OVMS3-idf/components/esp32/dport_access.c

182 lines
5.6 KiB
C
Raw Normal View History

// Copyright 2010-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
* DPORT access is used for do protection when dual core access DPORT internal register and APB register via DPORT simultaneously
* This function will be initialize after FreeRTOS startup.
* When cpu0 want to access DPORT register, it should notify cpu1 enter in high-priority interrupt for be mute. When cpu1 already in high-priority interrupt,
* cpu0 can access DPORT register. Currently, cpu1 will wait for cpu0 finish access and exit high-priority interrupt.
*/
#include <stdint.h>
#include <string.h>
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_intr.h"
#include "rom/ets_sys.h"
#include "rom/uart.h"
#include "soc/cpu.h"
#include "soc/dport_reg.h"
#include "soc/spi_reg.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "freertos/queue.h"
#include "freertos/portmacro.h"
#include "xtensa/core-macros.h"
static portMUX_TYPE g_dport_mux = portMUX_INITIALIZER_UNLOCKED;
#define DPORT_CORE_STATE_IDLE 0
#define DPORT_CORE_STATE_RUNNING 1
static uint32_t volatile dport_core_state[portNUM_PROCESSORS]; //cpu is already run
/* these global variables are accessed from interrupt vector, hence not declared as static */
uint32_t volatile dport_access_start[portNUM_PROCESSORS]; //dport register could be accessed
uint32_t volatile dport_access_end[portNUM_PROCESSORS]; //dport register is accessed over
static uint32_t volatile dport_access_ref[portNUM_PROCESSORS]; //dport access reference
#ifdef DPORT_ACCESS_BENCHMARK
#define DPORT_ACCESS_BENCHMARK_STORE_NUM
static uint32_t ccount_start[portNUM_PROCESSORS];
static uint32_t ccount_end[portNUM_PROCESSORS];
static uint32_t ccount_margin[portNUM_PROCESSORS][DPORT_ACCESS_BENCHMARK_STORE_NUM];
static uint32_t ccount_margin_cnt;
#endif
/* stall other cpu that this cpu is pending to access dport register start */
void IRAM_ATTR esp_dport_access_stall_other_cpu_start(void)
{
#ifndef CONFIG_FREERTOS_UNICORE
int cpu_id = xPortGetCoreID();
if (dport_core_state[0] == DPORT_CORE_STATE_IDLE
|| dport_core_state[1] == DPORT_CORE_STATE_IDLE) {
return;
}
#ifdef DPORT_ACCESS_BENCHMARK
ccount_start[cpu_id] = XTHAL_GET_CCOUNT();
#endif
portDISABLE_INTERRUPTS();
if (dport_access_ref[cpu_id] == 0) {
portENTER_CRITICAL_ISR(&g_dport_mux);
dport_access_start[cpu_id] = 0;
dport_access_end[cpu_id] = 0;
if (cpu_id == 0) {
_DPORT_REG_WRITE(DPORT_CPU_INTR_FROM_CPU_3_REG, DPORT_CPU_INTR_FROM_CPU_3); //interrupt on cpu1
} else {
_DPORT_REG_WRITE(DPORT_CPU_INTR_FROM_CPU_2_REG, DPORT_CPU_INTR_FROM_CPU_2); //interrupt on cpu0
}
while (!dport_access_start[cpu_id]) {};
REG_READ(SPI_DATE_REG(3)); //just read a APB register sure that the APB-bus is idle
}
dport_access_ref[cpu_id]++;
#endif /* CONFIG_FREERTOS_UNICORE */
}
/* stall other cpu that this cpu is pending to access dport register end */
void IRAM_ATTR esp_dport_access_stall_other_cpu_end(void)
{
#ifndef CONFIG_FREERTOS_UNICORE
int cpu_id = xPortGetCoreID();
if (dport_core_state[0] == DPORT_CORE_STATE_IDLE
|| dport_core_state[1] == DPORT_CORE_STATE_IDLE) {
return;
}
if (dport_access_ref[cpu_id] == 0) {
assert(0);
}
dport_access_ref[cpu_id]--;
if (dport_access_ref[cpu_id] == 0) {
dport_access_end[cpu_id] = 1;
portEXIT_CRITICAL_ISR(&g_dport_mux);
}
portENABLE_INTERRUPTS();
#ifdef DPORT_ACCESS_BENCHMARK
ccount_end[cpu_id] = XTHAL_GET_CCOUNT();
ccount_margin[cpu_id][ccount_margin_cnt] = ccount_end[cpu_id] - ccount_start[cpu_id];
ccount_margin_cnt = (ccount_margin_cnt + 1)&(DPORT_ACCESS_BENCHMARK_STORE_NUM - 1);
#endif
#endif /* CONFIG_FREERTOS_UNICORE */
}
static void dport_access_init_core0(void *arg)
{
int core_id = xPortGetCoreID();
assert(core_id == 0);
vPortCPUInitializeMutex(&g_dport_mux);
ESP_INTR_DISABLE(ETS_DPORT_INUM);
intr_matrix_set(core_id, ETS_FROM_CPU_INTR2_SOURCE, ETS_DPORT_INUM);
ESP_INTR_ENABLE(ETS_DPORT_INUM);
dport_access_ref[core_id] = 0;
dport_access_start[core_id] = 0;
dport_access_end[core_id] = 0;
dport_core_state[core_id] = DPORT_CORE_STATE_RUNNING;
vTaskDelete(NULL);
}
static void dport_access_init_core1(void *arg)
{
int core_id = xPortGetCoreID();
assert(core_id == 1);
ESP_INTR_DISABLE(ETS_DPORT_INUM);
intr_matrix_set(core_id, ETS_FROM_CPU_INTR3_SOURCE, ETS_DPORT_INUM);
ESP_INTR_ENABLE(ETS_DPORT_INUM);
dport_access_ref[core_id] = 0;
dport_access_start[core_id] = 0;
dport_access_end[core_id] = 0;
dport_core_state[core_id] = DPORT_CORE_STATE_RUNNING;
vTaskDelete(NULL);
}
/* This initialise should be really effective after vTaskStartScheduler */
void esp_dport_access_int_init(void)
{
if (xPortGetCoreID() == 0) {
xTaskCreatePinnedToCore(&dport_access_init_core0, "dport0", 512, NULL, 5, NULL, 0);
} else {
xTaskCreatePinnedToCore(&dport_access_init_core1, "dport1", 512, NULL, 5, NULL, 1);
}
}