLE_UART_CUSTOM_NUM_0
help
Due of a ROM bug, UART2 is not supported for console output
via ets_printf.
config ESP_CONSOLE_UART_CUSTOM_NUM_0
bool "UART0"
config ESP_CONSOLE_UART_CUSTOM_NUM_1
bool "UART1"
endchoice
config ESP_CONSOLE_UART_NUM
int
default 0 if ESP_CONSOLE_UART_DEFAULT || ESP_CONSOLE_UART_NONE
default 0 if ESP_CONSOLE_UART_CUSTOM_NUM_0
default 1 if ESP_CONSOLE_UART_CUSTOM_NUM_1
config ESP_CONSOLE_UART_TX_GPIO
int "UART TX on GPIO#"
depends on ESP_CONSOLE_UART_CUSTOM
range 0 33
default 19
config ESP_CONSOLE_UART_RX_GPIO
int "UART RX on GPIO#"
depends on ESP_CONSOLE_UART_CUSTOM
range 0 39
default 21
config ESP_CONSOLE_UART_BAUDRATE
int "UART console baud rate"
depends on !ESP_CONSOLE_UART_NONE
default 115200
range 1200 4000000
config ESP_INT_WDT
bool "Interrupt watchdog"
default y
help
This watchdog timer can detect if the FreeRTOS tick interrupt has not been called for a certain time,
either because a task turned off interrupts and did not turn them on for a long time, or because an
interrupt handler did not return. It will try to invoke the panic handler first and failing that
reset the SoC.
config ESP_INT_WDT_TIMEOUT_MS
int "Interrupt watchdog timeout (ms)"
depends on ESP_INT_WDT
default 300 if !ESP32_SPIRAM_SUPPORT
default 800 if ESP32_SPIRAM_SUPPORT
range 10 10000
help
The timeout of the watchdog, in miliseconds. Make this higher than the FreeRTOS tick rate.
config ESP_INT_WDT_CHECK_CPU1
bool "Also watch CPU1 tick interrupt"
depends on ESP_INT_WDT && !FREERTOS_UNICORE
default y
help
Also detect if interrupts on CPU 1 are disabled for too long.
config ESP_TASK_WDT
bool "Initialize Task Watchdog Timer on startup"
default y
help
The Task Watchdog Timer can be used to make sure individual tasks are still
running. Enabling this option will cause the Task Watchdog Timer to be
initialized automatically at startup. The Task Watchdog timer can be
initialized after startup as well (see Task Watchdog Timer API Reference)
config ESP_TASK_WDT_PANIC
bool "Invoke panic handler on Task Watchdog timeout"
depends on ESP_TASK_WDT
default n
help
If this option is enabled, the Task Watchdog Timer will be configured to
trigger the panic handler when it times out. This can also be configured
at run time (see Task Watchdog Timer API Reference)
config ESP_TASK_WDT_TIMEOUT_S
int "Task Watchdog timeout period (seconds)"
depends on ESP_TASK_WDT
range 1 60
default 5
help
Timeout period configuration for the Task Watchdog Timer in seconds.
This is also configurable at run time (see Task Watchdog Timer API Reference)
config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0
bool "Watch CPU0 Idle Task"
depends on ESP_TASK_WDT
default y
help
If this option is enabled, the Task Watchdog Timer will watch the CPU0
Idle Task. Having the Task Watchdog watch the Idle Task allows for detection
of CPU starvation as the Idle Task not being called is usually a symptom of
CPU starvation. Starvation of the Idle Task is detrimental as FreeRTOS household
tasks depend on the Idle Task getting some runtime every now and then.
config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1
bool "Watch CPU1 Idle Task"
depends on ESP_TASK_WDT && !FREERTOS_UNICORE
default y
help
If this option is enabled, the Task Wtachdog Timer will wach the CPU1
Idle Task.
config ESP_PANIC_HANDLER_IRAM
bool "Place panic handler code in IRAM"
default n
2020-01-17 03:47:08 +00:00
depends on IDF_TARGET_ESP32 # pending ESP32-S2 support
help
If this option is disabled (default), the panic handler code is placed in flash not IRAM.
This means that if ESP-IDF crashes while flash cache is disabled, the panic handler will
automatically re-enable flash cache before running GDB Stub or Core Dump. This adds some minor
risk, if the flash cache status is also corrupted during the crash.
If this option is enabled, the panic handler code is placed in IRAM. This allows the panic
handler to run without needing to re-enable cache first. This may be necessary to debug some
complex issues with crashes while flash cache is disabled (for example, when writing to
SPI flash.)
2019-09-13 12:49:11 +00:00
config ESP_DEBUG_STUBS_ENABLE
bool
default COMPILER_OPTIMIZATION_LEVEL_DEBUG
depends on !ESP32_TRAX && !ESP32S2_TRAX
help
Debug stubs are used by OpenOCD to execute pre-compiled onboard code
which does some useful debugging stuff, e.g. GCOV data dump.
2020-01-10 09:46:46 +00:00
config ESP_MAC_ADDR_UNIVERSE_WIFI_STA
bool
config ESP_MAC_ADDR_UNIVERSE_WIFI_AP
bool
config ESP_MAC_ADDR_UNIVERSE_BT
bool
config ESP_MAC_ADDR_UNIVERSE_ETH
bool
endmenu # Common ESP-related