OVMS3-idf/components/driver/test/adc_dma_test/test_esp32s2.c

494 lines
17 KiB
C
Raw Normal View History

// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
Tests for the adc device driver
*/
#include "esp_system.h"
#include "driver/adc.h"
#include "driver/dac.h"
#include "driver/rtc_io.h"
#include "driver/gpio.h"
#include "unity.h"
#include "esp_system.h"
#include "esp_event.h"
#include "esp_wifi.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "test_utils.h"
#include "soc/spi_reg.h"
#include "soc/adc_periph.h"
#if !DISABLED_FOR_TARGETS(ESP8266, ESP32) // This testcase for ESP32S2
#include "soc/system_reg.h"
static const char *TAG = "test_adc";
#define PLATFORM_SELECT (1) //0: pxp; 1: chip
#if (PLATFORM_SELECT == 0) //PXP platform
#include "soc/apb_ctrl_reg.h"
#define SET_BREAK_POINT(flag) REG_WRITE(APB_CTRL_DATE_REG, flag)
//PXP clk is slower.
#define SYS_DELAY_TIME_MOM (1/40)
#define RTC_SLOW_CLK_FLAG 1 // Slow clock is 32KHz.
static void test_pxp_deinit_io(void)
{
for (int i = 0; i < 22; i++) {
rtc_gpio_init(i);
}
}
#else
//PXP clk is slower.
#define SET_BREAK_POINT(flag)
#define SYS_DELAY_TIME_MOM (1)
#define RTC_SLOW_CLK_FLAG 0 // Slow clock is 32KHz.
#endif
#define ADC_REG_BASE_TEST() ({ \
TEST_ASSERT_EQUAL_UINT32(REG_GET_FIELD(APB_SARADC_APB_CTRL_DATE_REG, APB_SARADC_APB_CTRL_DATE), APB_SARADC.apb_ctrl_date); \
TEST_ASSERT_EQUAL_UINT32(REG_GET_FIELD(SENS_SARDATE_REG, SENS_SAR_DATE), SENS.sardate.sar_date); \
TEST_ASSERT_EQUAL_UINT32(REG_GET_FIELD(RTC_IO_DATE_REG, RTC_IO_IO_DATE), RTCIO.date.date); \
})
#define TEST_ADC_TRIGGER_INTERVAL_DEFAULT (40)
#define TEST_ADC_COUNT_NUM (10)
#define TEST_ADC_CHANNEL (10)
static adc_channel_t adc_list[TEST_ADC_CHANNEL] = {
ADC_CHANNEL_0,
ADC_CHANNEL_1,
ADC_CHANNEL_2,
ADC_CHANNEL_3,
ADC_CHANNEL_4,
ADC_CHANNEL_5,
ADC_CHANNEL_6,
ADC_CHANNEL_7,
ADC_CHANNEL_8,
ADC_CHANNEL_9,
};
/* For ESP32S2, it should use same atten, or, it will have error. */
// #define TEST_ADC_ATTEN_DEFAULT (ADC_ATTEN_11db)
static adc_atten_t adc_atten[ADC_ATTEN_MAX] = {
ADC_ATTEN_DB_0,
ADC_ATTEN_DB_2_5,
ADC_ATTEN_DB_6,
ADC_ATTEN_DB_11
};
/*******************************************/
/** SPI DMA INIT CODE */
/*******************************************/
extern esp_err_t adc_digi_reset(void);
typedef struct dma_link {
struct {
uint32_t size : 12; //the size of buf, must be able to be divisible by 4
uint32_t length: 12; //in link,
uint32_t reversed: 6; //reversed
uint32_t eof: 1; //if this dma link is the last one, you shoule set this bit 1.
uint32_t owner: 1; //the owner of buf, bit 1 : DMA, bit 0 : CPU.
} des;
uint8_t *buf; //the pointer of buf
struct dma_link *pnext; //point to the next dma linker, if this link is the last one, set it NULL.
} dma_link_t;
/* Work mode.
* sigle: eof_num;
* double: SAR_EOF_NUMBER/2;
* alter: eof_num;
* */
#define SAR_SIMPLE_NUM 64
#define SAR_DMA_DATA_SIZE(unit, sample_num) (SAR_EOF_NUMBER(unit, sample_num) * 2) // 1 adc -> 2 byte
#define SAR_EOF_NUMBER(unit, sample_num) ((sample_num) * (unit))
#define SAR_MEAS_LIMIT_NUM(unit, sample_num) (SAR_EOF_NUMBER(unit, sample_num) / unit)
static uint8_t link_buf[2][SAR_DMA_DATA_SIZE(2, SAR_SIMPLE_NUM)] = {0};
static dma_link_t dma1;
static dma_link_t dma2;
static void dma_linker_init(adc_unit_t adc, bool is_loop)
{
dma1.des.eof = 0;
dma1.des.owner = 1;
dma1.pnext = &dma2;
dma1.des.size = SAR_DMA_DATA_SIZE((adc > 2) ? 2 : 1, SAR_SIMPLE_NUM);
dma1.des.length = 0; //For input buffer, this field is no use.
dma1.buf = &link_buf[0][0];
dma2.des.eof = 1;
dma2.des.owner = 1;
if (is_loop) {
dma2.pnext = &dma1;
} else {
dma2.pnext = NULL;
}
dma2.des.size = SAR_DMA_DATA_SIZE((adc > 2) ? 2 : 1, SAR_SIMPLE_NUM);
dma2.des.length = 0; //For input buffer, this field is no use.
dma2.buf = &link_buf[1][0];
REG_SET_BIT(DPORT_PERIP_CLK_EN_REG, DPORT_APB_SARADC_CLK_EN_M);
REG_SET_BIT(DPORT_PERIP_CLK_EN_REG, DPORT_SPI3_DMA_CLK_EN_M);
REG_SET_BIT(DPORT_PERIP_CLK_EN_REG, DPORT_SPI3_CLK_EN);
REG_CLR_BIT(DPORT_PERIP_RST_EN_REG, DPORT_SPI3_DMA_RST_M);
REG_CLR_BIT(DPORT_PERIP_RST_EN_REG, DPORT_SPI3_RST_M);
uint32_t dma_pointer = (uint32_t)&dma1;
SET_PERI_REG_BITS(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_ADDR, dma_pointer, 0);
REG_SET_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_START);
REG_CLR_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_STOP);
REG_SET_BIT(SPI_DMA_INT_ENA_REG(3), SPI_IN_SUC_EOF_INT_ENA);
printf("reg addr 0x%08x 0x%08x \n", SPI_DMA_IN_LINK_REG(3), dma_pointer);
}
static void dma_linker_restart(void)
{
REG_SET_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_STOP);
REG_CLR_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_START);
REG_SET_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_RESTART_M);
REG_CLR_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_RESTART_M);
REG_SET_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_START);
REG_CLR_BIT(SPI_DMA_IN_LINK_REG(3), SPI_INLINK_STOP);
adc_digi_reset();
}
/*******************************************/
/** SPI DMA INIT CODE END */
/*******************************************/
/**
* TEST TOOLS
* Note: internal pullup/pulldown is weak energy. if enabled WiFi, it should be need outside pullup/pulldown.
*/
#define ADC_GET_IO_NUM(periph, channel) (adc_channel_io_map[periph][channel])
static void adc_fake_tie_middle(adc_unit_t adc)
{
if (adc & ADC_UNIT_1) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_1, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_en(ADC_GET_IO_NUM(0, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_en(ADC_GET_IO_NUM(0, adc_list[i])));
}
}
if (adc & ADC_UNIT_2) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_2, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_en(ADC_GET_IO_NUM(1, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_en(ADC_GET_IO_NUM(1, adc_list[i])));
}
}
vTaskDelay(10 / portTICK_RATE_MS); // To wait stable of IO.
}
static void adc_fake_tie_high(adc_unit_t adc)
{
if (adc & ADC_UNIT_1) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_1, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_en(ADC_GET_IO_NUM(0, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_dis(ADC_GET_IO_NUM(0, adc_list[i])));
}
}
if (adc & ADC_UNIT_2) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_2, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_en(ADC_GET_IO_NUM(1, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_dis(ADC_GET_IO_NUM(1, adc_list[i])));
}
}
vTaskDelay(10 / portTICK_RATE_MS); // To wait stable of IO.
}
static void adc_fake_tie_low(adc_unit_t adc)
{
if (adc & ADC_UNIT_1) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_1, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_dis(ADC_GET_IO_NUM(0, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_en(ADC_GET_IO_NUM(0, adc_list[i])));
}
}
if (adc & ADC_UNIT_2) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_2, adc_list[i]);
TEST_ESP_OK(rtc_gpio_pullup_dis(ADC_GET_IO_NUM(1, adc_list[i])));
TEST_ESP_OK(rtc_gpio_pulldown_en(ADC_GET_IO_NUM(1, adc_list[i])));
}
}
vTaskDelay(10 / portTICK_RATE_MS); // To wait stable of IO.
}
static void adc_io_normal(adc_unit_t adc)
{
if (adc & ADC_UNIT_1) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_1, adc_list[i]);
}
}
if (adc & ADC_UNIT_2) {
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc_gpio_init(ADC_UNIT_2, adc_list[i]);
}
}
vTaskDelay(10 / portTICK_RATE_MS); // To wait stable of IO.
}
#define DEBUG_CHECK_ENABLE 0
#define DEBUG_PRINT_ENABLE 1
#define DEBUG_CHECK_ERROR 100
static esp_err_t adc_dma_data_check(adc_unit_t adc, int ideal_level)
{
#if DEBUG_CHECK_ENABLE
int unit_old = 1;
int ch_cnt = 0;
#endif
for (int cnt = 0; cnt < 2; cnt++) {
ets_printf("\n[%s] link_buf[%d]: \n", __func__, cnt % 2);
for (int i = 0; i < SAR_DMA_DATA_SIZE((adc > 2) ? 2 : 1, SAR_SIMPLE_NUM); i++, i++) {
uint16_t h = link_buf[cnt % 2][i + 1], l = link_buf[cnt % 2][i];
uint16_t temp = (h << 8 | l);
adc_digi_output_data_t *data = (adc_digi_output_data_t *)&temp;
if (adc > ADC_UNIT_2) { //ADC_ENCODE_11BIT
#if DEBUG_PRINT_ENABLE
if (i % 16 == 0) {
ets_printf("\n");
}
ets_printf("[%d_%d_%04x] ", data->type2.unit, data->type2.channel, data->type2.data);
#endif
#if DEBUG_CHECK_ENABLE
TEST_ASSERT_NOT_EQUAL(unit_old, data->type2.unit);
unit_old = data->type2.unit;
if (data->type2.channel > ADC_CHANNEL_MAX) {
printf("Data invalid [%d]\n", data->type2.channel);
continue;
}
int cur_ch = ((ch_cnt++ / 2) % TEST_ADC_CHANNEL);
TEST_ASSERT_EQUAL( data->type2.channel, adc_list[cur_ch] );
/*Check data channel unit*/
if (ideal_level == 1) {
TEST_ASSERT_INT_WITHIN( DEBUG_CHECK_ERROR, 0x7FF, data->type2.data );
} else if (ideal_level == 0) {
TEST_ASSERT_INT_WITHIN( DEBUG_CHECK_ERROR, 0, data->type2.data );
} else {
// middle vol
}
#endif
} else { //ADC_ENCODE_12BIT
#if DEBUG_PRINT_ENABLE
if (i % 16 == 0) {
ets_printf("\n");
}
ets_printf("[%d_%04x] ", data->type1.channel, data->type1.data);
#endif
#if DEBUG_CHECK_ENABLE
/*Check data channel */
if (ideal_level == 1) {
if (data->type1.data != 0XFFF) {
return ESP_FAIL;
}
} else if (ideal_level == 0) {
if (data->type1.data != 0) {
return ESP_FAIL;
}
} else {
if (data->type1.data == 0 || data->type1.data == 0XFFF) {
return ESP_FAIL;
}
}
int cur_ch = ((i / 2) % TEST_ADC_CHANNEL);
if (data->type1.channel != adc_list[cur_ch] ) {
return ESP_FAIL;
}
#endif
}
link_buf[cnt % 2][i] = 0;
link_buf[cnt % 2][i + 1] = 0;
}
ets_printf("\n");
}
return ESP_OK;
}
static esp_err_t adc_dma_data_multi_st_check(adc_unit_t adc)
{
ESP_LOGI(TAG, "adc IO fake tie low, test ...");
adc_fake_tie_low(adc);
TEST_ESP_OK( adc_digi_stop() );
dma_linker_restart();
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
TEST_ESP_OK( adc_digi_start() );
while (0 == REG_GET_BIT(SPI_DMA_INT_ST_REG(3), SPI_IN_SUC_EOF_INT_ST)) {};
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
if ( ESP_OK != adc_dma_data_check(adc, 0)) {
return ESP_FAIL;
}
ESP_LOGI(TAG, "adc IO fake tie high, test ...");
adc_fake_tie_high(adc);
TEST_ESP_OK( adc_digi_stop() );
dma_linker_restart();
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
TEST_ESP_OK( adc_digi_start() );
while (0 == REG_GET_BIT(SPI_DMA_INT_ST_REG(3), SPI_IN_SUC_EOF_INT_ST)) {};
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
if ( ESP_OK != adc_dma_data_check(adc, 1)) {
return ESP_FAIL;
}
ESP_LOGI(TAG, "adc IO fake tie middle, test ...");
adc_fake_tie_middle(adc);
TEST_ESP_OK( adc_digi_stop() );
dma_linker_restart();
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
TEST_ESP_OK( adc_digi_start() );
while (0 == REG_GET_BIT(SPI_DMA_INT_ST_REG(3), SPI_IN_SUC_EOF_INT_ST)) {};
REG_SET_BIT(SPI_DMA_INT_CLR_REG(3), SPI_IN_SUC_EOF_INT_CLR);
if ( ESP_OK != adc_dma_data_check(adc, 2)) {
return ESP_FAIL;
}
TEST_ESP_OK( adc_digi_stop() );
adc_io_normal(adc);
return ESP_OK;
}
#include "soc/apb_saradc_struct.h"
/**
* @brief Test the partten table setting. It's easy wrong.
*
* @param adc_n ADC unit.
* @param in_partten_len The length of partten be set.
* @param in_partten_len The channel number of the last message.
*/
static esp_err_t adc_check_patt_table(adc_unit_t adc, uint32_t in_partten_len, adc_channel_t in_last_ch)
{
esp_err_t ret = ESP_FAIL;
uint8_t index = (in_partten_len - 1) / 4;
uint8_t offset = 24 - ((in_partten_len - 1) % 4) * 8;
uint32_t temp = 0, len;
if (adc & ADC_UNIT_1) {
len = APB_SARADC.ctrl.sar1_patt_len + 1;
temp = APB_SARADC.sar1_patt_tab[index];
printf("patt1 len %d\n", len);
printf("patt1 0x%08x\n", APB_SARADC.sar1_patt_tab[0]);
printf("patt1 0x%08x\n", APB_SARADC.sar1_patt_tab[1]);
printf("patt1 0x%08x\n", APB_SARADC.sar1_patt_tab[2]);
printf("patt1 0x%08x\n", APB_SARADC.sar1_patt_tab[3]);
if (in_partten_len == len) {
if (in_last_ch == (((temp >> (offset + 4))) & 0xf)) {
ret = ESP_OK;
}
}
}
if (adc & ADC_UNIT_2) {
len = APB_SARADC.ctrl.sar2_patt_len + 1;
temp = APB_SARADC.sar2_patt_tab[index];
printf("patt2 len %d\n", len);
printf("patt2 0x%08x\n", APB_SARADC.sar2_patt_tab[0]);
printf("patt2 0x%08x\n", APB_SARADC.sar2_patt_tab[1]);
printf("patt2 0x%08x\n", APB_SARADC.sar2_patt_tab[2]);
printf("patt2 0x%08x\n", APB_SARADC.sar2_patt_tab[3]);
if (in_partten_len == len) {
if (in_last_ch == (((temp >> (offset + 4))) & 0xf)) {
ret = ESP_OK;
}
}
}
return ret;
}
int test_adc_dig_dma_single_unit(adc_unit_t adc)
{
ESP_LOGI(TAG, " >> %s << ", __func__);
ESP_LOGI(TAG, " >> adc unit: %x << ", adc);
TEST_ESP_OK( adc_digi_init() );
/* arbiter config */
adc_arbiter_t arb_cfg = {
.mode = ADC_ARB_MODE_FIX,
.dig_pri = 0,
.pwdet_pri = 2,
.rtc_pri = 1,
};
TEST_ESP_OK( adc_arbiter_config(ADC_UNIT_2, &arb_cfg) ); // If you want use force
adc_digi_config_t config = {
.conv_limit_en = false,
.conv_limit_num = 0,
.interval = TEST_ADC_TRIGGER_INTERVAL_DEFAULT,
.dig_clk.use_apll = 0, // APB clk
.dig_clk.div_num = 2, // 80 MHz / 160 = 500 KHz
.dig_clk.div_b = 1,
.dig_clk.div_a = 1,
.dma_eof_num = SAR_EOF_NUMBER((adc > 2) ? 2 : 1, SAR_SIMPLE_NUM),
};
/* Config pattern table */
adc_digi_pattern_table_t adc1_patt[TEST_ADC_CHANNEL] = {0};
adc_digi_pattern_table_t adc2_patt[TEST_ADC_CHANNEL] = {0};
if (adc & ADC_UNIT_1) {
config.adc1_pattern_len = TEST_ADC_CHANNEL;
config.adc1_pattern = adc1_patt;
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc1_patt[i].atten = adc_atten[i%ADC_ATTEN_MAX];
adc1_patt[i].channel = adc_list[i];
adc_gpio_init(ADC_UNIT_1, adc_list[i]);
}
}
if (adc & ADC_UNIT_2) {
config.adc2_pattern_len = TEST_ADC_CHANNEL;
config.adc2_pattern = adc2_patt;
for (int i = 0; i < TEST_ADC_CHANNEL; i++) {
adc2_patt[i].atten = adc_atten[i%ADC_ATTEN_MAX];
adc2_patt[i].channel = adc_list[i];
adc_gpio_init(ADC_UNIT_2, adc_list[i]);
}
}
if (adc == ADC_UNIT_1) {
config.conv_mode = ADC_CONV_SINGLE_UNIT_1;
config.format = ADC_DIGI_FORMAT_12BIT;
} else if (adc == ADC_UNIT_2) {
config.conv_mode = ADC_CONV_SINGLE_UNIT_2;
config.format = ADC_DIGI_FORMAT_12BIT;
} else if (adc == ADC_UNIT_BOTH) {
config.conv_mode = ADC_CONV_BOTH_UNIT;
config.format = ADC_DIGI_FORMAT_11BIT;
} else if (adc == ADC_UNIT_ALTER) {
config.conv_mode = ADC_CONV_ALTER_UNIT;
config.format = ADC_DIGI_FORMAT_11BIT;
}
TEST_ESP_OK( adc_digi_controller_config(&config) );
dma_linker_init(adc, false);
TEST_ESP_OK( adc_check_patt_table(adc, TEST_ADC_CHANNEL, adc_list[TEST_ADC_CHANNEL - 1]) );
TEST_ESP_OK( adc_digi_start() );
adc_dma_data_multi_st_check(adc);
return 0;
}
TEST_CASE("ADC DMA single read", "[ADC]")
{
test_adc_dig_dma_single_unit(ADC_UNIT_BOTH);
test_adc_dig_dma_single_unit(ADC_UNIT_ALTER);
test_adc_dig_dma_single_unit(ADC_UNIT_1);
test_adc_dig_dma_single_unit(ADC_UNIT_2);
}
#endif // !DISABLED_FOR_TARGETS(ESP8266, ESP32)