2017-02-20 03:56:12 +00:00
|
|
|
// Copyright 2013-2016 Espressif Systems (Shanghai) PTE LTD
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
//
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
2017-02-07 09:58:01 +00:00
|
|
|
#include "esp_types.h"
|
|
|
|
#include "rom/ets_sys.h"
|
2017-02-20 07:18:58 +00:00
|
|
|
#include "esp_psram.h"
|
2017-02-07 09:58:01 +00:00
|
|
|
#include "soc/io_mux_reg.h"
|
|
|
|
#include "soc/dport_reg.h"
|
|
|
|
#include "rom/gpio.h"
|
|
|
|
#include "soc/gpio_sig_map.h"
|
|
|
|
#include "esp_attr.h"
|
|
|
|
#include "rom/cache.h"
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
|
|
#include "freertos/timers.h"
|
|
|
|
#include "freertos/task.h"
|
|
|
|
#include "string.h"
|
|
|
|
#include "rom/spi_flash.h"
|
|
|
|
#include "esp_err.h"
|
2017-02-21 09:24:14 +00:00
|
|
|
#include "rom/cache.h"
|
2017-02-22 01:28:59 +00:00
|
|
|
#include "driver/gpio.h"
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-21 09:18:47 +00:00
|
|
|
//Commands for PSRAM chip
|
2017-02-20 07:18:58 +00:00
|
|
|
#define PSRAM_READ 0x03
|
|
|
|
#define PSRAM_FAST_READ 0x0B
|
|
|
|
#define PSRAM_FAST_READ_QUAD 0xEB
|
|
|
|
#define PSRAM_WRITE 0x02
|
|
|
|
#define PSRAM_QUAD_WRITE 0x38
|
|
|
|
#define PSRAM_ENTER_QMODE 0x35
|
|
|
|
#define PSRAM_EXIT_QMODE 0xF5
|
|
|
|
#define PSRAM_RESET_EN 0x66
|
|
|
|
#define PSRAM_RESET 0x99
|
|
|
|
#define PSRAM_SET_BURST_LEN 0xC0
|
|
|
|
#define PSRAM_DEVICE_ID 0x9F
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
#define PSRAM_MFG_ID_M 0xff
|
|
|
|
#define PSRAM_MFG_ID_S 8
|
|
|
|
#define PSRAM_MFG_ID_ESPRESSIF 0x5d
|
|
|
|
|
|
|
|
#define PSRAM_CLK_IO 17
|
|
|
|
#define PSRAM_CS_IO 16
|
|
|
|
|
2017-02-20 07:18:58 +00:00
|
|
|
typedef enum {
|
|
|
|
PSRAM_SPI_1 = 0x1,
|
|
|
|
PSRAM_SPI_2,
|
|
|
|
PSRAM_SPI_3,
|
|
|
|
PSRAM_SPI_MAX ,
|
|
|
|
} psram_spi_num_t;
|
|
|
|
|
2017-02-21 09:18:47 +00:00
|
|
|
static psram_cache_mode_t s_psram_mode = PSRAM_CACHE_MAX;
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//For now, we only use F40M + S40M, and we don't have to go through gpio matrix
|
2017-02-22 01:28:59 +00:00
|
|
|
#define DISABLE_GPIO_MATRIX_FOR_40M 1
|
2017-02-07 09:58:01 +00:00
|
|
|
static int extra_dummy = 0;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
PSRAM_CMD_QPI,
|
|
|
|
PSRAM_CMD_SPI,
|
|
|
|
} psram_cmd_mode_t;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
uint16_t cmd; /*!< Command value */
|
|
|
|
uint16_t cmdBitLen; /*!< Command byte length*/
|
|
|
|
uint32_t *addr; /*!< Point to address value*/
|
|
|
|
uint16_t addrBitLen; /*!< Address byte length*/
|
|
|
|
uint32_t *txData; /*!< Point to send data buffer*/
|
|
|
|
uint16_t txDataBitLen; /*!< Send data byte length.*/
|
|
|
|
uint32_t *rxData; /*!< Point to recevie data buffer*/
|
|
|
|
uint16_t rxDataBitLen; /*!< Recevie Data byte length.*/
|
|
|
|
uint32_t dummyBitLen;
|
|
|
|
} psram_cmd_t;
|
|
|
|
|
2017-02-21 03:48:42 +00:00
|
|
|
static void IRAM_ATTR psram_cache_init(psram_cache_mode_t psram_cache_mode, psram_vaddr_mode_t vaddrmode);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_clear_spi_fifo(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
|
|
|
int i;
|
2017-02-22 01:28:59 +00:00
|
|
|
for (i = 0; i < 16; i++) {
|
|
|
|
WRITE_PERI_REG(SPI_W0_REG(spi_num)+i*4, 0);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//set basic SPI write mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_set_basic_write_mode(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_QIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_DIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_QUAD);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_DUAL);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
//set QPI write mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_set_qio_write_mode(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_QIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_DIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_QUAD);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_FWRITE_DUAL);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
//set QPI read mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_set_qio_read_mode(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_QIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_QUAD);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_DUAL);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_DIO);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
//set SPI read mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_set_basic_read_mode(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_QIO);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_QUAD);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_DUAL);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_FREAD_DIO);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//start sending and wait for finishing
|
2017-02-22 01:28:59 +00:00
|
|
|
static IRAM_ATTR void psram_cmd_start(psram_spi_num_t spi_num, psram_cmd_mode_t cmd_mode)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
|
|
|
//get cs1
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS1_DIS_M);
|
|
|
|
SET_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS0_DIS_M);
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
uint32_t wr_mode_backup = (READ_PERI_REG(SPI_USER_REG(spi_num)) >> SPI_FWRITE_DUAL_S) & 0xf;
|
|
|
|
uint32_t rd_mode_backup = READ_PERI_REG(SPI_CTRL_REG(spi_num)) & (SPI_FREAD_DIO_M | SPI_FREAD_DUAL_M | SPI_FREAD_QUAD_M | SPI_FREAD_QIO_M);
|
|
|
|
if (cmd_mode == PSRAM_CMD_SPI) {
|
|
|
|
psram_set_basic_write_mode(spi_num);
|
|
|
|
psram_set_basic_read_mode(spi_num);
|
2017-02-07 09:58:01 +00:00
|
|
|
} else if (cmd_mode == PSRAM_CMD_QPI) {
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_set_qio_write_mode(spi_num);
|
|
|
|
psram_set_qio_read_mode(spi_num);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//WAIT SPI0 IDLE
|
|
|
|
//READ THREE TIMES TO MAKE SURE?
|
2017-02-22 01:28:59 +00:00
|
|
|
while( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
|
|
|
while( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
|
|
|
while( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_MASK( DPORT_HOST_INF_SEL_REG, 1<<14);
|
|
|
|
|
|
|
|
// Start send data
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_CMD_REG(spi_num), SPI_USR);
|
|
|
|
while ((READ_PERI_REG(SPI_CMD_REG(spi_num)) & SPI_USR));
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(DPORT_HOST_INF_SEL_REG, 1 << 14);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//recover spi mode
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_USER_REG(spi_num), 0xf, wr_mode_backup, SPI_FWRITE_DUAL_S);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), (SPI_FREAD_DIO_M|SPI_FREAD_DUAL_M|SPI_FREAD_QUAD_M|SPI_FREAD_QIO_M));
|
|
|
|
SET_PERI_REG_MASK(SPI_CTRL_REG(spi_num), rd_mode_backup);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//return cs to cs0
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS1_DIS_M);
|
2017-02-07 09:58:01 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1),SPI_CS0_DIS_M);
|
|
|
|
}
|
|
|
|
|
|
|
|
//start sending cmd/addr and receving data
|
2017-02-22 01:28:59 +00:00
|
|
|
static void IRAM_ATTR psram_recv_start(psram_spi_num_t spi_num, uint32_t* pRxData, uint16_t rxByteLen,
|
|
|
|
psram_cmd_mode_t cmd_mode)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
|
|
|
//get cs1
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS1_DIS_M);
|
|
|
|
SET_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS0_DIS_M);
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
uint32_t cmd_mode_backup = (READ_PERI_REG(SPI_USER_REG(spi_num)) >> SPI_FWRITE_DUAL_S) & 0xf;
|
|
|
|
uint32_t rd_mode_backup = READ_PERI_REG(SPI_CTRL_REG(spi_num)) & (SPI_FREAD_DIO_M | SPI_FREAD_DUAL_M | SPI_FREAD_QUAD_M | SPI_FREAD_QIO_M);
|
|
|
|
if (cmd_mode == PSRAM_CMD_SPI) {
|
|
|
|
psram_set_basic_write_mode(spi_num);
|
|
|
|
psram_set_basic_read_mode(spi_num);
|
2017-02-07 09:58:01 +00:00
|
|
|
} else if (cmd_mode == PSRAM_CMD_QPI) {
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_set_qio_write_mode(spi_num);
|
|
|
|
psram_set_qio_read_mode(spi_num);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//WAIT SPI0 IDLE
|
|
|
|
//READ THREE TIMES TO MAKE SURE?
|
2017-02-22 01:28:59 +00:00
|
|
|
while ( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
|
|
|
while ( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
|
|
|
while ( READ_PERI_REG(SPI_EXT2_REG(0)) != 0);
|
|
|
|
SET_PERI_REG_MASK(DPORT_HOST_INF_SEL_REG, 1 << 14);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
// Start send data
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_CMD_REG(spi_num), SPI_USR);
|
|
|
|
while ((READ_PERI_REG(SPI_CMD_REG(spi_num)) & SPI_USR));
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_HOST_INF_SEL_REG, 1 << 14);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//recover spi mode
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_USER_REG(spi_num), SPI_FWRITE_DUAL_M, cmd_mode_backup, SPI_FWRITE_DUAL_S);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), (SPI_FREAD_DIO_M|SPI_FREAD_DUAL_M|SPI_FREAD_QUAD_M|SPI_FREAD_QIO_M));
|
|
|
|
SET_PERI_REG_MASK(SPI_CTRL_REG(spi_num), rd_mode_backup);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//return cs to cs0
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS1_DIS_M);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(PSRAM_SPI_1), SPI_CS0_DIS_M);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-20 03:56:12 +00:00
|
|
|
int idx = 0;
|
|
|
|
// Read data out
|
|
|
|
do {
|
2017-02-22 01:28:59 +00:00
|
|
|
*pRxData++ = READ_PERI_REG(SPI_W0_REG(spi_num) + (idx << 2));
|
2017-02-20 03:56:12 +00:00
|
|
|
} while (++idx < ((rxByteLen / 4) + ((rxByteLen % 4) ? 1 : 0)));
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//setup spi command/addr/data/dummy in user mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static int psram_cmd_config(psram_spi_num_t spi_num, psram_cmd_t* pInData)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
while (READ_PERI_REG(SPI_CMD_REG(spi_num)) & SPI_USR);
|
2017-02-07 09:58:01 +00:00
|
|
|
// Set command by user.
|
|
|
|
if (pInData->cmdBitLen != 0) {
|
|
|
|
// Max command length 16 bits.
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_USER2_REG(spi_num), SPI_USR_COMMAND_BITLEN, pInData->cmdBitLen - 1,
|
|
|
|
SPI_USR_COMMAND_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
// Enable command
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_COMMAND);
|
2017-02-07 09:58:01 +00:00
|
|
|
// Load command,bit15-0 is cmd value.
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_USER2_REG(spi_num), SPI_USR_COMMAND_VALUE, pInData->cmd, SPI_USR_COMMAND_VALUE_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
} else {
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_COMMAND);
|
|
|
|
SET_PERI_REG_BITS(SPI_USER2_REG(spi_num), SPI_USR_COMMAND_BITLEN, 0, SPI_USR_COMMAND_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
// Set Address by user.
|
|
|
|
if (pInData->addrBitLen != 0) {
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(spi_num), SPI_USR_ADDR_BITLEN, (pInData->addrBitLen - 1), SPI_USR_ADDR_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
// Enable address
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_ADDR);
|
2017-02-07 09:58:01 +00:00
|
|
|
// Set address
|
2017-02-22 01:28:59 +00:00
|
|
|
//SET_PERI_REG_BITS(SPI_ADDR_REG(spi_num), SPI_USR_ADDR_VALUE, *pInData->addr, SPI_USR_ADDR_VALUE_S);
|
|
|
|
WRITE_PERI_REG(SPI_ADDR_REG(spi_num), *pInData->addr);
|
2017-02-21 09:18:47 +00:00
|
|
|
} else {
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_ADDR);
|
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(spi_num), SPI_USR_ADDR_BITLEN, 0, SPI_USR_ADDR_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
// Set data by user.
|
2017-02-22 01:28:59 +00:00
|
|
|
uint32_t* p_tx_val = pInData->txData;
|
|
|
|
if (pInData->txDataBitLen != 0) {
|
2017-02-20 03:56:12 +00:00
|
|
|
// Enable MOSI
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_MOSI);
|
2017-02-20 03:56:12 +00:00
|
|
|
// Load send buffer
|
2017-02-21 09:52:20 +00:00
|
|
|
int len = (pInData->txDataBitLen + 31) / 32;
|
2017-02-22 01:28:59 +00:00
|
|
|
if (p_tx_val != NULL) {
|
|
|
|
memcpy((void*)SPI_W0_REG(spi_num), p_tx_val, len * 4);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
2017-02-20 03:56:12 +00:00
|
|
|
// Set data send buffer length.Max data length 64 bytes.
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_MOSI_DLEN_REG(spi_num), SPI_USR_MOSI_DBITLEN, (pInData->txDataBitLen - 1),
|
|
|
|
SPI_USR_MOSI_DBITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
} else {
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_MOSI);
|
|
|
|
SET_PERI_REG_BITS(SPI_MOSI_DLEN_REG(spi_num), SPI_USR_MOSI_DBITLEN, 0, SPI_USR_MOSI_DBITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
// Set rx data by user.
|
2017-02-22 01:28:59 +00:00
|
|
|
if (pInData->rxDataBitLen != 0) {
|
2017-02-07 09:58:01 +00:00
|
|
|
// Enable MOSI
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_MISO);
|
2017-02-20 03:56:12 +00:00
|
|
|
// Set data send buffer length.Max data length 64 bytes.
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_MISO_DLEN_REG(spi_num), SPI_USR_MISO_DBITLEN, (pInData->rxDataBitLen - 1),
|
|
|
|
SPI_USR_MISO_DBITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
} else {
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_USR_MISO);
|
|
|
|
SET_PERI_REG_BITS(SPI_MISO_DLEN_REG(spi_num), SPI_USR_MISO_DBITLEN, 0, SPI_USR_MISO_DBITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
2017-02-22 01:28:59 +00:00
|
|
|
if (pInData->dummyBitLen != 0) {
|
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_USR_DUMMY); // dummy en
|
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(PSRAM_SPI_1), SPI_USR_DUMMY_CYCLELEN_V, pInData->dummyBitLen - 1,
|
|
|
|
SPI_USR_DUMMY_CYCLELEN_S); //DUMMY
|
2017-02-21 09:18:47 +00:00
|
|
|
} else {
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_USR_DUMMY); // dummy en
|
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(PSRAM_SPI_1), SPI_USR_DUMMY_CYCLELEN_V, 0, SPI_USR_DUMMY_CYCLELEN_S); //DUMMY
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
//exit QPI mode(set back to SPI mode)
|
|
|
|
static void psram_disable_qio_mode(psram_spi_num_t spi_num)
|
|
|
|
{
|
|
|
|
psram_cmd_t ps_cmd;
|
|
|
|
uint32_t cmd_exit_qpi;
|
|
|
|
switch (s_psram_mode) {
|
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
|
|
|
cmd_exit_qpi = PSRAM_EXIT_QMODE;
|
|
|
|
ps_cmd.txDataBitLen = 8;
|
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
|
|
|
cmd_exit_qpi = PSRAM_EXIT_QMODE << 8;
|
|
|
|
ps_cmd.txDataBitLen = 16;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ps_cmd.txData = &cmd_exit_qpi;
|
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.cmdBitLen = 0;
|
|
|
|
ps_cmd.addr = 0;
|
|
|
|
ps_cmd.addrBitLen = 0;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = 0;
|
|
|
|
ps_cmd.dummyBitLen = 0;
|
|
|
|
psram_cmd_config(spi_num, &ps_cmd);
|
|
|
|
psram_cmd_start(spi_num, PSRAM_CMD_QPI);
|
|
|
|
}
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-21 06:00:05 +00:00
|
|
|
//The following helper functions aren't used in this code right now, but may be useful for other SPI RAM chips.
|
|
|
|
#if 0
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
static void psram_dma_cmd_write_config(uint32_t dst, uint32_t len, uint32_t dummy_bits)
|
|
|
|
{
|
|
|
|
uint32_t addr = (PSRAM_QUAD_WRITE << 24) | dst;
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
|
|
|
switch(s_psram_mode) {
|
2017-02-07 09:58:01 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmdBitLen = 0;
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmdBitLen = 2;
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.addr = &addr;
|
|
|
|
ps_cmd.addrBitLen = 32;
|
|
|
|
ps_cmd.txData = NULL;
|
|
|
|
ps_cmd.txDataBitLen = len * 8;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = 0;
|
|
|
|
ps_cmd.dummyBitLen = dummy_bits;
|
|
|
|
psram_cmd_config(PSRAM_SPI_1, &ps_cmd);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_dma_qio_read_config(psram_spi_num_t spi_num, uint32_t src, uint32_t len)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
uint32_t addr = (PSRAM_FAST_READ_QUAD << 24) | src;
|
2017-02-07 09:58:01 +00:00
|
|
|
uint32_t dummy_bits = 0;
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
2017-02-22 01:28:59 +00:00
|
|
|
switch(s_psram_mode) {
|
2017-02-07 09:58:01 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
|
|
|
dummy_bits = 6+extra_dummy;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmdBitLen = 0;
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
|
|
|
dummy_bits = 6+extra_dummy;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmdBitLen = 2;
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.addr = &addr;
|
|
|
|
ps_cmd.addrBitLen = 4*8;
|
|
|
|
ps_cmd.txDataBitLen = 0;
|
|
|
|
ps_cmd.txData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = len*8 ;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.dummyBitLen = dummy_bits;
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_cmd_config(spi_num,&ps_cmd);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//switch psram burst length(32 bytes or 1024 bytes)
|
|
|
|
//datasheet says it should be 1024 bytes by default
|
|
|
|
//but they sent us a correction doc and told us it is 32 bytes for these samples
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_set_burst_length(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
2017-02-22 01:28:59 +00:00
|
|
|
switch (s_psram_mode) {
|
2017-02-20 03:56:12 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmd = 0xC0;
|
|
|
|
ps_cmd.cmdBitLen = 8;
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmd = 0x0030;
|
|
|
|
ps_cmd.cmdBitLen = 10;
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.addr = 0;
|
|
|
|
ps_cmd.addrBitLen = 0;
|
|
|
|
ps_cmd.txData = NULL;
|
|
|
|
ps_cmd.txDataBitLen = 0;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = 0;
|
|
|
|
ps_cmd.dummyBitLen = 0;
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_cmd_config(spi_num, &ps_cmd);
|
|
|
|
psram_cmd_start(spi_num, PSRAM_CMD_QPI);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//send reset command to psram(right now,we only send this command in QPI mode)
|
|
|
|
//seems not working
|
2017-02-22 01:28:59 +00:00
|
|
|
static void psram_reset_mode(psram_spi_num_t spi_num)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
2017-02-20 03:56:12 +00:00
|
|
|
uint32_t cmd_rst = 0x99066;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.txData = &cmd_rst;
|
|
|
|
ps_cmd.txDataBitLen = 20;
|
|
|
|
ps_cmd.addr = NULL;
|
|
|
|
ps_cmd.addrBitLen = 0;
|
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.cmdBitLen = 0;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = 0;
|
|
|
|
ps_cmd.dummyBitLen = 0;
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_cmd_config(spi_num, &ps_cmd);
|
|
|
|
psram_cmd_start(spi_num, PSRAM_CMD_QPI);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void IRAM_ATTR psram_gpio_config(psram_cache_mode_t mode)
|
|
|
|
{
|
|
|
|
gpio_matrix_out(6, SPICLK_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_out(11, SPICS0_OUT_IDX, 0, 0);
|
2017-02-20 03:56:12 +00:00
|
|
|
gpio_matrix_out(7, SPIQ_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(7,SPIQ_IN_IDX, 0);
|
|
|
|
gpio_matrix_out(8, SPID_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(8, SPID_IN_IDX, 0);
|
|
|
|
gpio_matrix_out(10, SPIWP_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(10, SPIWP_IN_IDX, 0);
|
|
|
|
gpio_matrix_out(9, SPIHD_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(9, SPIHD_IN_IDX, 0);
|
|
|
|
switch(mode){
|
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(0),SPI_USR_DUMMY); // dummy en
|
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(0),SPI_USR_DUMMY_CYCLELEN_V,3+extra_dummy,SPI_USR_DUMMY_CYCLELEN_S); //DUMMY
|
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(0),SPI_USR_DUMMY); // dummy en
|
|
|
|
SET_PERI_REG_BITS(SPI_USER1_REG(0),SPI_USR_DUMMY_CYCLELEN_V,3+extra_dummy,SPI_USR_DUMMY_CYCLELEN_S); //DUMMY
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
//drive ability
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_DATA0_U,FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_DATA1_U,FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_DATA2_U,FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_DATA3_U,FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
SET_PERI_REG_BITS( PERIPHS_IO_MUX_SD_CMD_U, FUN_DRV, 3 ,FUN_DRV_S);
|
|
|
|
//select pin function gpio
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA0_U,2);
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA1_U,2);
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA2_U,2);
|
2017-02-07 09:58:01 +00:00
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA3_U,2);
|
|
|
|
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U,2);
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CMD_U,2);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2017-02-21 06:00:05 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
//read psram id
|
|
|
|
static void psram_read_id(uint32_t* dev_id)
|
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_spi_num_t spi_num = PSRAM_SPI_1;
|
|
|
|
psram_disable_qio_mode(spi_num);
|
|
|
|
uint32_t addr = (PSRAM_DEVICE_ID << 24) | 0;
|
2017-02-21 06:00:05 +00:00
|
|
|
uint32_t dummy_bits = 0;
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
2017-02-22 01:28:59 +00:00
|
|
|
switch (s_psram_mode) {
|
2017-02-21 06:00:05 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-22 01:28:59 +00:00
|
|
|
dummy_bits = 0 + extra_dummy;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmdBitLen = 0;
|
2017-02-21 06:00:05 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-22 01:28:59 +00:00
|
|
|
dummy_bits = 0 + extra_dummy;
|
|
|
|
ps_cmd.cmdBitLen = 2; //this two bits is used to delay 2 clock cycle
|
2017-02-21 06:00:05 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.addr = &addr;
|
2017-02-22 01:28:59 +00:00
|
|
|
ps_cmd.addrBitLen = 4 * 8;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.txDataBitLen = 0;
|
|
|
|
ps_cmd.txData = NULL;
|
2017-02-22 01:28:59 +00:00
|
|
|
ps_cmd.rxDataBitLen = 4 * 8;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.rxData = dev_id;
|
|
|
|
ps_cmd.dummyBitLen = dummy_bits;
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_cmd_config(spi_num, &ps_cmd);
|
|
|
|
psram_clear_spi_fifo(spi_num);
|
|
|
|
psram_recv_start(spi_num, ps_cmd.rxData, ps_cmd.rxDataBitLen / 8, PSRAM_CMD_SPI);
|
2017-02-21 06:00:05 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//enter QPI mode
|
2017-02-22 01:28:59 +00:00
|
|
|
static esp_err_t IRAM_ATTR psram_enable_qio_mode(psram_spi_num_t spi_num)
|
2017-02-21 06:00:05 +00:00
|
|
|
{
|
2017-02-21 09:18:47 +00:00
|
|
|
psram_cmd_t ps_cmd;
|
2017-02-22 01:28:59 +00:00
|
|
|
uint32_t addr = (PSRAM_ENTER_QMODE << 24) | 0;
|
|
|
|
switch (s_psram_mode) {
|
2017-02-21 06:00:05 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-22 01:28:59 +00:00
|
|
|
ps_cmd.cmdBitLen = 0;
|
2017-02-21 06:00:05 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-22 01:28:59 +00:00
|
|
|
ps_cmd.cmdBitLen = 2;
|
2017-02-21 06:00:05 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-22 01:28:59 +00:00
|
|
|
ps_cmd.cmd = 0;
|
|
|
|
ps_cmd.addr = &addr;
|
|
|
|
ps_cmd.addrBitLen = 8;
|
2017-02-21 09:18:47 +00:00
|
|
|
ps_cmd.txData = NULL;
|
|
|
|
ps_cmd.txDataBitLen = 0;
|
|
|
|
ps_cmd.rxData = NULL;
|
|
|
|
ps_cmd.rxDataBitLen = 0;
|
|
|
|
ps_cmd.dummyBitLen = 0;
|
2017-02-22 01:28:59 +00:00
|
|
|
psram_cmd_config(spi_num, &ps_cmd);
|
|
|
|
psram_cmd_start(spi_num, PSRAM_CMD_SPI);
|
|
|
|
return ESP_OK;
|
2017-02-21 06:00:05 +00:00
|
|
|
}
|
|
|
|
|
2017-02-07 09:58:01 +00:00
|
|
|
//spi param init for psram
|
2017-02-22 01:28:59 +00:00
|
|
|
void IRAM_ATTR psram_spi_init(psram_spi_num_t spi_num, psram_cache_mode_t mode)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-20 03:56:12 +00:00
|
|
|
uint8_t i, k;
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_SLAVE_REG(spi_num), SPI_TRANS_DONE << 5);
|
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_CS_SETUP);
|
2017-02-07 09:58:01 +00:00
|
|
|
// SPI_CPOL & SPI_CPHA
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(spi_num), SPI_CK_IDLE_EDGE);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_CK_OUT_EDGE);
|
2017-02-07 09:58:01 +00:00
|
|
|
// SPI bit order
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_WR_BIT_ORDER);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CTRL_REG(spi_num), SPI_RD_BIT_ORDER);
|
2017-02-07 09:58:01 +00:00
|
|
|
// SPI bit order
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_DOUTDIN);
|
2017-02-07 09:58:01 +00:00
|
|
|
// May be not must to do.
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(SPI_USER1_REG(spi_num), 0);
|
2017-02-07 09:58:01 +00:00
|
|
|
// SPI mode type
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_SLAVE_REG(spi_num), SPI_SLAVE_MODE);
|
|
|
|
switch (mode) {
|
2017-02-20 03:56:12 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(SPI_CLOCK_REG(spi_num), SPI_CLK_EQU_SYSCLK); // 80Mhz speed
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
|
|
|
i = (2 / 40) ? (2 / 40) : 1;
|
|
|
|
k = 2 / i;
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_CLOCK_REG(spi_num), SPI_CLK_EQU_SYSCLK);
|
|
|
|
WRITE_PERI_REG(SPI_CLOCK_REG(spi_num),
|
2017-02-20 03:56:12 +00:00
|
|
|
(((i - 1) & SPI_CLKDIV_PRE) << SPI_CLKDIV_PRE_S) |
|
|
|
|
(((k - 1) & SPI_CLKCNT_N) << SPI_CLKCNT_N_S) |
|
|
|
|
((((k + 1) / 2 - 1) & SPI_CLKCNT_H) << SPI_CLKCNT_H_S) |
|
|
|
|
(((k - 1) & SPI_CLKCNT_L) << SPI_CLKCNT_L_S)); //clear bit 31,set SPI clock div
|
|
|
|
break;
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
// Enable MOSI
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_USER_REG(spi_num), SPI_CS_SETUP | SPI_CS_HOLD | SPI_USR_MOSI);
|
|
|
|
memset((void*)SPI_W0_REG(spi_num), 0, 16 * 4);
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//psram gpio init , different working frequency we have different solutions
|
2017-02-21 03:48:42 +00:00
|
|
|
esp_err_t IRAM_ATTR psram_enable(psram_cache_mode_t mode, psram_vaddr_mode_t vaddrmode) //psram init
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(GPIO_ENABLE_W1TC_REG, BIT(PSRAM_CLK_IO) | BIT(PSRAM_CS_IO)); //DISABLE OUPUT FOR IO16/17
|
|
|
|
assert(mode == PSRAM_CACHE_F40M_S40M && "we don't support any other mode for now.");
|
2017-02-21 09:18:47 +00:00
|
|
|
s_psram_mode = mode;
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN);
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST);
|
|
|
|
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_1);
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_1);
|
|
|
|
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_2);
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_2);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(SPI_EXT3_REG(0), 0x1);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_USR_PREP_HOLD_M);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
switch (mode) {
|
2017-02-20 03:56:12 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
|
|
|
psram_spi_init(PSRAM_SPI_1, mode);
|
|
|
|
extra_dummy = 2;
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_CS_HOLD);
|
2017-02-22 01:28:59 +00:00
|
|
|
gpio_matrix_out(PSRAM_CS_IO, SPICS1_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_out(PSRAM_CLK_IO, VSPICLK_OUT_IDX, 0, 0);
|
2017-02-20 03:56:12 +00:00
|
|
|
//use spi3 clock,but use spi1 data/cs wires
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(SPI_ADDR_REG(PSRAM_SPI_3), 32 << 24);
|
|
|
|
WRITE_PERI_REG(SPI_CLOCK_REG(PSRAM_SPI_3), SPI_CLK_EQU_SYSCLK_M); //SET 80M AND CLEAR OTHERS
|
|
|
|
SET_PERI_REG_MASK(SPI_CMD_REG(PSRAM_SPI_3), SPI_FLASH_READ_M);
|
2017-02-20 03:56:12 +00:00
|
|
|
uint32_t spi_status;
|
2017-02-22 01:28:59 +00:00
|
|
|
while (1) {
|
2017-02-20 03:56:12 +00:00
|
|
|
spi_status = READ_PERI_REG(SPI_EXT2_REG(PSRAM_SPI_3));
|
2017-02-22 01:28:59 +00:00
|
|
|
if (spi_status != 0 && spi_status != 1) {
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, BIT(PSRAM_CS_IO)); //DPORT_SPI_CLK_EN
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-22 01:28:59 +00:00
|
|
|
#if DISABLE_GPIO_MATRIX_FOR_40M
|
2017-02-20 03:56:12 +00:00
|
|
|
extra_dummy = 0;
|
2017-02-22 01:28:59 +00:00
|
|
|
#else
|
|
|
|
extra_dummy = 1;
|
2017-02-07 09:58:01 +00:00
|
|
|
#endif
|
2017-02-20 03:56:12 +00:00
|
|
|
psram_spi_init(PSRAM_SPI_1, mode);
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_CS_HOLD);
|
2017-02-22 01:28:59 +00:00
|
|
|
gpio_matrix_out(PSRAM_CS_IO, SPICS1_OUT_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(6, SIG_IN_FUNC224_IDX, 0);
|
|
|
|
gpio_matrix_out(20, SIG_IN_FUNC224_IDX, 0, 0);
|
|
|
|
gpio_matrix_in(20, SIG_IN_FUNC225_IDX, 0);
|
|
|
|
gpio_matrix_out(PSRAM_CLK_IO, SIG_IN_FUNC225_IDX, 0, 0);
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_USER_REG(PSRAM_SPI_1), SPI_CS_SETUP_M);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
#if (!DISABLE_GPIO_MATRIX_FOR_40M)
|
2017-02-07 09:58:01 +00:00
|
|
|
psram_gpio_config(mode);
|
|
|
|
#endif
|
2017-02-22 01:28:59 +00:00
|
|
|
WRITE_PERI_REG(GPIO_ENABLE_W1TS_REG, BIT(PSRAM_CS_IO)| BIT(PSRAM_CLK_IO));
|
|
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[PSRAM_CS_IO], 2);
|
|
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[PSRAM_CLK_IO], 2);
|
2017-02-07 09:58:01 +00:00
|
|
|
uint32_t id;
|
|
|
|
psram_read_id(&id);
|
2017-02-22 01:28:59 +00:00
|
|
|
if (((id >> PSRAM_MFG_ID_S) & PSRAM_MFG_ID_M) != PSRAM_MFG_ID_ESPRESSIF) {
|
2017-02-07 09:58:01 +00:00
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
psram_enable_qio_mode(PSRAM_SPI_1);
|
2017-02-21 03:48:42 +00:00
|
|
|
psram_cache_init(mode, vaddrmode);
|
2017-02-07 09:58:01 +00:00
|
|
|
return ESP_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
//register initialization for sram cache params and r/w commands
|
2017-02-21 03:48:42 +00:00
|
|
|
static void IRAM_ATTR psram_cache_init(psram_cache_mode_t psram_cache_mode, psram_vaddr_mode_t vaddrmode)
|
2017-02-07 09:58:01 +00:00
|
|
|
{
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_CLOCK_REG(0), SPI_CLK_EQU_SYSCLK_M);
|
|
|
|
SET_PERI_REG_BITS(SPI_CLOCK_REG(0), SPI_CLKDIV_PRE_V, 0, SPI_CLKDIV_PRE_S);
|
|
|
|
SET_PERI_REG_BITS(SPI_CLOCK_REG(0), SPI_CLKCNT_N, 1, SPI_CLKCNT_N_S);
|
|
|
|
SET_PERI_REG_BITS(SPI_CLOCK_REG(0), SPI_CLKCNT_H, 0, SPI_CLKCNT_H_S);
|
|
|
|
SET_PERI_REG_BITS(SPI_CLOCK_REG(0), SPI_CLKCNT_L, 1, SPI_CLKCNT_L_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
switch (psram_cache_mode) {
|
2017-02-20 03:56:12 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M:
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_DATE_REG(0), BIT(31)); //flash 1 div clk,80+40;
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_DATE_REG(0), BIT(30)); //pre clk div , ONLY IF SPI/SRAM@ DIFFERENT SPEED,JUST FOR SPI0. FLASH DIV 2+SRAM DIV4
|
|
|
|
WRITE_PERI_REG(SPI_CLOCK_REG(0), SPI_CLK_EQU_SYSCLK_M); //SET 1DIV CLOCK AND RESET OTHER PARAMS
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_USR_RD_SRAM_DUMMY_M); //enable cache read dummy
|
|
|
|
SET_PERI_REG_BITS(SPI_CACHE_SCTRL_REG(0), SPI_SRAM_DUMMY_CYCLELEN_V, 3 + extra_dummy,
|
|
|
|
SPI_SRAM_DUMMY_CYCLELEN_S); //dummy, psram cache : 40m--+1dummy,80m--+2dummy
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_CACHE_SRAM_USR_RCMD_M); //enable user mode for cache read command
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M:
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_DATE_REG(0), BIT(31)); //flash 1 div clk
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_DATE_REG(0), BIT(30)); //pre clk div , ONLY IF SPI/SRAM@ DIFFERENT SPEED,JUST FOR SPI0.
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_USR_RD_SRAM_DUMMY_M); //enable cache read dummy
|
|
|
|
SET_PERI_REG_BITS(SPI_CACHE_SCTRL_REG(0), SPI_SRAM_DUMMY_CYCLELEN_V, 3 + extra_dummy,
|
|
|
|
SPI_SRAM_DUMMY_CYCLELEN_S); //dummy, psram cache : 40m--+1dummy,80m--+2dummy
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_CACHE_SRAM_USR_RCMD_M); //enable user mode for cache read command
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
|
|
|
default:
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_DATE_REG(0), BIT(31)); //flash 1 div clk
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_DATE_REG(0), BIT(30)); //pre clk div
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_USR_RD_SRAM_DUMMY_M); //enable cache read dummy
|
|
|
|
SET_PERI_REG_BITS(SPI_CACHE_SCTRL_REG(0), SPI_SRAM_DUMMY_CYCLELEN_V, 3 + extra_dummy,
|
|
|
|
SPI_SRAM_DUMMY_CYCLELEN_S); //dummy, psram cache : 40m--+1dummy,80m--+2dummy
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_CACHE_SRAM_USR_RCMD_M); //enable user mode for cache read command
|
2017-02-20 03:56:12 +00:00
|
|
|
break;
|
2017-02-07 09:58:01 +00:00
|
|
|
}
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_CACHE_SRAM_USR_WCMD_M); // cache write command enable
|
|
|
|
SET_PERI_REG_BITS(SPI_CACHE_SCTRL_REG(0), SPI_SRAM_ADDR_BITLEN_V, 23, SPI_SRAM_ADDR_BITLEN_S); //write address for cache command.
|
|
|
|
SET_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_USR_SRAM_QIO_M); //enable qio mode for cache command
|
|
|
|
CLEAR_PERI_REG_MASK(SPI_CACHE_SCTRL_REG(0), SPI_USR_SRAM_DIO_M); //disable dio mode for cache command
|
2017-02-07 09:58:01 +00:00
|
|
|
|
|
|
|
//config sram cache r/w command
|
2017-02-22 01:28:59 +00:00
|
|
|
switch (psram_cache_mode) {
|
2017-02-07 09:58:01 +00:00
|
|
|
case PSRAM_CACHE_F80M_S80M: //in this mode , no delay is needed
|
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DWR_CMD_REG(0), SPI_CACHE_SRAM_USR_WR_CMD_BITLEN, 7,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DWR_CMD_REG(0), SPI_CACHE_SRAM_USR_WR_CMD_VALUE, 0x38,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_WR_CMD_VALUE_S); //0x38
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DRD_CMD_REG(0), SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_V, 7,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DRD_CMD_REG(0), SPI_CACHE_SRAM_USR_RD_CMD_VALUE_V, 0x0b,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_RD_CMD_VALUE_S); //0x0b
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
case PSRAM_CACHE_F80M_S40M: //is sram is @40M, need 2 cycles of delay
|
|
|
|
case PSRAM_CACHE_F40M_S40M:
|
2017-02-22 01:28:59 +00:00
|
|
|
default:
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DRD_CMD_REG(0), SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_V, 15,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_S); //read command length, 2 bytes(1byte for delay),sending in qio mode in cache
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DRD_CMD_REG(0), SPI_CACHE_SRAM_USR_RD_CMD_VALUE_V, 0x0b00,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_RD_CMD_VALUE_S); //0x0b, read command value,(0x00 for delay,0x0b for cmd)
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DWR_CMD_REG(0), SPI_CACHE_SRAM_USR_WR_CMD_BITLEN, 15,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_S); //write command length,2 bytes(1byte for delay,send in qio mode in cache)
|
2017-02-07 09:58:01 +00:00
|
|
|
SET_PERI_REG_BITS(SPI_SRAM_DWR_CMD_REG(0), SPI_CACHE_SRAM_USR_WR_CMD_VALUE, 0x3800,
|
2017-02-22 01:28:59 +00:00
|
|
|
SPI_CACHE_SRAM_USR_WR_CMD_VALUE_S); //0x38, write command value,(0x00 for delay)
|
2017-02-07 09:58:01 +00:00
|
|
|
break;
|
|
|
|
}
|
2017-02-21 03:48:42 +00:00
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PRO_CACHE_CTRL_REG, DPORT_PRO_DRAM_HL|DPORT_PRO_DRAM_SPLIT);
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_APP_CACHE_CTRL_REG, DPORT_APP_DRAM_HL|DPORT_APP_DRAM_SPLIT);
|
2017-02-21 03:48:42 +00:00
|
|
|
if (vaddrmode == PSRAM_VADDR_MODE_LOWHIGH) {
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(DPORT_PRO_CACHE_CTRL_REG, DPORT_PRO_DRAM_SPLIT);
|
|
|
|
SET_PERI_REG_MASK(DPORT_APP_CACHE_CTRL_REG, DPORT_APP_DRAM_SPLIT);
|
2017-02-21 03:48:42 +00:00
|
|
|
} else if (vaddrmode == PSRAM_VADDR_MODE_EVENODD) {
|
2017-02-22 01:28:59 +00:00
|
|
|
SET_PERI_REG_MASK(DPORT_PRO_CACHE_CTRL_REG, DPORT_PRO_DRAM_HL);
|
|
|
|
SET_PERI_REG_MASK(DPORT_APP_CACHE_CTRL_REG, DPORT_APP_DRAM_HL);
|
2017-02-21 03:48:42 +00:00
|
|
|
}
|
|
|
|
|
2017-02-22 01:28:59 +00:00
|
|
|
CLEAR_PERI_REG_MASK(DPORT_PRO_CACHE_CTRL1_REG, DPORT_PRO_CACHE_MASK_DRAM1|DPORT_PRO_CACHE_MASK_OPSDRAM); //use Dram1 to visit ext sram.
|
|
|
|
//cache page mode : 1 -->16k 4 -->2k 0-->32k,(accord with the settings in cache_sram_mmu_set)
|
|
|
|
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL1_REG, DPORT_PRO_CMMU_SRAM_PAGE_MODE, 0, DPORT_PRO_CMMU_SRAM_PAGE_MODE_S);
|
|
|
|
CLEAR_PERI_REG_MASK(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CACHE_MASK_DRAM1|DPORT_APP_CACHE_MASK_OPSDRAM); //use Dram1 to visit ext sram.
|
|
|
|
//cache page mode : 1 -->16k 4 -->2k 0-->32k,(accord with the settings in cache_sram_mmu_set)
|
|
|
|
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CMMU_SRAM_PAGE_MODE, 0, DPORT_APP_CMMU_SRAM_PAGE_MODE_S);
|
2017-02-07 09:58:01 +00:00
|
|
|
CLEAR_PERI_REG_MASK(SPI_PIN_REG(0), SPI_CS1_DIS_M); //ENABLE SPI0 CS1 TO PSRAM(CS0--FLASH; CS1--SRAM)
|
|
|
|
}
|
|
|
|
|