OVMS3-idf/components/bootloader/Makefile.projbuild

# Bootloader component (top-level project parts)
#
# The bootloader is not a real component that gets linked into the project.
# Instead it is an entire standalone project (in subproject/) that gets
# built in the upper project's build directory. This Makefile.projbuild provides
# the glue to build the bootloader project from the original project. It
# basically runs Make in the subproject/ directory but it needs to
# zero some variables the ESP-IDF project.mk makefile exports first, to not
# let them interfere.
#
BOOTLOADER_COMPONENT_PATH := $(COMPONENT_PATH)
BOOTLOADER_BUILD_DIR=$(abspath $(BUILD_DIR_BASE)/bootloader)
BOOTLOADER_BIN=$(BOOTLOADER_BUILD_DIR)/bootloader.bin

# signing key path is resolved relative to the project directory
CONFIG_SECURE_BOOT_SIGNING_KEY ?=
SECURE_BOOT_SIGNING_KEY=$(abspath $(call dequote,$(CONFIG_SECURE_BOOT_SIGNING_KEY)))
export SECURE_BOOT_SIGNING_KEY  # used by bootloader_support component

# Has a matching value in bootloader_support esp_flash_partitions.h
BOOTLOADER_OFFSET := 0x1000

# Custom recursive make for bootloader sub-project
#
# NB: Some variables are cleared in the environment, not
# overriden, because they need to be re-defined in the child
# project.
BOOTLOADER_MAKE= +\
	PROJECT_PATH= \
	COMPONENT_DIRS= \
	$(MAKE) -C $(BOOTLOADER_COMPONENT_PATH)/subproject \
	V=$(V) \
	BUILD_DIR_BASE=$(BOOTLOADER_BUILD_DIR) \
	TEST_COMPONENTS= \
	TESTS_ALL= \
	EXCLUDE_COMPONENTS=

.PHONY: bootloader-clean bootloader-flash bootloader-list-components bootloader $(BOOTLOADER_BIN)

$(BOOTLOADER_BIN): $(SDKCONFIG_MAKEFILE)
	$(BOOTLOADER_MAKE) $@

clean: bootloader-clean

bootloader-list-components:
	$(BOOTLOADER_MAKE) list-components

ifndef CONFIG_SECURE_BOOT_ENABLED
# If secure boot disabled, bootloader flashing is integrated
# with 'make flash' and no warnings are printed.

bootloader: $(BOOTLOADER_BIN) | check_python_dependencies
	@echo $(SEPARATOR)
	@echo "Bootloader built. Default flash command is:"
	@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $^"

ESPTOOL_ALL_FLASH_ARGS += $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)

bootloader-flash: $(BOOTLOADER_BIN) $(call prereq_if_explicit,erase_flash) | check_python_dependencies
	$(ESPTOOLPY_WRITE_FLASH) 0x1000 $^

else ifdef CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH

# One time flashing requires user to run esptool.py command themselves,
# and warning is printed about inability to reflash.
#
# The flashing command is deliberately printed without an auto-reset
# step, so the device doesn't immediately reset to flash itself.

bootloader: $(BOOTLOADER_BIN) | check_python_dependencies
	@echo $(SEPARATOR)
	@echo "Bootloader built. One-time flash command is:"
	@echo "$(subst hard_reset,no_reset,$(ESPTOOLPY_WRITE_FLASH)) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
	@echo $(SEPARATOR)
	@echo "* IMPORTANT: After first boot, BOOTLOADER CANNOT BE RE-FLASHED on same device"

else ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
# Reflashable secure bootloader
# generates a digest binary (bootloader + digest)

ifdef CONFIG_SECURE_BOOTLOADER_KEY_ENCODING_192BIT
KEY_DIGEST_LEN=192
else
KEY_DIGEST_LEN=256
endif

BOOTLOADER_DIGEST_BIN := $(BOOTLOADER_BUILD_DIR)/bootloader-reflash-digest.bin
SECURE_BOOTLOADER_KEY := $(BOOTLOADER_BUILD_DIR)/secure-bootloader-key-$(KEY_DIGEST_LEN).bin

ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
$(SECURE_BOOTLOADER_KEY): $(SECURE_BOOT_SIGNING_KEY) | check_python_dependencies
	$(ESPSECUREPY) digest_private_key --keylen $(KEY_DIGEST_LEN) -k $< $@
else
$(SECURE_BOOTLOADER_KEY):
	@echo "No pre-generated key for a reflashable secure bootloader is available, due to signing configuration."
	@echo "To generate one, you can use this command:"
	@echo "espsecure.py generate_flash_encryption_key $@"
	@echo "then re-run make."
	exit 1
endif

bootloader: $(BOOTLOADER_DIGEST_BIN)
	@echo $(SEPARATOR)
	@echo "Bootloader built and secure digest generated. First time flash command is:"
	@echo "$(ESPEFUSEPY) burn_key secure_boot $(SECURE_BOOTLOADER_KEY)"
	@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
	@echo $(SEPARATOR)
	@echo "To reflash the bootloader after initial flash:"
	@echo "$(ESPTOOLPY_WRITE_FLASH) 0x0 $(BOOTLOADER_DIGEST_BIN)"
	@echo $(SEPARATOR)
	@echo "* After first boot, only re-flashes of this kind (with same key) will be accepted."
	@echo "* Not recommended to re-use the same secure boot keyfile on multiple production devices."

$(BOOTLOADER_DIGEST_BIN): $(BOOTLOADER_BIN) $(SECURE_BOOTLOADER_KEY) | check_python_dependencies
	@echo "DIGEST $(notdir $@)"
	$(ESPSECUREPY) digest_secure_bootloader -k $(SECURE_BOOTLOADER_KEY) -o $@ $<

else # CONFIG_SECURE_BOOT_ENABLED && !CONFIG_SECURE_BOOTLOADER_REFLASHABLE && !CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH
bootloader:
	@echo "Invalid bootloader target: bad sdkconfig?"
	@exit 1
endif

ifndef CONFIG_SECURE_BOOT_ENABLED
# don't build bootloader by default if secure boot is enabled
all_binaries: $(BOOTLOADER_BIN)
endif

bootloader-clean: $(SDKCONFIG_MAKEFILE)
	$(BOOTLOADER_MAKE) app-clean
ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
	rm -f $(SECURE_BOOTLOADER_KEY) $(BOOTLOADER_DIGEST_BIN)
endif