Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/driver/periph_ctrl.c

187 lines
8.4 KiB
C
Raw Normal View History

Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <esp_types.h>
#include "esp_intr.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/xtensa_api.h"
#include "soc/dport_reg.h"
#include "driver/periph_ctrl.h"
static portMUX_TYPE periph_spinlock = portMUX_INITIALIZER_UNLOCKED;
void periph_module_enable(periph_module_t periph)
{
portENTER_CRITICAL(&periph_spinlock);
switch(periph) {
add RMT driver and example
2016-11-10 03:23:40 +00:00
case PERIPH_RMT_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_RMT_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_RMT_RST);
break;
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
case PERIPH_LEDC_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_LEDC_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_LEDC_RST);
break;
case PERIPH_UART0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART_RST);
break;
case PERIPH_UART1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART1_RST);
break;
case PERIPH_UART2_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART2_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART2_RST);
break;
case PERIPH_I2C0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2C_EXT0_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2C_EXT0_RST);
break;
case PERIPH_I2C1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2C_EXT1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2C_EXT1_RST);
break;
case PERIPH_I2S0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2S0_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2S0_RST);
break;
case PERIPH_I2S1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2S1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2S1_RST);
break;
case PERIPH_TIMG0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_TIMERGROUP_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_TIMERGROUP_RST);
break;
case PERIPH_TIMG1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_TIMERGROUP1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_TIMERGROUP1_RST);
break;
case PERIPH_PWM0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM0_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM0_RST);
break;
case PERIPH_PWM1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM1_RST);
break;
case PERIPH_PWM2_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM2_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM2_RST);
break;
case PERIPH_PWM3_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM3_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM3_RST);
break;
case PERIPH_UHCI0_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UHCI0_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UHCI0_RST);
break;
case PERIPH_UHCI1_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UHCI1_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UHCI1_RST);
break;
driver: Add PCNT code 1. add PCNT module in periph_ctrl.c/.h 2. add description of PCNT status in pcnt_struct.h 3. add PCNT driver code 4. add PCNT example code.
2016-11-21 10:17:07 +00:00
case PERIPH_PCNT_MODULE:
SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PCNT_CLK_EN);
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PCNT_RST);
break;
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
default:
break;
}
Modify spinlock error in periph_ctrl.c
2016-09-29 03:50:25 +00:00
portEXIT_CRITICAL(&periph_spinlock);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
}
void periph_module_disable(periph_module_t periph)
{
portENTER_CRITICAL(&periph_spinlock);
switch(periph) {
add pcnt.rst
2016-11-23 11:07:30 +00:00
case PERIPH_RMT_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_RMT_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_RMT_RST);
break;
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
case PERIPH_LEDC_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_LEDC_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_LEDC_RST);
break;
case PERIPH_UART0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART_RST);
break;
case PERIPH_UART1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART1_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART1_RST);
break;
case PERIPH_UART2_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART2_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART2_RST);
break;
case PERIPH_I2C0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2C_EXT0_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2C_EXT0_RST);
break;
case PERIPH_I2C1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2C_EXT0_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2C_EXT1_RST);
break;
case PERIPH_I2S0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2S0_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2S0_RST);
break;
case PERIPH_I2S1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2S1_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2S1_RST);
break;
case PERIPH_TIMG0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_TIMERGROUP_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_TIMERGROUP_RST);
break;
case PERIPH_TIMG1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_TIMERGROUP1_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_TIMERGROUP1_RST);
break;
case PERIPH_PWM0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM0_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM0_RST);
break;
case PERIPH_PWM1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM1_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM1_RST);
break;
case PERIPH_PWM2_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM2_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM2_RST);
break;
case PERIPH_PWM3_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PWM3_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PWM3_RST);
break;
case PERIPH_UHCI0_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UHCI0_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UHCI0_RST);
break;
case PERIPH_UHCI1_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UHCI1_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UHCI1_RST);
break;
add pcnt.rst
2016-11-23 11:07:30 +00:00
case PERIPH_PCNT_MODULE:
CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_PCNT_CLK_EN);
SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_PCNT_RST);
break;
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
default:
break;
}
Modify spinlock error in periph_ctrl.c
2016-09-29 03:50:25 +00:00
portEXIT_CRITICAL(&periph_spinlock);
Modify LEDC driver 1. configure LEDC timer saparately 2. add peripher_crtl.c/.h To enable the peripheral modules, we have to set/clear the control register in dport_reg.h. These bits are disabled by default and they are all in a same register, so we need to add a lock on that. 3. add include esp_err.h in gpio.h
2016-09-28 15:20:34 +00:00
}
Reference in a new issue Copy permalink