OVMS3-idf/components/mbedtls/port/include/esp32s2/gcm.h

239 lines
9.1 KiB
C
Raw Normal View History

2019-12-26 07:25:24 +00:00
/**
* \brief AES block cipher, ESP32C hardware accelerated version
* Based on mbedTLS FIPS-197 compliant version.
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* Additions Copyright (C) 2019-2020, Espressif Systems (Shanghai) PTE Ltd
2019-12-26 07:25:24 +00:00
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*
*/
#ifndef ESP_GCM_H
#define ESP_GCM_H
#include "aes.h"
#include "mbedtls/cipher.h"
#ifdef __cplusplus
extern "C" {
#endif
2019-12-26 07:25:24 +00:00
#define MBEDTLS_ERR_GCM_AUTH_FAILED -0x0012 /**< Authenticated decryption failed. */
#define MBEDTLS_ERR_GCM_BAD_INPUT -0x0014 /**< Bad input parameters to function.*/
2019-12-26 07:25:24 +00:00
typedef enum {
ESP_AES_GCM_STATE_INIT,
ESP_AES_GCM_STATE_UPDATE,
ESP_AES_GCM_STATE_FINISH
} esp_aes_gcm_state;
2019-12-26 07:25:24 +00:00
/**
* \brief The GCM context structure.
*/
typedef struct {
uint8_t H[16]; /*!< Initial hash value */
uint8_t ghash[16]; /*!< GHASH value. */
uint8_t J0[16];
uint64_t HL[16]; /*!< Precalculated HTable low. */
uint64_t HH[16]; /*!< Precalculated HTable high. */
uint8_t ori_j0[16]; /*!< J0 from first iteration. */
const uint8_t *iv;
2019-12-26 07:25:24 +00:00
size_t iv_len; /*!< The length of IV. */
uint64_t aad_len; /*!< The total length of the additional data. */
size_t data_len;
int mode;
2019-12-26 07:25:24 +00:00
const unsigned char *aad; /*!< The additional data. */
esp_aes_context aes_ctx;
esp_aes_gcm_state gcm_state;
} esp_gcm_context;
2019-12-26 07:25:24 +00:00
/**
* \brief This function initializes the specified GCM context
*
* \param ctx The GCM context to initialize.
*/
void esp_aes_gcm_init( esp_gcm_context *ctx);
2019-12-26 07:25:24 +00:00
/**
* \brief This function associates a GCM context with a
* key.
*
* \param ctx The GCM context to initialize.
* \param cipher The 128-bit block cipher to use.
* \param key The encryption key.
* \param keybits The key size in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
* \return \c 0 on success.
* \return A cipher-specific error code on failure.
*/
int esp_aes_gcm_setkey( esp_gcm_context *ctx,
2019-12-26 07:25:24 +00:00
mbedtls_cipher_id_t cipher,
const unsigned char *key,
unsigned int keybits );
/**
* \brief This function starts a GCM encryption or decryption
* operation.
*
* \param ctx The GCM context.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data, or NULL
* if \p add_len is 0.
* \param add_len The length of the additional data. If 0,
* \p add is NULL.
*
* \return \c 0 on success.
*/
int esp_aes_gcm_starts( esp_gcm_context *ctx,
int mode,
const unsigned char *iv,
size_t iv_len,
const unsigned char *aad,
size_t aad_len );
2019-12-26 07:25:24 +00:00
/**
* \brief This function feeds an input buffer into an ongoing GCM
* encryption or decryption operation.
*
* ` The function expects input to be a multiple of 16
* Bytes. Only the last call before calling
* mbedtls_gcm_finish() can be less than 16 Bytes.
*
* \note For decryption, the output buffer cannot be the same as
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context.
* \param length The length of the input data. This must be a multiple of
* 16 except in the last call before mbedtls_gcm_finish().
* \param input The buffer holding the input data.
* \param output The buffer for holding the output data.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
*/
int esp_aes_gcm_update( esp_gcm_context *ctx,
2019-12-26 07:25:24 +00:00
size_t length,
const unsigned char *input,
unsigned char *output );
/**
* \brief This function finishes the GCM operation and generates
* the authentication tag.
*
* It wraps up the GCM stream, and generates the
* tag. The tag can have a maximum length of 16 Bytes.
*
* \param ctx The GCM context.
* \param tag The buffer for holding the tag.
* \param tag_len The length of the tag to generate. Must be at least four.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
*/
int esp_aes_gcm_finish( esp_gcm_context *ctx,
unsigned char *tag,
size_t tag_len );
2019-12-26 07:25:24 +00:00
/**
* \brief This function clears a GCM context
*
* \param ctx The GCM context to clear.
*/
void esp_aes_gcm_free( esp_gcm_context *ctx);
2019-12-26 07:25:24 +00:00
/**
* \brief This function performs GCM encryption or decryption of a buffer.
*
* \note For encryption, the output buffer can be the same as the
* input buffer. For decryption, the output buffer cannot be
* the same as input buffer. If the buffers overlap, the output
* buffer must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context to use for encryption or decryption.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
* \param length The length of the input data. This must be a multiple of
* 16 except in the last call before mbedtls_gcm_finish().
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add_len The length of the additional data.
* \param input The buffer holding the input data.
* \param output The buffer for holding the output data.
* \param tag_len The length of the tag to generate.
* \param tag The buffer for holding the tag.
*
* \return \c 0 on success.
*/
int esp_aes_gcm_crypt_and_tag( esp_gcm_context *ctx,
int mode,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *input,
unsigned char *output,
size_t tag_len,
unsigned char *tag );
2019-12-26 07:25:24 +00:00
/**
* \brief This function performs a GCM authenticated decryption of a
* buffer.
*
* \note For decryption, the output buffer cannot be the same as
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context.
* \param length The length of the input data. This must be a multiple
* of 16 except in the last call before mbedtls_gcm_finish().
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add_len The length of the additional data.
* \param tag The buffer holding the tag.
* \param tag_len The length of the tag.
* \param input The buffer holding the input data.
* \param output The buffer for holding the output data.
*
* \return 0 if successful and authenticated.
* \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
*/
int esp_aes_gcm_auth_decrypt( esp_gcm_context *ctx,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *tag,
size_t tag_len,
const unsigned char *input,
unsigned char *output );
2019-12-26 07:25:24 +00:00
#ifdef __cplusplus
}
#endif
#endif /* gcm.h */