OVMS3-idf/examples/bluetooth/ble_spp_server/sdkconfig.defaults

# Override some defaults so BT stack is enabled
# in this example

#
# BT config
#
CONFIG_BT_ENABLED=y
CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
CONFIG_BTDM_CONTROLLER_MODE_BTDM=
#
# ESP32-specific config
#
CONFIG_ESP32_ENABLE_STACK_BT=y
# CONFIG_ESP32_ENABLE_STACK_NONE is not set
CONFIG_MEMMAP_BT=y
component/bt: add example for ble spp server - the first characteristic is used to receive data from client. - the second characteristic is used to notify data to client. - the third characteristic is used to receive command from client, user can add code to process the command. - the fourth characteristic is used to notify status to client. - the fifth characteristic is used to keep ble connection 2017-07-21 08:51:48 +00:00			`# Override some defaults so BT stack is enabled`
			`# in this example`

			`#`
			`# BT config`
			`#`
			`CONFIG_BT_ENABLED=y`
component/bt : decrease memory consumption by conn number 1. BLE only with 9(max) connection will decrease 3K DRAM 2. BR/EDR only with 7(max) connection will decrease 16K DRAM 3. Any of BLE or BR/EDR connection number decrease will also decrease DRAM consumption 4. Decrease one BLE connection will save about 1KB DRAM 5. Decrease one BR/EDR ACL connection will save about 1.2KB DRAM 6. Decrease one BR/EDR SCO/eSCO will save 2KB DRAM. 7. fix some definition and kconfig 8. remove 1.2k of vhci tx cache and make .bss & .data to heap about 1.4K 9. modify BT Reserved Memory size and modify example to support new bt kconfig 2018-06-15 13:40:51 +00:00			`CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y`
			`CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=`
			`CONFIG_BTDM_CONTROLLER_MODE_BTDM=`
component/bt: add example for ble spp server - the first characteristic is used to receive data from client. - the second characteristic is used to notify data to client. - the third characteristic is used to receive command from client, user can add code to process the command. - the fourth characteristic is used to notify status to client. - the fifth characteristic is used to keep ble connection 2017-07-21 08:51:48 +00:00			`#`
			`# ESP32-specific config`
			`#`
			`CONFIG_ESP32_ENABLE_STACK_BT=y`
			`# CONFIG_ESP32_ENABLE_STACK_NONE is not set`
			`CONFIG_MEMMAP_BT=y`